TAO's Notification Service

TAO's Notification Service


Options to Notify_Service


The Notify_Service driver program options are:

Command Description
-Factory factory_name Uses the as the default name for the Channel Factory. The default is "NotifyEventChannelFactory".
-Boot Flag asking that the factory_name be registered in the IOR table. The option is disabled by default. See the "Using the Boot option" section in the README for details.
-NameSvc Registers the Factory and if specified, an Event Channel with the Naming Service. if this option is used, a Naming Service must be accessible. This option is enabled by default.
-NoNameSvc Asks to skip any registration with the Naming Service. This option is disabled by default.
-IORoutput file_name The IOR is output to the file file_name. By default, the IOR is printed out.
-Channel If this option is specified, a EventChannel is created and registered with the Naming Service. This option is disabled by default.
-ChannelName channel_name Specifes the channel_name to register with the Naming Service. The default is "NotifyEventChannel".
-ORBRunThreads threads Specifies the number of threads that will run the ORB::run method.

The Notify_Service driver can be used to load the CosNotification service or it's Real-Time CORBA extension, the RT-Notification.
By using the svc.conf file, the appropriate service is loaded.

To load the CosNotification do:
dynamic TAO_Notify_Service Service_Object * TAO_CosNotification:_make_TAO_CosNotify_Service () ""

or
static TAO_CosNotify_Service ""

To load the RT-Notification Service, do:
dynamic TAO_Notify_Service Service_Object * TAO_RT_Notification:_make_TAO_RT_Notify_Service () ""

If your application links to the RT-Notification library, you can configure the RT-Notification statically via:
static TAO_RT_Notify_Service ""

The service objects also accept the following options to control concurrency in the Notification.
Note that the Notification extensions allow threads to be specified at the EventChannel, Admin and Proxy levels via QoS parameters at run-time.

Option Description
-DispatchingThreads [thread_count] Specifies the number of threads for dispatching.
-SourceThreads [thread_count] Specifies the number of threads for ProxyConsumer filter evaluation.
-ListenerThreads [thread_count] Specifies the number of threads for ProxySupplier filter evaluation.
-AsynchUpdates Send subscription and publication updates asynchronously.
-NoUpdates Do not send any subscription and publication updates.
-AllocateTaskperProxy Allocate threads for the -LookupThreads and -ListenerThreads per proxy
See the README for further explaination.


Feature matrix for the Cos Notification Service


Supported Interfaces

CosNotification::QoSAdmin
CosNotification::AdminPropertiesAdmin
CosNotifyComm::NotifyPublish
CosNotifyComm::NotifySubscribe
CosNotifyComm::PushConsumer
CosNotifyComm::PushSupplier
CosNotifyComm::StructuredPushConsumer
CosNotifyComm::StructuredPushSupplier
CosNotifyComm::SequencePushConsumer
CosNotifyComm::SequencePushSupplier
CosNotifyFilter::Filter
CosNotifyFilter::MappingFilter
CosNotifyFilter::FilterFactory
CosNotifyFilter::FilterAdmin
CosNotifyChannelAdmin::ProxyConsumer
CosNotifyChannelAdmin::ProxySupplier
CosNotifyChannelAdmin::ProxyPushConsumer
CosNotifyChannelAdmin::StructuredProxyPushConsumer
CosNotifyChannelAdmin::SequenceProxyPushConsumer
CosNotifyChannelAdmin::ProxyPushSupplier
CosNotifyChannelAdmin::StructuredProxyPushSupplier
CosNotifyChannelAdmin::SequenceProxyPushSupplier
CosNotifyChannelAdmin::ConumerAdmin
CosNotifyChannelAdmin::SupplierAdmin
CosNotifyChannelAdmin::EventChannel
CosNotifyChannelAdmin::EventChannelFactory

UnSupported Interfaces

CosNotifyComm::PullConsumer
CosNotifyComm::PullSupplier
CosNotifyComm::StructuredPullConsumer
CosNotifyComm::StructuredPullSupplier
CosNotifyComm::SequencePullConsumer
CosNotifyComm::SequencePullSupplier
CosNotifyChannelAdmin::ProxyPullSupplier
CosNotifyChannelAdmin::StructuredProxyPullSupplier
CosNotifyChannelAdmin::SequenceProxyPullSupplier
CosNotifyChannelAdmin::ProxyPullConsumer
CosNotifyChannelAdmin::StructuredProxyPullConsumer
CosNotifyChannelAdmin::SequenceProxyPullConsumer

