The following sections provide basic instructions on using the Ports Collection to install or remove programs from your system. The detailed description of available make targets and environment variables is available in ports(7).
Before you can install ports, you must first obtain the Ports Collection--which is essentially a set of Makefiles, patches, and description files placed in /usr/ports.
When installing your FreeBSD system, sysinstall asked if you would like to install the Ports Collection. If you chose no, you can follow these instructions to obtain the ports collection:
CVSup Method
This is a quick method for getting and keeping your copy of the Ports Collection up to date using CVSup. If you want to learn more about CVSup, see Using CVSup.
Make sure /usr/ports is empty before you run CVSup for the first time! If you already have the Ports Collection present, obtained from another source, CVSup will not prune removed patch files.
Install the net/cvsup-without-gui package:
# pkg_add -r cvsup-without-gui
See CVSup Installation (Section A.5.2) for more details.
Run cvsup:
# cvsup -L 2 -h cvsup.FreeBSD.org /usr/share/examples/cvsup/ports-supfile
Change cvsup.FreeBSD.org to a CVSup server near you. See CVSup Mirrors (Section A.5.7) for a complete listing of mirror sites.
Note: One may want to use his own ports-supfile, for example to avoid the need of passing the CVSup server on the command line.
In this case, as root, copy /usr/share/examples/cvsup/ports-supfile to a new location, such as /root or your home directory.
Edit ports-supfile.
Change CHANGE_THIS.FreeBSD.org to a CVSup server near you. See CVSup Mirrors (Section A.5.7) for a complete listing of mirror sites.
And now to run cvsup, use the following:
# cvsup -L 2 /root/ports-supfile
Running the cvsup(1) command later will download and apply all the recent changes to your Ports Collection, except actually rebuilding the ports for your own system.
Portsnap Method
Portsnap is an alternative system for distributing the Ports Collection. It was first included in FreeBSD 6.0. On older systems, you can install it from sysutils/portsnap package:
# pkg_add -r portsnap
Please refer to Using Portsnap for a detailed description of all Portsnap features.
Since FreeBSD 6.1-RELEASE and with recent versions of the Portsnap port or package, you can safely skip this step. The /usr/ports will be created automatically at first use of the portsnap(8) command. With previous versions of Portsnap, you will have to create an empty directory /usr/ports if it does not exists:
# mkdir /usr/ports
Download a compressed snapshot of the Ports Collection into /var/db/portsnap. You can disconnect from the Internet after this step, if you wish.
# portsnap fetch
If you are running Portsnap for the first time, extract the snapshot into /usr/ports:
# portsnap extract
If you already have a populated /usr/ports and you are just updating, run the following command instead:
# portsnap update
Sysinstall Method
This method involves using sysinstall to install the Ports Collection from the installation media. Note that the old copy of Ports Collection from the date of the release will be installed. If you have Internet access, you should always use one of the methods mentioned above.
As root, run sysinstall (/stand/sysinstall in FreeBSD versions older than 5.2) as shown below:
# sysinstall
Scroll down and select Configure, press Enter.
Scroll down and select Distributions, press Enter.
Scroll down to ports, press Space.
Scroll up to Exit, press Enter.
Select your desired installation media, such as CDROM, FTP, and so on.
Scroll up to Exit and press Enter.
Press X to exit sysinstall.
The first thing that should be explained when it comes to the Ports Collection is what is actually meant by a “skeleton”. In a nutshell, a port skeleton is a minimal set of files that tell your FreeBSD system how to cleanly compile and install a program. Each port skeleton includes:
A Makefile. The Makefile contains various statements that specify how the application should be compiled and where it should be installed on your system.
A distinfo file. This file contains information about the files that must be downloaded to build the port and their checksums, to verify that files have not been corrupted during the download using md5(1).
A files directory. This directory contains patches to make the program compile and install on your FreeBSD system. Patches are basically small files that specify changes to particular files. They are in plain text format, and basically say “Remove line 10” or “Change line 26 to this ...”. Patches are also known as “diffs” because they are generated by the diff(1) program.
This directory may also contain other files used to build the port.
