HelpPC 2.10 Quick Reference Utility Copyright 1991 David Jurgens

             INT 1E - Disk Initialization Parameter Table Vector

       - not an interrupt, but a far pointer to the diskette base table
       - this table contains initialization parameters for the disk
         controller used during formatting, reading, and writing to a disk

       Disk Initialization Parameter Table Vector Definition:

       Offset     Description

         00  │7│6│5│4│3│2│1│0│  Disk Controller Mode byte 1
              │ │ │ │ └─┴─┴─┴────  head step rate in milliseconds (0-F)
              └─┴─┴─┴───────────  head unload time in milliseconds (0-F)

         01  │7│6│5│4│3│2│1│0│  Disk Controller Mode byte 2
              │ │ │ │ │ │ │ └──── DMA flag (0 = use DMA)
              └─┴─┴─┴─┴─┴─┴───── (head load time/2)-1 in milliseconds

         02  clock ticks until motor off
         03  FM or MFM Mode:  Log2 (Bytes per Sector/128)
             FM=Frequency Modulation used on single-density disks
             MFM=Modified Frequency Modulation used on double-sided disks
         04  last sector on track
         05  gap length in bytes:

                    Bytes Per   Sectors     Write    Format
             MFM     Sector    Per Track     Gap       Gap
              1        256         18        0Ah       0Ch
              1        256         16        20h       32h
              2        512          8        2Ah       50h
              2        512          9        1Bh       6Ch
              3       1024          4        80h       F0h
              4       2048          2        C8h       FFh
              5       4096          1        C8h       FFh

         06  disk data length
             80h for 128 bytes/sector
             FFh otherwise
         07  gap length when formatting
         08  data pattern used during formatting
         09  floppy head bounce delay (in milliseconds)
         0A  floppy motor start delay (in 0.125 second intervals)
         0B  floppy motor stop delay (in 0.25 second intervals)

       - see INT 13,18

Esc or Alt-X to exit int 1e Home/PgUp/PgDn/End ←↑↓→