Interfaces Extensions for RTCORBA support

NotifyExt::EventChannelFactory
NotifyExt::ConsumerAdmin
NotifyExt::SupplierAdmin

Interface : CosNotification::QoSAdmin
Base Interface(s) : none

Method Supported Tested Notes
get_qos Yes No
set_qos Yes Yes, see Ordering Discarding
validate_qos No

QoS Properties support on all interfaces supporting CosNotification::QoSAdmin
Interface : CosNotification::AdminPropertiesAdmin
Base Interface(s) : none

Method Supported Tested Notes
get_admin Yes No
set_admin Yes Yes, see Events


Interface : CosNotifyComm::NotifyPublish
Base Interface(s) : none

Method Supported Tested Notes
offer_change Yes Yes, see Updates


Interface : CosNotifyComm::NotifySubscribe
Base Interface(s) : none

Method Supported Tested Notes
subscription_change Yes see Updates


Interface : CosNotifyComm::PushConsumer
Base Interface(s) : CosNotifyComm::NotifyPublish, CosEventComm::PushConsumer

Method Supported Tested Notes
CosEventComm::PushConsumer::push Yes Yes, see MultiTypes,Simple
CosEventComm::PushConsumer::disconnect_push_consumer Yes Yes, see ConnectDisconnect


Interface : CosNotifyComm::PullConsumer
Not Supported .


Interface : CosNotifyComm::PushSupplier
Base Interface(s) : CosNotifyComm::NotifySubscribe, CosEventComm::PushSupplier

Method Supported Tested Notes
CosEventComm::PushConsumer::disconnect_push_supplier Yes Yes, see ConnectDisconnect


Interface : CosNotifyComm::PullSupplier
Not Supported .


Interface : CosNotifyComm::StructuredPushConsumer
Base Interface(s) CosNotifyComm::NotifyPublish

Method Supported Tested Notes
push_structured_event Yes Yes, see MultiTypes
disconnect_structured_push_consumer Yes Yes, see ConnectDisconnect


Interface : CosNotifyComm::StructuredPullConsumer
Not Supported .


Interface : CosNotifyComm::StructuredPullSupplier
Not Supported .


Interface : CosNotifyComm::StructuredPushSupplier
Base Interface(s) CosNotifyComm::NotifySubscribe

Method Supported Tested Notes
disconnect_structured_push_supplier Yes Yes, see ConnectDisconnect


Interface : CosNotifyComm::SequencePushConsumer
Base Interface(s) CosNotifyComm::NotifyPublish

Method Supported Tested Notes
push_structured_events Yes Yes, see MultiTypes
disconnect_sequence_push_consumer Yes Yes, see ConnectDisconnect


Interface : CosNotifyComm::SequencePullConsumer
Not Supported .


Interface : CosNotifyComm::SequencePullSupplier
Not Supported .


Interface : CosNotifyComm::SequencePushSupplier
Base Interface(s) CosNotifyComm::NotifySubscribe

Method Supported Tested Notes
disconnect_sequence_push_supplier Yes Yes, see ConnectDisconnect


Interface : CosNotifyFilter::Filter
Base Interface(s) none

Method Supported Tested Notes
constraint_grammar Yes No
add_constraints Yes Yes, see Filter
modify_constraints Yes No
get_constraints Yes No
get_all_constraints Yes No
remove_all_constraints Yes No
destroy Yes No
match Yes No
match_structured Yes yes, called internally by Notification during execution of Structured_Filter
match_typed No No
attach_callback No No
detach_callback No No
get_callbacks No No


Interface : CosNotifyFilter::MappingFilter
Not Supported .