A pkg-descr file. This is a more detailed, often multiple-line, description of the program.
A pkg-plist file. This is a list of all the files that will be installed by the port. It also tells the ports system what files to remove upon deinstallation.
Some ports have other files, such as pkg-message. The ports system uses these files to handle special situations. If you want more details on these files, and on ports in general, check out the FreeBSD Porter's Handbook.
The port includes instructions on how to build source code, but does not include the actual source code. You can get the source code from a CD-ROM or from the Internet. Source code is distributed in whatever manner the software author desires. Frequently this is a tarred and gzipped file, but it might be compressed with some other tool or even uncompressed. The program source code, whatever form it comes in, is called a “distfile”. The two methods for installing a FreeBSD port are described below.
Note: You must be logged in as root to install ports.
Warning: Before installing any port, you should be sure to have an up-to-date Ports Collection and you should check http://vuxml.freebsd.org/ for security issues related to your port.
A security vulnerabilities check can be automatically done by portaudit before any new application installation. This tool can be found in the Ports Collection (security/portaudit). Consider running portaudit -F before installing a new port, to fetch the current vulnerabilities database. A security audit and an update of the database will be performed during the daily security system check. For more information read the portaudit(1) and periodic(8) manual pages.
The Ports Collection makes an assumption that you have a working Internet connection. If you do not, you will need to put a copy of the distfile into /usr/ports/distfiles manually.
To begin, change to the directory for the port you want to install:
# cd /usr/ports/sysutils/lsof
Once inside the lsof directory, you will see the port skeleton. The next step is to compile, or “build”, the port. This is done by simply typing make at the prompt. Once you have done so, you should see something like this:
# make >> lsof_4.57D.freebsd.tar.gz doesn't seem to exist in /usr/ports/distfiles/. >> Attempting to fetch from ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/. ===> Extracting for lsof-4.57 ... [extraction output snipped] ... >> Checksum OK for lsof_4.57D.freebsd.tar.gz. ===> Patching for lsof-4.57 ===> Applying FreeBSD patches for lsof-4.57 ===> Configuring for lsof-4.57 ... [configure output snipped] ... ===> Building for lsof-4.57 ... [compilation output snipped] ... #
Notice that once the compile is complete you are returned to your prompt. The next step is to install the port. In order to install it, you simply need to tack one word onto the make command, and that word is install:
# make install
===> Installing for lsof-4.57
...
[installation output snipped]
...
===> Generating temporary packing list
===> Compressing manual pages for lsof-4.57
===> Registering installation for lsof-4.57
===> SECURITY NOTE:
This port has installed the following binaries which execute with
increased privileges.
#
Once you are returned to your prompt, you should be able to run the application you just installed. Since lsof is a program that runs with increased privileges, a security warning is shown. During the building and installation of ports, you should take heed of any other warnings that may appear.
It is a good idea to delete the working subdirectory, which contains all the temporary files used during compilation. Not only it consumes a valuable disk space, it would also cause problems later when upgrading to the newer version of the port.
# make clean ===> Cleaning for lsof-4.57 #
Note: You can save two extra steps by just running make install clean instead of make, make install and make clean as three separate steps.
Note: Some shells keep a cache of the commands that are available in the directories listed in the PATH environment variable, to speed up lookup operations for the executable file of these commands. If you are using one of these shells, you might have to use the rehash command after installing a port, before the newly installed commands can be used. This command will work for shells like tcsh. Use the hash -r command for shells like sh. Look at the documentation for your shell for more information.
Some third party DVD-ROM products such as the FreeBSD Toolkit from the FreeBSD Mall contain distfiles. They can be used with the Ports Collection. Mount the DVD-ROM on /cdrom. If you use a different mount point, set CD_MOUNTPTS make variable. The needed distfiles will be automatically used if they are present on the disk.
Note: Please be aware that the licenses of a few ports do not allow for inclusion on the CD-ROM. This could be because a registration form needs to be filled out before downloading or redistribution is not allowed, or for another reason. If you wish to install a port not included on the CD-ROM, you will need to be online in order to do so.
