![]() |
LAPACK
3.7.0
LAPACK: Linear Algebra PACKage
|
program zchkee | ( | ) |
ZCHKEE
ZCHKEE tests the COMPLEX*16 LAPACK subroutines for the matrix eigenvalue problem. The test paths in this version are NEP (Nonsymmetric Eigenvalue Problem): Test ZGEHRD, ZUNGHR, ZHSEQR, ZTREVC, ZHSEIN, and ZUNMHR SEP (Hermitian Eigenvalue Problem): Test ZHETRD, ZUNGTR, ZSTEQR, ZSTERF, ZSTEIN, ZSTEDC, and drivers ZHEEV(X), ZHBEV(X), ZHPEV(X), ZHEEVD, ZHBEVD, ZHPEVD SVD (Singular Value Decomposition): Test ZGEBRD, ZUNGBR, and ZBDSQR and the drivers ZGESVD, ZGESDD ZEV (Nonsymmetric Eigenvalue/eigenvector Driver): Test ZGEEV ZES (Nonsymmetric Schur form Driver): Test ZGEES ZVX (Nonsymmetric Eigenvalue/eigenvector Expert Driver): Test ZGEEVX ZSX (Nonsymmetric Schur form Expert Driver): Test ZGEESX ZGG (Generalized Nonsymmetric Eigenvalue Problem): Test ZGGHD3, ZGGBAL, ZGGBAK, ZHGEQZ, and ZTGEVC ZGS (Generalized Nonsymmetric Schur form Driver): Test ZGGES ZGV (Generalized Nonsymmetric Eigenvalue/eigenvector Driver): Test ZGGEV ZGX (Generalized Nonsymmetric Schur form Expert Driver): Test ZGGESX ZXV (Generalized Nonsymmetric Eigenvalue/eigenvector Expert Driver): Test ZGGEVX ZSG (Hermitian Generalized Eigenvalue Problem): Test ZHEGST, ZHEGV, ZHEGVD, ZHEGVX, ZHPGST, ZHPGV, ZHPGVD, ZHPGVX, ZHBGST, ZHBGV, ZHBGVD, and ZHBGVX ZHB (Hermitian Band Eigenvalue Problem): Test ZHBTRD ZBB (Band Singular Value Decomposition): Test ZGBBRD ZEC (Eigencondition estimation): Test ZTRSYL, ZTREXC, ZTRSNA, and ZTRSEN ZBL (Balancing a general matrix) Test ZGEBAL ZBK (Back transformation on a balanced matrix) Test ZGEBAK ZGL (Balancing a matrix pair) Test ZGGBAL ZGK (Back transformation on a matrix pair) Test ZGGBAK GLM (Generalized Linear Regression Model): Tests ZGGGLM GQR (Generalized QR and RQ factorizations): Tests ZGGQRF and ZGGRQF GSV (Generalized Singular Value Decomposition): Tests ZGGSVD, ZGGSVP, ZTGSJA, ZLAGS2, ZLAPLL, and ZLAPMT CSD (CS decomposition): Tests ZUNCSD LSE (Constrained Linear Least Squares): Tests ZGGLSE Each test path has a different set of inputs, but the data sets for the driver routines xEV, xES, xVX, and xSX can be concatenated in a single input file. The first line of input should contain one of the 3-character path names in columns 1-3. The number of remaining lines depends on what is found on the first line. The number of matrix types used in testing is often controllable from the input file. The number of matrix types for each path, and the test routine that describes them, is as follows: Path name(s) Types Test routine ZHS or NEP 21 ZCHKHS ZST or SEP 21 ZCHKST (routines) 18 ZDRVST (drivers) ZBD or SVD 16 ZCHKBD (routines) 5 ZDRVBD (drivers) ZEV 21 ZDRVEV ZES 21 ZDRVES ZVX 21 ZDRVVX ZSX 21 ZDRVSX ZGG 26 ZCHKGG (routines) ZGS 26 ZDRGES ZGX 5 ZDRGSX ZGV 26 ZDRGEV ZXV 2 ZDRGVX ZSG 21 ZDRVSG ZHB 15 ZCHKHB ZBB 15 ZCHKBB ZEC - ZCHKEC ZBL - ZCHKBL ZBK - ZCHKBK ZGL - ZCHKGL ZGK - ZCHKGK GLM 8 ZCKGLM GQR 8 ZCKGQR GSV 8 ZCKGSV CSD 3 ZCKCSD LSE 8 ZCKLSE ----------------------------------------------------------------------- NEP input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NPARMS, INTEGER Number of values of the parameters NB, NBMIN, NX, NS, and MAXB. line 5: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 6: NBMIN, INTEGER array, dimension (NPARMS) The values for the minimum blocksize NBMIN. line 7: NXVAL, INTEGER array, dimension (NPARMS) The values for the crossover point NX. line 8: INMIN, INTEGER array, dimension (NPARMS) LAHQR vs TTQRE crossover point, >= 11 line 9: INWIN, INTEGER array, dimension (NPARMS) recommended deflation window size line 10: INIBL, INTEGER array, dimension (NPARMS) nibble crossover point line 11: ISHFTS, INTEGER array, dimension (NPARMS) number of simultaneous shifts) line 12: IACC22, INTEGER array, dimension (NPARMS) select structured matrix multiply: 0, 1 or 2) line 13: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. To have all of the test ratios printed, use THRESH = 0.0 . line 14: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 14 was 2: line 15: INTEGER array, dimension (4) Four integer values for the random number seed. lines 15-EOF: The remaining lines occur in sets of 1 or 2 and allow the user to specify the matrix types. Each line contains a 3-character path name in columns 1-3, and the number of matrix types must be the first nonblank item in columns 4-80. If the