Interface : CosNotifyFilter::FilterFactory
Base Interface(s) none

Method Supported Tested Notes
create_filter Yes Yes, see Filter
create_mapping_filter No


Interface : CosNotifyFilter::FilterAdmin
Base Interface(s)

Method Supported Tested Notes
add_filter Yes Yes, see Filter
remove_filter Yes Yes, see Filter
get_filter Yes No
get_all_filters Yes Yes, see Filter
remove_all_filters Yes Yes, see Filter


Interface : CosNotifyChannelAdmin::ProxyConsumer
Base Interface(s) CosNotification::QoSAdmin , CosNotifyFilter::FilterAdmin

Method Supported Tested Notes
MyType Yes No
MyAdmin Yes No
obtain_subscription_types Yes Yes, see Updates Only CosNotifyChannelAdmin::ALL_NOW_UPDATES_ON tested
validate_event_qos No


Interface : CosNotifyChannelAdmin::ProxySupplier
Base Interface(s) CosNotification::QoSAdmin , CosNotifyFilter::FilterAdmin

Method Supported Tested Notes
MyType Yes No
MyAdmin Yes No
priority_filter No
lifetime_filter No
obtain_offered_types Yes Yes, see Updates Only CosNotifyChannelAdmin::ALL_NOW_UPDATES_ON tested
validate_event_qos No


Interface : CosNotifyChannelAdmin::ProxyPushConsumer
Base Interface(s) CosNotification::ProxyConsumer , CosNotifyComm::PushConsumer

Method Supported Tested Notes
connect_any_push_supplier Yes Yes, see MultiTypes,ConnectDisconnect


Interface : CosNotifyChannelAdmin::StructuredProxyPushConsumer
Base Interface(s) CosNotification::ProxyConsumer , CosNotifyComm::StructuredPushConsumer

Method Supported Tested Notes
connect_structured_push_supplier Yes Yes, see MultiTypes,ConnectDisconnect


Interface : CosNotifyChannelAdmin::SequenceProxyPushConsumer
Base Interface(s) CosNotification::ProxyConsumer , CosNotifyComm::SequencePushConsumer

Method Supported Tested Notes
connect_sequence_push_supplier Yes Yes, see MultiTypes,ConnectDisconnect


Interface : CosNotifyChannelAdmin::ProxyPullSupplier
Not Supported .


Interface : CosNotifyChannelAdmin::StructuredProxyPullSupplier
Not Supported .


Interface : CosNotifyChannelAdmin::SequenceProxyPullSupplier
Not Supported .


Interface : CosNotifyChannelAdmin::ProxyPullConsumer
Not Supported .


Interface : CosNotifyChannelAdmin::StructuredProxyPullConsumer
Not Supported .


Interface : CosNotifyChannelAdmin::SequenceProxyPullConsumer
Not Supported .


Interface : CosNotifyChannelAdmin::ProxyPushSupplier
Base Interface(s) CosNotification::ProxySupplier, CosNotifyComm::PushSupplier

Method Supported Tested Notes
connect_any_push_consumer Yes Yes, see MultiTypes,ConnectDisconnect
suspend_connection Yes No
resume_connection Yes No


Interface : CosNotifyChannelAdmin::StructuredProxyPushSupplier
Base Interface(s) CosNotification::ProxySupplier, CosNotifyComm::StructuredPushSupplier

Method Supported Tested Notes
connect_structured_push_consumer Yes Yes, see MultiTypes,ConnectDisconnect
suspend_connection Yes No
resume_connection Yes No


Interface : CosNotifyChannelAdmin::SequenceProxyPushSupplier
Base Interface(s) CosNotification::ProxySupplier , CosNotifyComm::SequencePushSupplier

Method Supported Tested Notes
connect_sequence_push_consumer Yes Yes, see MultiTypes,ConnectDisconnect
suspend_connection Yes No
resume_connection Yes No


Interface : CosNotifyChannelAdmin::ConsumerAdmin
Base Interface(s) CosNotification::QoSAdmin , CosNotifyComm::NotifySubscribe , CosNotifyFilter::FilterAdmin , CosEventChannelAdmin::ConsumerAdmin

Method Supported Tested Notes
CosEventChannelAdmin::ConsumerAdmin::obtain_push_supplier Yes No
CosEventChannelAdmin::ConsumerAdmin::obtain_pull_supplier No
MyID Yes No
MyChannel Yes No
MyOperator Yes No
priority_filter No
lifetime_filter No
pull_suppliers No
push_suppliers Yes No
get_proxy_supplier Yes Yes, see Updates
obtain_notification_pull_supplier No
obtain_notification_push_supplier Yes Yes, see MultiTypes, ConnectDisconnect
destroy Yes Yes, see LifeCycle, IdAssignment


