Apache 2.0手册中文版翻译项目

项目说明 | 项目进度 | 项目讨论区 | Apache手册中文版

 


Using Apache With Novell NetWare - Apache HTTP服务器
<-
Apache主站 > HTTP服务器 > 文档 > 2.0版本 > Platform Specific Notes

Using Apache With Novell NetWare


现有的语种:  en 

This document explains how to install, configure and run Apache 2.0 under Novell NetWare 5.1 and above. If you find any bugs, or wish to contribute in other ways, please use our bug reporting page.

The bug reporting page and dev-httpd mailing list are not provided to answer questions about configuration or running Apache. Before you submit a bug report or request, first consult this document, the Frequently Asked Questions page and the other relevant documentation topics. If you still have a question or problem, post it to the novell.devsup.webserver newsgroup, where many Apache users are more than willing to answer new and obscure questions about using Apache on NetWare.

Most of this document assumes that you are installing Apache from a binary distribution. If you want to compile Apache yourself (possibly to help with development, or to track down bugs), see the section on Compiling Apache for NetWare below.

top

Requirements

Apache 2.0 is designed to run on NetWare 5.1 and above.

If running on NetWare 5.1 you must install Service Pack 4 or above.

If running on NetWare 6 you must install Service Pack 1 or above.

NetWare service packs are available here.

top

Downloading Apache for NetWare

Information on the latest version of Apache can be found on the Apache web server at http://www.apache.org/. This will list the current release, any more recent alpha or beta-test releases, together with details of mirror web and anonymous ftp sites.

top

Installing Apache for NetWare

There is no Apache install program for NetWare currently. You will need to compile apache and copy the files over to the server manually. An install program will be posted at a later date.

Follow these steps to install Apache on NetWare from the binary download (assuming you will install to sys:/apache2):

Follow these steps to install Apache on NetWare manually from your own build source (assuming you will install to sys:/apache):

Apache may be installed to other volumes besides the default SYS volume.

top

Running Apache for NetWare

To start Apache just type apache at the console. This will load apache in the OS address space. If you prefer to load Apache in a protected address space you may specify the address space with the load statement as follows:

load address space = apache2 apache2

This will load Apache into an address space called apache. Running multiple instances of Apache concurrently on NetWare is possible by loading each instance into its own protected address space.

After starting Apache, it will be listening to port 80 (unless you changed the Listen directive in the configuration files). To connect to the server and access the default page, launch a browser and enter the server's name or address. This should respond with a welcome page, and a link to the Apache manual. If nothing happens or you get an error, look in the error_log file in the logs directory.

Once your basic installation is working, you should configure it properly by editing the files in the conf directory.

To unload Apache running in the OS address space just type the following at the console:

unload apache2

or

apache2 shutdown

If apache is running in a protected address space specify the address space in the unload statement:

unload address space = apache2 apache2

When working with Apache it is important to know how it will find the configuration files. You can specify a configuration file on the command line in two ways:

apache2 -f "vol:/my server/conf/my.conf"

apache -f test/test.conf

In these cases, the proper ServerRoot should be set in the configuration file.

If you don't specify a configuration file name with -f, Apache will use the file name compiled into the server, usually conf/httpd.conf. Invoking Apache with the -V switch will display this value labeled as SERVER_CONFIG_FILE. Apache will then determine its ServerRoot by trying the following, in this order:

The server root compiled into the server is usually sys:/apache2. invoking apache with the -V switch will display this value labeled as HTTPD_ROOT.

Apache 2.0 for NetWare includes a set of command line directives that can be used to modify or display information about the running instance of the web server. Each of these directives must be preceded by the keyword APACHE2:

RESTART
Instructs Apache to terminate all running worker threads as they become idle, reread the configuration file and restart each worker thread based on the new configuration.
VERSION
Displays version information about the currently running instance of Apache.
MODULES
Displays a list of loaded modules both built-in and external.
DIRECTIVES
Displays a list of all available directives.
SETTINGS
Enables or disables the thread status display on the console. When enabled, a status of the number of running threads is displayed along with their status.
SHUTDOWN
Terminates the running instance of the Apache web server.
top

Configuring Apache for NetWare

Apache is configured by files in the conf directory. These are the same as files used to configure the Unix version, but there are a few different directives for Apache on NetWare. See the Apache documentation for all the available directives.

The main differences in Apache for NetWare are:

Additional NetWare specific directives:

top

Compiling Apache for NetWare

Compiling Apache requires MetroWerks CodeWarrior 6.x or higher to be properly installed. Once Apache has been built, it needs to be installed on a NetWare volume's root directory. The default is the sys:/Apache2 directory.

Before running the server you must fill out the conf directory. Copy the file HTTPD-STD.CONF from the distribution conf directory and rename it to HTTPD.CONF. Edit the HTTPD.CONF file searching for all @@Value@@ markers and replacing them with the appropriate setting. Copy over the conf/magic and conf/mime.types files as well.

Requirements:

The following development tools are required to build Apache 2.0 for NetWare:

Building Apache using the Metrowerks Project Files:

All major pieces of Apache and APR are built using the ApacheNW.mcp and LibAprNW.mcp project files. This includes modules such as status, info, proxy, etc.

Building Apache using the NetWare makefiles:

Additional make options

现有的语种:  en 

 


项目维护者: kajaa

项目说明 | 项目进度 | 项目讨论区 | Apache手册中文版