Trunks

An SLA trunk is a mapping between a virtual trunk and a real Asterisk device. This device may be an analog FXO line, or something like a SIP trunk. A trunk must be configured in two places. First, configure the device itself in the channel specific configuration file such as dahdi.conf or sip.conf. Once the trunk is configured, then map it to an SLA trunk in sla.conf.

• [line1]
  type=trunk
  device=DAHDI/1
  

Be sure to configure the trunk's context to be the same one that is set for the "autocontext" option in sla.conf if automatic dialplan configuration is used. This would be done in the regular device entry in dahdi.conf, sip.conf, etc. Note that the automatic dialplan generation creates the SLATrunk() extension at extension 's'. This is perfect for DAHDI channels that are FXO trunks, for example. However, it may not be good enough for an IP trunk, since the call coming in over the trunk may specify an actual number.

If the dialplan is being built manually, ensure that calls coming in on a trunk execute the SLATrunk() application with an argument of the trunk name, as shown in the dialplan example before.

IP trunks can be used, but they require some additional configuration to work.

For this example, let's say we have a SIP trunk called "mytrunk" that is going to be used as line4. Furthermore, when calls come in on this trunk, they are going to say that they are calling the number "12564286000". Also, let's say that the numbers that are valid for calling out this trunk are NANP numbers, of the form _1NXXNXXXXXX.

In sip.conf, there would be an entry for [mytrunk]. For [mytrunk], set context=line4.

• [line4]
  type=trunk
  device=Local/disa@line4_outbound
  

• [line4]
  exten => 12564286000,1,SLATrunk(line4)
  
  [line4_outbound]
  exten => disa,1,Disa(no-password,line4_outbound)
  exten => _1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@mytrunk)
  

So, when a station picks up their phone and connects to line 4, they are connected to the local dialplan. The Disa application plays dialtone to the phone and collects digits until it matches an extension. In this case, once the phone dials a number like 12565551212, the call will proceed out the SIP trunk.