Interface : CosNotifyChannelAdmin::SupplierAdmin
Base Interface(s) CosNotification::QoSAdmin , CosNotifyComm::NotifyPublish , CosNotifyFilter::FilterAdmin , CosEventChannelAdmin::SupplierAdmin

Method Supported Tested Notes
CosEventChannelAdmin::SupplierAdmin::obtain_push_consumer Yes No
CosEventChannelAdmin::SupplierAdmin::obtain_pull_consumer No
MyID Yes No
MyChannel Yes No
MyOperator Yes No
pull_consumers No
push_consumers Yes No
get_proxy_consumer Yes Yes, see Updates
obtain_notification_pull_supplier No
obtain_notification_push_consumer Yes Yes, see MultiTypes, ConnectDisconnect
destroy Yes Yes, see LifeCycle, IdAssignment


Interface : CosNotifyChannelAdmin::EventChannel
Base Interface(s) CosNotification::QoSAdmin , CosNotification::AdminPropertiesAdmin , CosEventChannelAdmin::EventChannel

Method Supported Tested Notes
CosEventChannelAdmin::EventChannel::for_consumers Yes No
CosEventChannelAdmin::EventChannel::for_suppliers Yes No
CosEventChannelAdmin::EventChannel::destroy Yes yes, see Events, Filter
MyFactory Yes No
default_consumer_admin Yes Yes, see Events
default_supplier_admin Yes Yes, see Events
default_filter_factory Yes Yes, see Filter
new_for_consumers Yes Yes, see Simple,Events
new_for_suppliers Yes Yes, see Simple,Events
get_consumeradmin Yes Yes, see IdAssignment
get_supplieradmin Yes Yes, see IdAssignment
get_all_consumeradmins Yes No
get_all_supplieradmins Yes No

AdminProperties supported at the EventChannel are:
  • MaxQueueLength, MaxConsumers, MaxSuppliers, RejectNewEvents
see AdminProperties
Interface : CosNotifyChannelAdmin::EventChannelFactory
Base Interface(s) : none

Method Supported Tested Notes
create_channel Yes Yes, see Events,Simple
get_all_channels Yes No
get_event_channel Yes Yes, see IdAssignment


Interface : NotifyExt::EventChannelFactory
Base Interface(s) : CosNotifyChannelAdmin::EventChannelFactory

Method Supported Tested Notes
destroy Yes Yes, see Destroy


Interface : NotifyExt::ConsumerAdmin
Base Interface(s) : CosNotifyChannelAdmin::ConsumerAdmin

Method Supported Tested Notes
obtain_notification_push_supplier_with_qos Yes Yes, see Lanes


Interface : NotifyExt::SupplierAdmin
Base Interface(s) : CosNotifyChannelAdmin::SupplierAdmin

Method Supported Tested Notes
obtain_notification_push_consumer_with_qos Yes Yes, see Lanes

The additional QoS properties supported are:
  • ThreadPoolParams
  • ThreadPoolLanesParams
see the NotifyExt.idl file for the QoS definitions.


Scripting Options for Notification Service Testing framework


The Notification Service Testing framework uses the Service Configurator to load various command objects.
The Command_Builder object is used to load the target objects.
To test the various Notification features we then write scripts to rapidly reproduce test cases.
The Notify_Test_Driver program reads a svc.conf file and executes the commands specified.
The following options can specified to the Driver program:

Command Description
-Timeout timeout_period_in_seconds Specify the timeout period for this test
-IORoutput output_file_name Output the IOR of the Activation Manager .
This is used by a client to signal its peer.
-IORinput file://input_file_name Input the IOR of the peer's Activation Manager .
This is used to signal the peer.
-Skip_Priority_Levels_Check Skip the check for multiple priority levels.

See the *.conf files in Lanes and ThreadPool for examples of the test framework in use.