number of matrix types is at least 1 but is less than the maximum number of possible types, a second line will be read to get the numbers of the matrix types to be used. For example, NEP 21 requests all of the matrix types for the nonsymmetric eigenvalue problem, while NEP 4 9 10 11 12 requests only matrices of type 9, 10, 11, and 12. The valid 3-character path names are 'NEP' or 'ZHS' for the nonsymmetric eigenvalue routines. ----------------------------------------------------------------------- SEP or ZSG input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NPARMS, INTEGER Number of values of the parameters NB, NBMIN, and NX. line 5: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 6: NBMIN, INTEGER array, dimension (NPARMS) The values for the minimum blocksize NBMIN. line 7: NXVAL, INTEGER array, dimension (NPARMS) The values for the crossover point NX. line 8: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 9: TSTCHK, LOGICAL Flag indicating whether or not to test the LAPACK routines. line 10: TSTDRV, LOGICAL Flag indicating whether or not to test the driver routines. line 11: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 12: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 12 was 2: line 13: INTEGER array, dimension (4) Four integer values for the random number seed. lines 13-EOF: Lines specifying matrix types, as for NEP. The valid 3-character path names are 'SEP' or 'ZST' for the Hermitian eigenvalue routines and driver routines, and 'ZSG' for the routines for the Hermitian generalized eigenvalue problem. ----------------------------------------------------------------------- SVD input file: line 2: NN, INTEGER Number of values of M and N. line 3: MVAL, INTEGER array, dimension (NN) The values for the matrix row dimension M. line 4: NVAL, INTEGER array, dimension (NN) The values for the matrix column dimension N. line 5: NPARMS, INTEGER Number of values of the parameter NB, NBMIN, NX, and NRHS. line 6: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 7: NBMIN, INTEGER array, dimension (NPARMS) The values for the minimum blocksize NBMIN. line 8: NXVAL, INTEGER array, dimension (NPARMS) The values for the crossover point NX. line 9: NSVAL, INTEGER array, dimension (NPARMS) The values for the number of right hand sides NRHS. line 10: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 11: TSTCHK, LOGICAL Flag indicating whether or not to test the LAPACK routines. line 12: TSTDRV, LOGICAL Flag indicating whether or not to test the driver routines. line 13: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 14: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 14 was 2: line 15: INTEGER array, dimension (4) Four integer values for the random number seed. lines 15-EOF: Lines specifying matrix types, as for NEP. The 3-character path names are 'SVD' or 'ZBD' for both the SVD routines and the SVD driver routines. ----------------------------------------------------------------------- ZEV and ZES data files: line 1: 'ZEV' or 'ZES' in columns 1 to 3. line 2: NSIZES, INTEGER Number of sizes of matrices to use. Should be at least 0 and at most 20. If NSIZES = 0, no testing is done (although the remaining 3 lines are still read). line 3: NN, INTEGER array, dimension(NSIZES) Dimensions of matrices to be tested. line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHSEQR NBCOL : minimum column dimension for blocking line 5: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. If it is 0., all test case data will be printed. line 6: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 6 was 2: line 7: INTEGER array, dimension (4) Four integer values for the random number seed. lines 8 and following: Lines specifying matrix types, as for NEP. The 3-character path name is 'ZEV' to test CGEEV, or 'ZES' to test CGEES. ----------------------------------------------------------------------- The ZVX data has two parts. The first part is identical to ZEV, and the second part consists of test matrices with precomputed solutions. line 1: 'ZVX' in columns 1-3. line 2: NSIZES, INTEGER If NSIZES = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. line 3: NN, INTEGER array, dimension(NSIZES) line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs line 5: THRESH, REAL line 6: NEWSD, INTEGER If line 6 was 2: line 7: INTEGER array, dimension (4) lines 8 and following: The first line contains 