.. _clustered_deployment_ssl: Clustered Deployment Using SSL ------------------------------- In this section, we provide a tutorial for running a secure three-node Kafka cluster and ZooKeeper ensemble with SSL. By the end of this tutorial, you will have successfully installed and run a simple deployment with SSL security enabled on Docker. If you're looking for a simpler tutorial, please `refer to our quick start guide <../quickstart.html>`_, which is limited to a single node Kafka cluster. .. note:: It is worth noting that we will be configuring Kafka and ZooKeeper to store data locally in the Docker containers. For production deployments (or generally whenever you care about not losing data), you should use mounted volumes for persisting data in the event that a container stops running or is restarted. This is important when running a system like Kafka on Docker, as it relies heavily on the filesystem for storing and caching messages. Refer to our `documentation on Docker external volumes `_ for an example of how to add mounted volumes to the host machine. Installing & Running Docker ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For this tutorial, we'll run Docker using the Docker client. If you are interested in information on using Docker Compose to run the images, :ref:`skip to the bottom of this guide `. To get started, you'll need to first `install Docker and get it running `_. The Confluent Platform Docker Images require Docker version 1.11 or greater. Docker Client: Setting Up a Three Node Kafka Cluster ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you're running on Windows or Mac OS X, you'll need to use `Docker Machine `_ to start the Docker host. Docker runs natively on Linux, so the Docker host will be your local machine if you go that route. If you are running on Mac or Windows, be sure to allocate at least 4 GB of ram to the Docker Machine. Now that we have all of the Docker dependencies installed, we can create a Docker machine and begin starting up Confluent Platform. .. note:: In the following steps we'll be running each Docker container in detached mode. However, we'll also demonstrate how access the logs for a running container. If you prefer to run the containers in the foreground, you can do so by replacing the ``-d`` flags with ``--it``. 1. Create and configure the Docker machine. .. sourcecode:: bash docker-machine create --driver virtualbox --virtualbox-memory 6000 confluent Next, configure your terminal window to attach it to your new Docker Machine: .. sourcecode:: bash eval $(docker-machine env confluent) 2. Clone the git repository: .. sourcecode:: bash git clone https://github.com/confluentinc/cp-docker-images cd cp-docker-images 3. Generate Credentials You will need to generate CA certificates (or use yours if you already have one) and then generate a keystore and truststore for brokers and clients. You can use the ``create-certs.sh`` script in ``examples/kafka-cluster-ssl/secrets`` to generate them. For production, please use these scripts for generating certificates : https://github.com/confluentinc/confluent-platform-security-tools For this example, we will use the ``create-certs.sh`` available in the ``examples/kafka-cluster-ssl/secrets`` directory in the cp-docker-images repo. See "security" section for more details on security. Make sure that you have OpenSSL and JDK