The options that can be specified to each target object are as follows:

Target Object : EventChannel

Loading Syntax: dynamic TAO_Notify_EventChannel_Command_Factory Service_Object *TAO_NotifyTests:_make_TAO_Notify_EventChannel_Command_Factory () ""

Command Parameters Description
-Create Name_of_channel
Name_of_EventChannelFactory
[COLLOCATED]
Create an Event Channel

Example : static Command_Builder "EventChannel -Create ec1 NotifyEventChannelFactory"

Command Parameters Description
-Destroy Name_of_channel Destroy an Event Channel

Example : static Command_Builder "EventChannel -Destroy ec1"

Command Parameters Description
-Set_QoS Name_of_channel [QoS_Options] Set QoS parameters on an event channel

QoS_Options = -ThreadPool [-Threads thread_pool_size (default= 1) ] [-Priority default_priority (default=ACE_DEFAULT_THREAD_PRIORITY)] | -Lanes lane_count [-Lane priority static_threads dynamic_threads]*

Example : : static Command_Builder "EventChannel -Set_QoS -ThreadPool Threads 2 -Priority 2"
Example : : static Command_Builder "EventChannel -Set_QoS -Lanes 2 -Lane 10 1 0 -Lane 30 2 1"


Target Object : ConsumerAdmin

Loading Syntax: dynamic TAO_Notify_ConsumerAdmin_Command_Factory Service_Object *TAO_NotifyTests:_make_TAO_Notify_ConsumerAdmin_Command_Factory () ""

Command Parameters Description
-Create Name_of_Admin
Name_of_EventChannel
[-AND_OP | OR_OP (default = CosNotifyChannelAdmin::OR_OP)]
Create a ConsumerAdmin

Example : : static Command_Builder "ConsumerAdmin -Create ca1 ec1 -AND_OP"

Command Parameters Description
-Subscription Name_of_Admin
+added_type1 +added_type2 ... -removed_type3 -removed_type4 ...
Send subscription updates to the ConsumerAdmin. Note that domain name is set to "*".

Example : : static Command_Builder "ConsumerAdmin -Subscription ca1 +Red +Green -Blue"

Command Parameters Description
-Set_QoS Name_of_Admin [QoS_Options] Set QoS options for ConsumerAdmin

QoS_Options = -ThreadPool [-Threads thread_pool_size (default= 1) ] [-Priority default_priority (default=ACE_DEFAULT_THREAD_PRIORITY)] | -Lanes lane_count [-Lane priority static_threads dynamic_threads]*

Example : : static Command_Builder "ConsumerAdmin -Set_Qos -ThreadPool Threads 2 -Priority 2"
Example : : static Command_Builder "ConsumerAdmin -Set_Qos -Lanes 2 -Lane 10 1 0 -Lane 30 2 1"


Target Object : SupplierAdmin

Loading Syntax: dynamic TAO_Notify_SupplierAdmin_Command_Factory Service_Object *TAO_NotifyTests:_make_TAO_Notify_SupplierAdmin_Command_Factory () ""

Command Parameters Description
-Create Name_of_Admin
Name_of_EventChannel
[-AND_OP | OR_OP (default = CosNotifyChannelAdmin::OR_OP)]
Create a SupplierAdmin

Example : : static Command_Builder "SupplierAdmin -Create sa1 ec1 -AND_OP"

Command Parameters Description
-Offer Name_of_Admin
+added_type1 +added_type2 ... -removed_type3 -removed_type4 ...
Send offer updates to the SupplierAdmin. Note that domain name is set to "*".

Example : : static Command_Builder "SupplierAdmin -Offer ca1 +Red +Green -Blue"

Command Parameters Description
-Set_QoS Name_of_Admin [QoS_Options] Set QoS options for SupplierAdmin

QoS_Options = -ThreadPool [-Threads thread_pool_size (default= 1) ] [-Priority default_priority (default=ACE_DEFAULT_THREAD_PRIORITY)] | -Lanes lane_count [-Lane priority static_threads dynamic_threads]*

Example : : static Command_Builder "SupplierAdmin -Set_Qos -ThreadPool Threads 2 -Priority 2"
Example : : static Command_Builder "SupplierAdmin -Set_Qos -Lanes 2 -Lane 10 1 0 -Lane 30 2 1"


Target Object : PeriodicConsumer

Loading Syntax: dynamic TAO_Notify_Periodic_Consumer_Command_Factory Service_Object* TAO_NotifyTests:_make_TAO_Notify_Periodic_Consumer_Command_Factory () ""

Command Parameters Description
-Create Name_of_Consumer
[-Relay relay_destination]
[-Direct]
[-Admin Name_of_ConsumerAdmin]
[-POA name_of_POA (default = RootPOA)]
[-Proxy proxy_name]
[-Set_QoS [Qos_Options]]
[-MaxCount expected_number_of_events]
[-Check_Priority]
Create a PeriodicConsumer. The consumer is activated in the POA specified.

