Join Points and Pointcuts

Consider the following Java class:

class Point {
    private int x, y;

    Point(int x, int y) { this.x = x; this.y = y; }

    void setX(int x) { this.x = x; }
    void setY(int y) { this.y = y; }

    int getX() { return x; }
    int getY() { return y; }
}

In order to get an intuitive understanding of AspectJ's join points and pointcuts, let's go back to some of the basic principles of Java. Consider the following a method declaration in class Point:

void setX(int x) { this.x = x; }

This piece of program says that that when method named setX with an int argument called on an object of type Point, then the method body { this.x = x; } is executed. Similarly, the constructor of the class states that when an object of type Point is instantiated through a constructor with two int arguments, then the constructor body { this.x = x; this.y = y; } is executed.

One pattern that emerges from these descriptions is

When something happens, then something gets executed.
In object-oriented programs, there are several kinds of "things that happen" that are determined by the language. We call these the join points of Java. Join points consist of things like method calls, method executions, object instantiations, constructor executions, field references and handler executions. (See the AspectJ Quick Reference for a complete listing.)

Pointcuts pick out these join points. For example, the pointcut

pointcut setter(): target(Point) &&
                   (call(void setX(int)) ||
                    call(void setY(int)));

picks out each call to setX(int) or setY(int) when called on an instance of Point. Here's another example:

pointcut ioHandler(): within(MyClass) && handler(IOException);

This pointcut picks out each the join point when exceptions of type IOException are handled inside the code defined by class MyClass.

Pointcut definitions consist of a left-hand side and a right-hand side, separated by a colon. The left-hand side consists of the pointcut name and the pointcut parameters (i.e. the data available when the events happen). The right-hand side consists of the pointcut itself.

Some Example Pointcuts

Here are examples of pointcuts picking out

when a particular method body executes

execution(void Point.setX(int))

when a method is called

call(void Point.setX(int))

when an exception handler executes

handler(ArrayOutOfBoundsException)

when the object currently executing (i.e. this) is of type SomeType

this(SomeType)

when the target object is of type SomeType

target(SomeType)

when the executing code belongs to class MyClass

within(MyClass)

when the join point is in the control flow of a call to a Test's no-argument main method

cflow(call(void Test.main()))

Pointcuts compose through the operations or ("||"), and ("&&") and not ("!").

  • It is possible to use wildcards. So

    1. execution(* *(..))

    2. call(* set(..))

    means (1) the execution of any method regardless of return or parameter types, and (2) the call to any method named set regardless of return or parameter types -- in case of overloading there may be more than one such set method; this pointcut picks out calls to all of them.

  • You can select elements based on types. For example,

    1. execution(int *())

    2. call(* setY(long))

    3. call(* Point.setY(int))

    4. call(*.new(int, int))

    means (1) the execution of any method with no parameters that returns an int, (2) the call to any setY method that takes a long as an argument, regardless of return type or declaring type, (3) the call to any of Point's setY methods that take an int as an argument, regardless of return type, and (4) the call to any classes' constructor, so long as it takes exactly two ints as arguments.

  • You can compose pointcuts. For example,

    1. target(Point) && call(int *())

    2. call(* *(..)) && (within(Line) || within(Point))

    3. within(*) && execution(*.new(int))

    4. !this(Point) && call(int *(..))

    means (1) any call to an int method with no arguments on an instance of Point, regardless of its name, (2) any call to any method where the call is made from the code in Point's or Line's type declaration, (3) the execution of any constructor taking exactly one int argument, regardless of where the call is made from, and (4) any method call to an int method when the executing object is any type except Point.

  • You can select methods and constructors based on their modifiers and on negations of modifiers. For example, you can say:

    1. call(public * *(..))

    2. execution(!static * *(..))

    3. execution(public !static * *(..))

    which means (1) any call to a public method, (2) any execution of a non-static method, and (3) any execution of a public, non-static method.

  • Pointcuts can also deal with interfaces. For example, given the interface

    interface MyInterface { ... }
    

    the pointcut call(* MyInterface.*(..)) picks out any call to a method in MyInterface's signature -- that is, any method defined by MyInterface or inherited by one of its a supertypes.

call vs. execution

When methods and constructors run, there are two interesting times associated with them. That is when they are called, and when they actually execute.

AspectJ exposes these times as call and execution join points, respectively, and allows them to be picked out specifically by call and execution pointcuts.

So what's the difference between these join points? Well, there are a number of differences:

Firstly, the lexical pointcut declarations within and withincode match differently. At a call join point, the enclosing code is that of the call site. This means that call(void m()) && withincode(void m()) will only capture directly recursive calls, for example. At an execution join point, however, the program is already executing the method, so the enclosing code is the method itself: execution(void m()) && withincode(void m()) is the same as execution(void m()).

Secondly, the call join point does not capture super calls to non-static methods. This is because such super calls are different in Java, since they don't behave via dynamic dispatch like other calls to non-static methods.

The rule of thumb is that if you want to pick a join point that runs when an actual piece of code runs (as is often the case for tracing), use execution, but if you want to pick one that runs when a particular signature is called (as is often the case for production aspects), use call.