installed. .. sourcecode:: bash cd $(pwd)/examples/kafka-cluster-ssl/secrets ./create-certs.sh (Type yes for all "Trust this certificate? [no]:" prompts.) cd - Set the environment variable for secrets directory. We will use this later in our commands. Make sure you are in the ``cp-confluent-images`` directory. .. sourcecode:: bash export KAFKA_SSL_SECRETS_DIR=$(pwd)/examples/kafka-cluster-ssl/secrets 4. Start Up a 3-node ZooKeeper Ensemble by running the three commands below. .. sourcecode:: bash docker run -d \ --net=host \ --name=zk-1 \ -e ZOOKEEPER_SERVER_ID=1 \ -e ZOOKEEPER_CLIENT_PORT=22181 \ -e ZOOKEEPER_TICK_TIME=2000 \ -e ZOOKEEPER_INIT_LIMIT=5 \ -e ZOOKEEPER_SYNC_LIMIT=2 \ -e ZOOKEEPER_SERVERS="localhost:22888:23888;localhost:32888:33888;localhost:42888:43888" \ confluentinc/cp-zookeeper:4.0.0 .. sourcecode:: bash docker run -d \ --net=host \ --name=zk-2 \ -e ZOOKEEPER_SERVER_ID=2 \ -e ZOOKEEPER_CLIENT_PORT=32181 \ -e ZOOKEEPER_TICK_TIME=2000 \ -e ZOOKEEPER_INIT_LIMIT=5 \ -e ZOOKEEPER_SYNC_LIMIT=2 \ -e ZOOKEEPER_SERVERS="localhost:22888:23888;localhost:32888:33888;localhost:42888:43888" \ confluentinc/cp-zookeeper:4.0.0 .. sourcecode:: bash docker run -d \ --net=host \ --name=zk-3 \ -e ZOOKEEPER_SERVER_ID=3 \ -e ZOOKEEPER_CLIENT_PORT=42181 \ -e ZOOKEEPER_TICK_TIME=2000 \ -e ZOOKEEPER_INIT_LIMIT=5 \ -e ZOOKEEPER_SYNC_LIMIT=2 \ -e ZOOKEEPER_SERVERS="localhost:22888:23888;localhost:32888:33888;localhost:42888:43888" \ confluentinc/cp-zookeeper:4.0.0 Check the logs to confirm that the ZooKeeper servers have booted up successfully: .. sourcecode:: bash docker logs zk-1 You should see messages like this at the end of the log output: .. sourcecode:: bash [2016-07-24 07:17:50,960] INFO Created server with tickTime 2000 minSessionTimeout 4000 maxSessionTimeout 40000 datadir /var/lib/zookeeper/log/version-2 snapdir /var/lib/zookeeper/data/version-2 (org.apache.zookeeper.server.ZooKeeperServer) [2016-07-24 07:17:50,961] INFO FOLLOWING - LEADER ELECTION TOOK - 21823 (org.apache.zookeeper.server.quorum.Learner) [2016-07-24 07:17:50,983] INFO Getting a diff from the leader 0x0 (org.apache.zookeeper.server.quorum.Learner) [2016-07-24 07:17:50,986] INFO Snapshotting: 0x0 to /var/lib/zookeeper/data/version-2/snapshot.0 (org.apache.zookeeper.server.persistence.FileTxnSnapLog) [2016-07-24 07:17:52,803] INFO Received connection request /127.0.0.1:50056 (org.apache.zookeeper.server.quorum.QuorumCnxManager) [2016-07-24 07:17:52,806] INFO Notification: 1 (message format version), 3 (n.leader), 0x0 (n.zxid), 0x1 (n.round), LOOKING (n.state), 3 (n.sid), 0x0 (n.peerEpoch) FOLLOWING (my state) (org.apache.zookeeper.server.quorum.FastLeaderElection) You can repeat the command for the two other ZooKeeper nodes. Next, you should verify that ZK ensemble is ready: .. sourcecode:: bash for i in 22181 32181 42181; do docker run --net=host --rm confluentinc/cp-zookeeper:4.0.0 bash -c "echo stat | nc localhost $i | grep Mode" done You should see one ``leader`` and two ``follower`` instances. .. sourcecode:: bash Mode: follower Mode: leader Mode: follower 4. Now that ZooKeeper is up and running, we can fire up a three node Kafka cluster. .. sourcecode:: bash docker run -d \ --net=host \ --name=kafka-ssl-1 \ -e KAFKA_ZOOKEEPER_CONNECT=localhost:22181,localhost:32181,localhost:42181 \ -e KAFKA_ADVERTISED_LISTENERS=SSL://localhost:29092 \ -e