Example : : static Command_Builder "PeriodicConsumer -Create c1 ca1 -POA myPOA -Proxy ca1_proxy -MaxCount 10"

Command Parameters Description
-Subscription Name_of_Consumer
+added_type1 +added_type2 ... -removed_type3 -removed_type4 ...
static Command_Builder "PeriodicConsumer -Subscription ca1 +Red +Green -Blue"

Example : : Send subscription updates to its proxy. Note that domain name is set to "*".

Command Parameters Description
-Disconnect Name_of_Consumer Disconnect the Consumer from the EventChannel.

Example : : static Command_Builder -PeriodicConsumer "Disconnect ca1"

Command Parameters Description
-Deactivate Name_of_Consumer Deactivate the Consumer from its POA

Example : : static Command_Builder "-PeriodicConsumer -Deactivate ca1"

Command Parameters Description
-Status Name_of_Consumer Print the status of the consumer. Checks if the proxy is alive.

Example : : static Command_Builder "-PeriodicConsumer -Status ca1"

Command Parameters Description
-Set_QoS Name_of_consumer [QoS_Options] Set QoS parameters on a Periodic Consumer. The actual QoS settings are applied to the corresponding ProxySupplier.

QoS_Options = -ThreadPool [-Threads thread_pool_size (default= 1) ] [-Priority default_priority (default=ACE_DEFAULT_THREAD_PRIORITY)] | -Laness lane_count [-Lane priority static_threads dynamic_threads]*

Example : : static Command_Builder "PeriodicConsumer -Set_QoS -ThreadPool Threads 2 -Priority 2"
Example : : static Command_Builder "PeriodicConsumer -Set_QoS -Lanes 2 -Lane 10 1 0 -Lane 30 2 1"


Target Object : PeriodicSupplier

Loading Syntax: dynamic TAO_Notify_Periodic_Supplier_Command_Factory Service_Object* TAO_NotifyTests:_make_TAO_Notify_Periodic_Supplier_Command_Factory () ""

Command Parameters Description
-Create Name_of_Supplier
[-Direct direct_target]
[-Admin Name_of_ConsumerAdmin]
[-POA name_of_POA (default = RootPOA)]
[-Proxy proxy_name]
[-Set_QoS [Qos_Options]]
-EventType type_of_event
-FilterLongData name long_filterable_data
-Priority supplier_thread_priority
-Period sending_period (in microseconds)
-ExecTime estimated_time_per_send_operation
-Phase supplier_thread_starting_phase
-Iter number_of_events-to_send
-Load hint_to_consumer
-RunTime time_to_run_in_sec
Create a PeriodicSupplier. The supplier is activated in the POA specified.
The -Create command spawns a thread that sends periodic events.

Example : : static Command_Builder "PeriodicSupplier -Create s1 sa1_ec1 -Proxy s1_proxy -EventType RED -FilterLongData Temp 3 -Priority 0 -Period 10000 -ExecTime 10000 -Phase 0 -Iter 1 -Load 1 "

Command Parameters Description
-Offer Name_of_Supplier
+added_type1 +added_type2 ... -removed_type3 -removed_type4 ...
static Command_Builder "PeriodicSupplier -Offer sa1 +Red +Green -Blue"

Example : : Send offer updates to its proxy. Note that domain name is set to "*".

Command Parameters Description
-Disconnect Name_of_Supplier Disconnect the Supplier from the EventChannel.

Example : : static Command_Builder -PeriodicSupplier "Disconnect sa1"

Command Parameters Description
-Deactivate Name_of_Supplier Deactivate the Supplier from its POA

Example : : static Command_Builder "-PeriodicSupplier -Deactivate ca1"

Command Parameters Description
Status Name_of_Supplier Print the status of the consumer. Checks if the proxy is alive.

Example : : static Command_Builder "-PeriodicSupplier -Status sa1"

Command Parameters Description
-Set_QoS Name_of_Supplier [QoS_Options] Set QoS parameters on a Periodic Supplier. The actual QoS settings are applied to the corresponding ProxyConsumer.