'ZVX' in columns 1-3 followed by the number of matrix types, possibly with a second line to specify certain matrix types. If the number of matrix types = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. remaining lines : Each matrix is stored on 1+N+N**2 lines, where N is its dimension. The first line contains the dimension N and ISRT (two integers). ISRT indicates whether the last N lines are sorted by increasing real part of the eigenvalue (ISRT=0) or by increasing imaginary part (ISRT=1). The next N**2 lines contain the matrix rowwise, one entry per line. The last N lines correspond to each eigenvalue. Each of these last N lines contains 4 real values: the real part of the eigenvalues, the imaginary part of the eigenvalue, the reciprocal condition number of the eigenvalues, and the reciprocal condition number of the vector eigenvector. The end of data is indicated by dimension N=0. Even if no data is to be tested, there must be at least one line containing N=0. ----------------------------------------------------------------------- The ZSX data is like ZVX. The first part is identical to ZEV, and the second part consists of test matrices with precomputed solutions. line 1: 'ZSX' in columns 1-3. line 2: NSIZES, INTEGER If NSIZES = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. line 3: NN, INTEGER array, dimension(NSIZES) line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs line 5: THRESH, REAL line 6: NEWSD, INTEGER If line 6 was 2: line 7: INTEGER array, dimension (4) lines 8 and following: The first line contains 'ZSX' in columns 1-3 followed by the number of matrix types, possibly with a second line to specify certain matrix types. If the number of matrix types = 0, no testing of randomly generated examples is done, but any precomputed examples are tested. remaining lines : Each matrix is stored on 3+N**2 lines, where N is its dimension. The first line contains the dimension N, the dimension M of an invariant subspace, and ISRT. The second line contains M integers, identifying the eigenvalues in the invariant subspace (by their position in a list of eigenvalues ordered by increasing real part (if ISRT=0) or by increasing imaginary part (if ISRT=1)). The next N**2 lines contain the matrix rowwise. The last line contains the reciprocal condition number for the average of the selected eigenvalues, and the reciprocal condition number for the corresponding right invariant subspace. The end of data in indicated by a line containing N=0, M=0, and ISRT = 0. Even if no data is to be tested, there must be at least one line containing N=0, M=0 and ISRT=0. ----------------------------------------------------------------------- ZGG input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NPARMS, INTEGER Number of values of the parameters NB, NBMIN, NBCOL, NS, and MAXB. line 5: NBVAL, INTEGER array, dimension (NPARMS) The values for the blocksize NB. line 6: NBMIN, INTEGER array, dimension (NPARMS) The values for NBMIN, the minimum row dimension for blocks. line 7: NSVAL, INTEGER array, dimension (NPARMS) The values for the number of shifts. line 8: MXBVAL, INTEGER array, dimension (NPARMS) The values for MAXB, used in determining minimum blocksize. line 9: IACC22, INTEGER array, dimension (NPARMS) select structured matrix multiply: 1 or 2) line 10: NBCOL, INTEGER array, dimension (NPARMS) The values for NBCOL, the minimum column dimension for blocks. line 11: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 12: TSTCHK, LOGICAL Flag indicating whether or not to test the LAPACK routines. line 13: TSTDRV, LOGICAL Flag indicating whether or not to test the driver routines. line 14: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 15: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 15 was 2: line 16: INTEGER array, dimension (4) Four integer values for the random number seed. lines 17-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'ZGG' for the generalized eigenvalue problem routines and driver routines. ----------------------------------------------------------------------- ZGS and ZGV input files: line 1: 'ZGS' or 'ZGV' in columns 1 to 3. line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension(NN) Dimensions of matrices to be tested. line 4: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHGEQR NBCOL : minimum column dimension for blocking line 