KAFKA_SSL_KEYSTORE_FILENAME=kafka.broker1.keystore.jks \ -e KAFKA_SSL_KEYSTORE_CREDENTIALS=broker1_keystore_creds \ -e KAFKA_SSL_KEY_CREDENTIALS=broker1_sslkey_creds \ -e KAFKA_SSL_TRUSTSTORE_FILENAME=kafka.broker1.truststore.jks \ -e KAFKA_SSL_TRUSTSTORE_CREDENTIALS=broker1_truststore_creds \ -e KAFKA_SECURITY_INTER_BROKER_PROTOCOL=SSL \ -v ${KAFKA_SSL_SECRETS_DIR}:/etc/kafka/secrets \ confluentinc/cp-kafka:4.0.0 .. sourcecode:: bash docker run -d \ --net=host \ --name=kafka-ssl-2 \ -e KAFKA_ZOOKEEPER_CONNECT=localhost:22181,localhost:32181,localhost:42181 \ -e KAFKA_ADVERTISED_LISTENERS=SSL://localhost:39092 \ -e KAFKA_SSL_KEYSTORE_FILENAME=kafka.broker2.keystore.jks \ -e KAFKA_SSL_KEYSTORE_CREDENTIALS=broker2_keystore_creds \ -e KAFKA_SSL_KEY_CREDENTIALS=broker2_sslkey_creds \ -e KAFKA_SSL_TRUSTSTORE_FILENAME=kafka.broker2.truststore.jks \ -e KAFKA_SSL_TRUSTSTORE_CREDENTIALS=broker2_truststore_creds \ -e KAFKA_SECURITY_INTER_BROKER_PROTOCOL=SSL \ -v ${KAFKA_SSL_SECRETS_DIR}:/etc/kafka/secrets \ confluentinc/cp-kafka:4.0.0 .. sourcecode:: bash docker run -d \ --net=host \ --name=kafka-ssl-3 \ -e KAFKA_ZOOKEEPER_CONNECT=localhost:22181,localhost:32181,localhost:42181 \ -e KAFKA_ADVERTISED_LISTENERS=SSL://localhost:49092 \ -e KAFKA_SSL_KEYSTORE_FILENAME=kafka.broker3.keystore.jks \ -e KAFKA_SSL_KEYSTORE_CREDENTIALS=broker3_keystore_creds \ -e KAFKA_SSL_KEY_CREDENTIALS=broker3_sslkey_creds \ -e KAFKA_SSL_TRUSTSTORE_FILENAME=kafka.broker3.truststore.jks \ -e KAFKA_SSL_TRUSTSTORE_CREDENTIALS=broker3_truststore_creds \ -e KAFKA_SECURITY_INTER_BROKER_PROTOCOL=SSL \ -v ${KAFKA_SSL_SECRETS_DIR}:/etc/kafka/secrets \ confluentinc/cp-kafka:4.0.0 Check the logs to see the broker has booted up successfully: .. sourcecode:: bash docker logs kafka-ssl-1 docker logs kafka-ssl-2 docker logs kafka-ssl-3 You should see start see bootup messages. For example, ``docker logs kafka-ssl-3 | grep started`` should show the following: .. sourcecode:: bash [2016-07-24 07:29:20,258] INFO [Kafka Server 1003], started (kafka.server.KafkaServer) [2016-07-24 07:29:20,258] INFO [Kafka Server 1003], started (kafka.server.KafkaServer) You should see the messages like the following on the broker acting as controller. .. sourcecode:: bash [2016-07-24 07:29:20,283] TRACE Controller 1001 epoch 1 received response {error_code=0} for a request sent to broker localhost:29092 (id: 1001 rack: null) (state.change.logger) [2016-07-24 07:29:20,283] TRACE Controller 1001 epoch 1 received response {error_code=0} for a request sent to broker localhost:29092 (id: 1001 rack: null) (state.change.logger) [2016-07-24 07:29:20,286] INFO [Controller-1001-to-broker-1003-send-thread], Starting (kafka.controller.RequestSendThread) [2016-07-24 07:29:20,286] INFO [Controller-1001-to-broker-1003-send-thread], Starting (kafka.controller.RequestSendThread) [2016-07-24 07:29:20,286] INFO [Controller-1001-to-broker-1003-send-thread], Starting (kafka.controller.RequestSendThread) [2016-07-24 07:29:20,287] INFO [Controller-1001-to-broker-1003-send-thread], Controller 1001 connected to localhost:49092 (id: 1003 rack: null) for sending state change requests (kafka.controller.RequestSendThread) 5. Test that the broker is working as expected. Now that the brokers are up, we'll test that they're working as expected by creating a topic. .. sourcecode:: bash docker run \ --net=host \ --rm \ confluentinc/cp-kafka:4.0.0 \ kafka-topics --create --topic bar --partitions 3 --replication-factor 3 --if-not-exists --zookeeper localhost:32181 You should see the following output: .. sourcecode:: bash Created topic "bar". Now verify that the topic is created successfully by describing the topic. .. sourcecode:: bash docker run \ --net=host \ --rm \ confluentinc/cp-kafka:4.0.0 \ kafka-topics --describe --topic bar --zookeeper localhost:32181 You should see the following message in your terminal window: .. sourcecode:: bash Topic:bar PartitionCount:3 ReplicationFactor:3 Configs: Topic: bar Partition: 0 Leader: 1003 Replicas: 1003,1002,1001 Isr: 1003,1002,1001 Topic: bar Partition: 1 Leader: 1001 Replicas: 1001,1003,1002 Isr: 1001,1003,1002 Topic: bar Partition: 2 Leader: 1002 Replicas: 1002,1001,1003 Isr: 1002,1001,1003 Next, we'll try generating some data to the ``bar`` topic we just created. .. sourcecode:: bash docker run \ --net=host \ --rm \ -v ${KAFKA_SSL_SECRETS_DIR}:/etc/kafka/secrets \ confluentinc/cp-kafka:4.0.0 \ bash -c "seq 42 | kafka-console-producer --broker-list localhost:29092 --topic bar -producer.config /etc/kafka/secrets/host.producer.ssl.config && echo 'Produced 42 messages.'" The command above will pass 42 integers using the Console Producer that is shipped with Kafka. As a result, you should see something like this in your terminal: .. sourcecode:: bash Produced 42 messages. It looked like things were successfully written, but let's try reading the messages back using the Console Consumer and make sure they're all accounted for. .. sourcecode:: bash docker run \ --net=host \ --rm \ -v ${KAFKA_SSL_SECRETS_DIR}:/etc/kafka/secrets \ confluentinc/cp-kafka:4.0.0 \ kafka-console-consumer --bootstrap-server localhost:29092 --topic bar --new-consumer --from-beginning --consumer.config /etc/kafka/secrets/host.consumer.ssl.config --max-messages 42 You should see the following (it might take some time for this command to return data. Kafka has to create the ``__consumers_offset`` topic behind the scenes when you consume data for the first time and this may take some time): .. sourcecode:: bash 1 4 7 10 13 16 .... 41 Processed a total of 42 messages .. _clustered_quickstart_compose_ssl: Docker Compose: Setting Up a Three Node Confluent Platform Cluster with SSL ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Before you get started, you will first need to install `Docker `_ and `Docker Compose `_. Once you've done that, you can follow the steps below to start up the Confluent Platform services. 1. Clone the Confluent Platform Docker Images Github Repository. .. sourcecode:: bash git clone https://github.com/confluentinc/cp-docker-images cd cp-docker-images/examples/kafka-cluster-ssl Follow section 3 on generating SSL credentials in the ???Docker Client??? section above to create the SSL credentials. 2. Start ZooKeeper and Kafka using Docker Compose ``up`` command. .. sourcecode:: bash export KAFKA_SSL_SECRETS_DIR=$(pwd)/secrets docker-compose create docker-compose start In another terminal window, go to the same directory (kafka-cluster). Make sure the services are up and running .. sourcecode:: bash docker-compose ps You should see the following: .. sourcecode:: bash Name Command State Ports ------------------------------------------------------------------------- kafkaclusterssl_kafka-ssl-1_1 /etc/confluent/docker/run Up