QoS_Options = -ThreadPool [-Threads thread_pool_size (default= 1) ] [-Priority default_priority (default=ACE_DEFAULT_THREAD_PRIORITY)] | -Laness lane_count [-Lane priority static_threads dynamic_threads]*

Example : : static Command_Builder "PeriodicSupplier -Set_QoS -ThreadPool Threads 2 -Priority 2"
Example : : static Command_Builder "PeriodicSupplier -Set_QoS -Lanes 2 -Lane 10 1 0 -Lane 30 2 1"


Target Object : Filter

Loading Syntax: dynamic TAO_Notify_Filter_Command_Factory Service_Object* TAO_NotifyTests:_make_TAO_Notify_Filter_Command_Factory () ""

Command Parameters Description
-CreateFactory Filter_Factory_Name
Event_Channel_Name
Obtain the default FilterFactory from the EventChannel.

Example : : static Command_Builder "Filter -CreateFactory ff ec1"

Command Parameters Description
-CreateFilter Filter_Name
Filter_Factory_Name
Create a Filter

Example : : static Command_Builder "Filter -CreateFilter f1 ff"

Command Parameters Description
-Add_Constraint Filter_Name
Constraint_Expression
Add a constraint to a filter.

Example : : static Command_Builder "Filter -Add_Constraint f1 'Temp > 2'"

Command Parameters Description
-AddFilter Filter_Name
FilterAdmin_Name
Add a filter to an Admin. The FilterAdmin can be the name of any Admin or Proxy objects.

Example : : static Command_Builder "Filter -Add_Filter f1 sa1_ec1"

Command Parameters Description
-Destroy Filter_Name
Destroy the Filter.

Example : : static Command_Builder "Filter �Destroy ff "


Target Object : Application

Loading Syntax for RTCORBA Application:
dynamic TAO_Notify_RT_Application_Command_Factory Service_Object * TAO_RT_NotifyTests:_make_TAO_Notify_RT_Application_Command_Factory () ""
Loading Syntax for non-RTCORBA Application:
dynamic TAO_Notify_Application_Command_Factory Service_Object * TAO_NotifyTests:_make_TAO_Notify_Application_Command_Factory () ""

Command Parameters Description
-Init
Init the Application

Example : : static Command_Builder "Application -Init"

Command Parameters Description
-Run
Run all the suppliers and consumers.

Example : : static Command_Builder "Application -Run"

Command Parameters Description
-WaitForEvents
Wait till all the suppliers have send all there events and all the consumers have received the expected count of events.

Example : : static Command_Builder "Application �Wait_For_Events"

Command Parameters Description
-Shutdown
Shutdown the ORB.

Example : : static Command_Builder "Application �Shutdown"

Command Parameters Description
-DumpStats [-Samples]
Dump performance statistics.
if the -Samples option is specified all the latency samples are generated.
Data files are created in the current directory with the following names:
Supplier_{supplier_name}.dat
Consumer_{consumer_name}.dat

Example : : static Command_Builder "Application �DumpStats"

Command Parameters Description
-SignalPeer
Signal another waiting instance of the test.

Example : static Command_Builder "Application �SignalPeer":


Command Parameters Description
-WaitToStart
Wait for another instance to signal.

Example :static Command_Builder "Application �WaitToStart"



Target Object : POA

Loading Syntax for RTCORBA Application:
dynamic TAO_Notify_RT_POA_Command_Factory Service_Object* TAO_RT_NotifyTests:_make_TAO_Notify_RT_POA_Command_Factory () ""

Command Parameters Description
-Create POA_Name
-PriorityModel {CLIENT|SERVER} default_priority (defaults : CLIENT_PROPAGATED, Priority = 0)
-Lanes lane_count [-Lane priority static_threads dynamic_threads>]*
-Bands band_count [-Band low_priority high_priority]*
-ThreadPool static_threads priority
Create an RT POA with the specified name and options of

Example : : static Command_Builder "POA -Create poa_test -PriorityModel CLIENT 1 -Lanes 1 -Lane -15 1 0"

Command Parameters Description
-Destroy POA_Name
Destroy a POA

Example : : static Command_Builder "POA �Destroy