5: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. If it is 0., all test case data will be printed. line 6: TSTERR, LOGICAL Flag indicating whether or not to test the error exits. line 7: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 17 was 2: line 7: INTEGER array, dimension (4) Four integer values for the random number seed. lines 7-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'ZGS' for the generalized eigenvalue problem routines and driver routines. ----------------------------------------------------------------------- ZGX input file: line 1: 'ZGX' in columns 1 to 3. line 2: N, INTEGER Value of N. line 3: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHGEQR NBCOL : minimum column dimension for blocking line 4: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 5: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 6: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 6 was 2: line 7: INTEGER array, dimension (4) Four integer values for the random number seed. If line 2 was 0: line 7-EOF: Precomputed examples are tested. remaining lines : Each example is stored on 3+2*N*N lines, where N is its dimension. The first line contains the dimension (a single integer). The next line contains an integer k such that only the last k eigenvalues will be selected and appear in the leading diagonal blocks of $A$ and $B$. The next N*N lines contain the matrix A, one element per line. The next N*N lines contain the matrix B. The last line contains the reciprocal of the eigenvalue cluster condition number and the reciprocal of the deflating subspace (associated with the selected eigencluster) condition number. The end of data is indicated by dimension N=0. Even if no data is to be tested, there must be at least one line containing N=0. ----------------------------------------------------------------------- ZXV input files: line 1: 'ZXV' in columns 1 to 3. line 2: N, INTEGER Value of N. line 3: NB, NBMIN, NX, NS, NBCOL, INTEGERs These integer parameters determine how blocking is done (see ILAENV for details) NB : block size NBMIN : minimum block size NX : minimum dimension for blocking NS : number of shifts in xHGEQR NBCOL : minimum column dimension for blocking line 4: THRESH, REAL The test threshold against which computed residuals are compared. Should generally be in the range from 10. to 20. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 5: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 6: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 6 was 2: line 7: INTEGER array, dimension (4) Four integer values for the random number seed. If line 2 was 0: line 7-EOF: Precomputed examples are tested. remaining lines : Each example is stored on 3+2*N*N lines, where N is its dimension. The first line contains the dimension (a single integer). The next N*N lines contain the matrix A, one element per line. The next N*N lines contain the matrix B. The next line contains the reciprocals of the eigenvalue condition numbers. The last line contains the reciprocals of the eigenvector condition numbers. The end of data is indicated by dimension N=0. Even if no data is to be tested, there must be at least one line containing N=0. ----------------------------------------------------------------------- ZHB input file: line 2: NN, INTEGER Number of values of N. line 3: NVAL, INTEGER array, dimension (NN) The values for the matrix dimension N. line 4: NK, INTEGER Number of values of K. line 5: KVAL, INTEGER array, dimension (NK) The values for the matrix dimension K. line 6: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 7 was 2: line 8: INTEGER array, dimension (4) Four integer values for the random number seed. lines 8-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'ZHB'. ----------------------------------------------------------------------- ZBB input file: line 2: NN, INTEGER Number of values of M and N. line 3: MVAL, INTEGER array, dimension (NN) The values for the matrix row dimension M. line 4: NVAL, INTEGER array, dimension (NN) The values for the matrix column dimension N. line 4: NK, INTEGER Number of values of K. line 5: KVAL, INTEGER array, dimension (NK) The values for the matrix bandwidth K. line 6: NPARMS, INTEGER Number of values of the parameter NRHS line 7: NSVAL, INTEGER array, dimension (NPARMS) The values for the number of right hand sides NRHS. line 8: THRESH Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 