kafkaclusterssl_kafka-ssl-2_1 /etc/confluent/docker/run Up kafkaclusterssl_kafka-ssl-3_1 /etc/confluent/docker/run Up kafkaclusterssl_zookeeper-1_1 /etc/confluent/docker/run Up kafkaclusterssl_zookeeper-2_1 /etc/confluent/docker/run Up kafkaclusterssl_zookeeper-3_1 /etc/confluent/docker/run Up Check the zookeeper logs to verify that ZooKeeper is healthy. For example, for service zookeeper-1: .. sourcecode:: bash docker-compose logs zookeeper-1 You should see messages like the following: .. sourcecode:: bash zookeeper-1_1 | [2016-07-25 04:58:12,901] INFO Created server with tickTime 2000 minSessionTimeout 4000 maxSessionTimeout 40000 datadir /var/lib/zookeeper/log/version-2 snapdir /var/lib/zookeeper/data/version-2 (org.apache.zookeeper.server.ZooKeeperServer) zookeeper-1_1 | [2016-07-25 04:58:12,902] INFO FOLLOWING - LEADER ELECTION TOOK - 235 (org.apache.zookeeper.server.quorum.Learner) Verify that ZK ensemble is ready .. sourcecode:: bash for i in 22181 32181 42181; do docker run --net=host --rm confluentinc/cp-zookeeper:4.0.0 bash -c "echo stat | nc localhost $i | grep Mode" done You should see one ``leader`` and two ``follower`` instances: .. sourcecode:: bash Mode: follower Mode: leader Mode: follower Check the logs to see the broker has booted up successfully .. sourcecode:: bash docker-compose logs kafka-ssl-1 docker-compose logs kafka-ssl-2 docker-compose logs kafka-ssl-3 You should see start see bootup messages. For example, ``docker-compose logs kafka-3 | grep started`` shows the following .. sourcecode:: bash kafka-ssl-3_1 | [2016-07-25 04:58:15,189] INFO [Kafka Server 3], started (kafka.server.KafkaServer) kafka-ssl-3_1 | [2016-07-25 04:58:15,189] INFO [Kafka Server 3], started (kafka.server.KafkaServer) You should see the messages like the following on the broker acting as controller. .. sourcecode:: bash (Tip: `docker-compose logs | grep controller` makes it easy to grep through logs for all services.) kafka-ssl-3_1 | [2016-08-24 23:38:22,762] INFO [Controller-3-to-broker-1-send-thread], Controller 3 connected to localhost:19093 (id: 1 rack: null) for sending state change requests (kafka.controller.RequestSendThread) kafka-ssl-3_1 | [2016-08-24 23:38:22,763] INFO [Controller-3-to-broker-2-send-thread], Controller 3 connected to localhost:29093 (id: 2 rack: null) for sending state change requests (kafka.controller.RequestSendThread) kafka-ssl-3_1 | [2016-08-24 23:38:22,763] INFO [Controller-3-to-broker-2-send-thread], Controller 3 connected to localhost:29093 (id: 2 rack: null) for sending state change requests (kafka.controller.RequestSendThread) kafka-ssl-3_1 | [2016-08-24 23:38:22,763] INFO [Controller-3-to-broker-2-send-thread], Controller 3 connected to localhost:29093 (id: 2 rack: null) for sending state change requests (kafka.controller.RequestSendThread) kafka-ssl-3_1 | [2016-08-24 23:38:22,762] INFO [Controller-3-to-broker-1-send-thread], Controller 3 connected to localhost:19093 (id: 1 rack: null) for sending state change requests (kafka.controller.RequestSendThread) 3. Follow section 5 in the "Docker Client" section above to test that your brokers are functioning as expected. 4. To stop the cluster, first stop Kafka nodes one-by-one and then stop the ZooKeeper cluster. .. sourcecode:: bash docker-compose stop kafka-ssl-1 docker-compose stop kafka-ssl-2 docker-compose stop kafka-ssl-3 docker-compose down