Pointcut composition

Pointcuts are put together with the operators and (spelled &&), or (spelled ||), and not (spelled !). This allows the creation of very powerful pointcuts from the simple building blocks of primitive pointcuts. This composition can be somewhat confusing when used with primitive pointcuts like cflow and cflowbelow. Here's an example:

cflow(P) picks out each join point in the control flow of the join points picked out by P. So, pictorially:

  P ---------------------
    \
     \  cflow of P
      \

What does cflow(P) && cflow(Q) pick out? Well, it picks out each join point that is in both the control flow of P and in the control flow of Q. So...

          P ---------------------
            \
             \  cflow of P
              \
               \
                \
  Q -------------\-------
    \             \
     \  cflow of Q \ cflow(P) && cflow(Q)
      \             \

Note that P and Q might not have any join points in common... but their control flows might have join points in common.

But what does cflow(P && Q) mean? Well, it means the control flow of those join points that are both picked out by P and picked out by Q.

   P && Q -------------------
          \
           \ cflow of (P && Q)
            \

and if there are no join points that are both picked by P and picked out by Q, then there's no chance that there are any join points in the control flow of (P && Q).

Here's some code that expresses this.

public class Test {
    public static void main(String[] args) {
        foo();
    }
    static void foo() {
        goo();
    }
    static void goo() {
        System.out.println("hi");
    }
}

aspect A  {
    pointcut fooPC(): execution(void Test.foo());
    pointcut gooPC(): execution(void Test.goo());
    pointcut printPC(): call(void java.io.PrintStream.println(String));

    before(): cflow(fooPC()) && cflow(gooPC()) && printPC() && !within(A) {
        System.out.println("should occur");
    }

    before(): cflow(fooPC() && gooPC()) && printPC() && !within(A) {
        System.out.println("should not occur");
    }
}

The !within(A) pointcut above is required to avoid the printPC pointcut applying to the System.out.println call in the advice body. If this was not present a recursive call would result as the pointcut would apply to its own advice. (See the section called “Infinite loops” for more details.)

Pointcut Parameters

Consider again the first pointcut definition in this chapter:

  pointcut setter(): target(Point) &&
                     (call(void setX(int)) ||
                      call(void setY(int)));

As we've seen, this pointcut picks out each call to setX(int) or setY(int) methods where the target is an instance of Point. The pointcut is given the name setters and no parameters on the left-hand side. An empty parameter list means that none of the context from the join points is published from this pointcut. But consider another version of version of this pointcut definition:

  pointcut setter(Point p): target(p) &&
                            (call(void setX(int)) ||
                             call(void setY(int)));

This version picks out exactly the same join points. But in this version, the pointcut has one parameter of type Point. This means that any advice that uses this pointcut has access to a Point from each join point picked out by the pointcut. Inside the pointcut definition this Point is named p is available, and according to the right-hand side of the definition, that Point p comes from the target of each matched join point.

Here's another example that illustrates the flexible mechanism for defining pointcut parameters:

  pointcut testEquality(Point p): target(Point) &&
                                  args(p) &&
                                  call(boolean equals(Object));

This pointcut also has a parameter of type Point. Similar to the setters pointcut, this means that anyone using this pointcut has access to a Point from each join point. But in this case, looking at the right-hand side we find that the object named in the parameters is not the target Point object that receives the call; it's the argument (also of type Point) passed to the equals method when some other Point is the target. If we wanted access to both Points, then the pointcut definition that would expose target Point p1 and argument Point p2 would be

  pointcut testEquality(Point p1, Point p2): target(p1) &&
                                             args(p2) &&
                                             call(boolean equals(Object));

Let's look at another variation of the setters pointcut:

pointcut setter(Point p, int newval): target(p) &&
                                      args(newval) &&
                                      (call(void setX(int)) ||
                                       call(void setY(int)));

In this case, a Point object and an int value are exposed by the named pointcut. Looking at the the right-hand side of the definition, we find that the Point object is the target object, and the int value is the called method's argument.

The use of pointcut parameters is relatively flexible. The most important rule is that all the pointcut parameters must be bound at every join point picked out by the pointcut. So, for example, the following pointcut definition will result in a compilation error:

  pointcut badPointcut(Point p1, Point p2):
      (target(p1) && call(void setX(int))) ||
      (target(p2) && call(void setY(int)));
because p1 is only bound when calling setX, and p2 is only bound when calling setY, but the pointcut picks out all of these join points and tries to bind both p1 and p2.

Example: HandleLiveness

The example below consists of two object classes (plus an exception class) and one aspect. Handle objects delegate their public, non-static operations to their Partner objects. The aspect HandleLiveness ensures that, before the delegations, the partner exists and is alive, or else it throws an exception.

  class Handle {
    Partner partner = new Partner();

    public void foo() { partner.foo(); }
    public void bar(int x) { partner.bar(x); }

    public static void main(String[] args) {
      Handle h1 = new Handle();
      h1.foo();
      h1.bar(2);
    }
  }

  class Partner {
    boolean isAlive() { return true; }
    void foo() { System.out.println("foo"); }
    void bar(int x) { System.out.println("bar " + x); }
  }

  aspect HandleLiveness {
    before(Handle handle): target(handle) && call(public * *(..)) {
      if ( handle.partner == null  || !handle.partner.isAlive() ) {
        throw new DeadPartnerException();
      }
    }
  }

  class DeadPartnerException extends RuntimeException {}