9: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 9 was 2: line 10: INTEGER array, dimension (4) Four integer values for the random number seed. lines 10-EOF: Lines specifying matrix types, as for SVD. The 3-character path name is 'ZBB'. ----------------------------------------------------------------------- ZEC input file: line 2: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. lines 3-EOF: Input for testing the eigencondition routines consists of a set of specially constructed test cases and their solutions. The data format is not intended to be modified by the user. ----------------------------------------------------------------------- ZBL and ZBK input files: line 1: 'ZBL' in columns 1-3 to test CGEBAL, or 'ZBK' in columns 1-3 to test CGEBAK. The remaining lines consist of specially constructed test cases. ----------------------------------------------------------------------- ZGL and ZGK input files: line 1: 'ZGL' in columns 1-3 to test ZGGBAL, or 'ZGK' in columns 1-3 to test ZGGBAK. The remaining lines consist of specially constructed test cases. ----------------------------------------------------------------------- GLM data file: line 1: 'GLM' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M (row dimension). line 4: PVAL, INTEGER array, dimension(NN) Values of P (row dimension). line 5: NVAL, INTEGER array, dimension(NN) Values of N (column dimension), note M <= N <= M+P. line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'GLM' for the generalized linear regression model routines. ----------------------------------------------------------------------- GQR data file: line 1: 'GQR' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M. line 4: PVAL, INTEGER array, dimension(NN) Values of P. line 5: NVAL, INTEGER array, dimension(NN) Values of N. line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'GQR' for the generalized QR and RQ routines. ----------------------------------------------------------------------- GSV data file: line 1: 'GSV' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M (row dimension). line 4: PVAL, INTEGER array, dimension(NN) Values of P (row dimension). line 5: NVAL, INTEGER array, dimension(NN) Values of N (column dimension). line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'GSV' for the generalized SVD routines. ----------------------------------------------------------------------- CSD data file: line 1: 'CSD' in columns 1 to 3. line 2: NM, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NM) Values of M (row and column dimension of orthogonal matrix). line 4: PVAL, INTEGER array, dimension(NM) Values of P (row dimension of top-left block). line 5: NVAL, INTEGER array, dimension(NM) Values of N (column dimension of top-left block). line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'CSD' for the CSD routine. ----------------------------------------------------------------------- LSE data file: line 1: 'LSE' in columns 1 to 3. line 2: NN, INTEGER Number of values of M, P, and N. line 3: MVAL, INTEGER array, dimension(NN) Values of M. line 4: PVAL, INTEGER array, dimension(NN) Values of P. line 5: NVAL, INTEGER array, dimension(NN) Values of N, note P <= N <= P+M. line 6: THRESH, REAL Threshold value for the test ratios. Information will be printed about each test for which the test ratio is greater than or equal to the threshold. line 7: TSTERR, LOGICAL Flag indicating whether or not to test the error exits for the LAPACK routines and driver routines. line 8: NEWSD, INTEGER A code indicating how to set the random number seed. = 0: Set the seed to a default value before each run = 1: Initialize the seed to a default value only before the first run = 2: Like 1, but use the seed values on the next line If line 8 was 2: line 9: INTEGER array, dimension (4) Four integer values for the random number seed. lines 9-EOF: Lines specifying matrix types, as for NEP. The 3-character path name is 'GSV' for the generalized SVD routines. ----------------------------------------------------------------------- NMAX is currently set to 132 and must be at least 12 for some of the precomputed examples, and LWORK = NMAX*(5*NMAX+20) in the parameter statements below. For SVD, we assume NRHS may be as big as N. The parameter NEED is set to 14 to allow for 14 N-by-N matrices for ZGG.
Definition at line 1035 of file zchkee.f.