The ports system uses fetch(1) to download the files, which honors various environment variables, including FTP_PASSIVE_MODE, FTP_PROXY, and FTP_PASSWORD. You may need to set one or more of these if you are behind a firewall, or need to use an FTP/HTTP proxy. See fetch(3) for the complete list.
For users which cannot be connected all the time, the make fetch option is provided. Just run this command at the top level directory (/usr/ports) and the required files will be downloaded for you. This command will also work in the lower level categories, for example: /usr/ports/net. Note that if a port depends on libraries or other ports this will not fetch the distfiles of those ports too. Replace fetch with fetch-recursive if you want to fetch all the dependencies of a port too.
Note: You can build all the ports in a category or as a whole by running make in the top level directory, just like the aforementioned make fetch method. This is dangerous, however, as some ports cannot co-exist. In other cases, some ports can install two different files with the same filename.
In some rare cases, users may need to acquire the tarballs from a site other than the MASTER_SITES (the location where files are downloaded from). You can override the MASTER_SITES option with the following command:
# cd /usr/ports/directory # make MASTER_SITE_OVERRIDE= \ ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/ fetch
In this example we change the MASTER_SITES option to ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/.
Note: Some ports allow (or even require) you to provide build options which can enable/disable parts of the application which are unneeded, certain security options, and other customizations. A few which come to mind are www/mozilla, security/gpgme, and mail/sylpheed-claws. A message will be displayed when options such as these are available.
Sometimes it is useful (or mandatory) to use a different working and target directory. The WRKDIRPREFIX and PREFIX variables can override the default directories. For example:
# make WRKDIRPREFIX=/usr/home/example/ports install
will compile the port in /usr/home/example/ports and install everything under /usr/local.
# make PREFIX=/usr/home/example/local install
will compile it in /usr/ports and install it in /usr/home/example/local.
And of course,
# make WRKDIRPREFIX=../ports PREFIX=../local install
will combine the two (it is too long to completely write on this page, but it should give you the general idea).
Alternatively, these variables can also be set as part of your environment. Read the manual page for your shell for instructions on doing so.
Some ports that use imake (a part of the X Window System) do not work well with PREFIX, and will insist on installing under /usr/X11R6. Similarly, some Perl ports ignore PREFIX and install in the Perl tree. Making these ports respect PREFIX is a difficult or impossible job.
Now that you know how to install ports, you are probably wondering how to remove them, just in case you install one and later on decide that you installed the wrong port. We will remove our previous example (which was lsof for those of you not paying attention). Ports are being removed exactly the same as the packages (discussed in the Packages section), using the pkg_delete(1) command:
# pkg_delete lsof-4.57
First, list outdated ports that have a newer version available in the Ports Collection with the pkg_version(1) command:
# pkg_version -v
Note: Once you updated your Ports Collection, before attempting a port upgrade, you should check the /usr/ports/UPDATING file. This file describes various issues and additional steps users may encounter and need to perform when updating a port.
The portupgrade utility is designed to easily upgrade installed ports. It is available from the sysutils/portupgrade port. Install it like any other port, using the make install clean command:
# cd /usr/ports/sysutils/portupgrade # make install clean
Scan the list of installed ports with the pkgdb -F command and fix all the inconsistencies it reports. It is a good idea to do this regularly, before every upgrade.
When you run portupgrade -a, portupgrade will begin to upgrade all the outdated ports
installed on your system. Use the -i flag if you want to be
asked for confirmation of every individual upgrade.
# portupgrade -ai
If you want to upgrade only a certain application, not all available ports, use portupgrade pkgname. Include the
-R flag if portupgrade should
first upgrade all the ports required by the given application.
# portupgrade -R firefox
To use packages instead of ports for installation, provide -P flag. With this option portupgrade
searches the local directories listed in PKG_PATH, or fetches
packages from remote site if it is not found locally. If packages can not be found
locally or fetched remotely, portupgrade will use ports. To
avoid using ports, specify -PP.
# portupgrade -PR gnome2
To just fetch distfiles (or packages, if -P is specified)
without building or installing anything, use -F. For further
information see
portupgrade(1).
Portmanager is another utility for easy upgrading of installed ports. It is available from the sysutils/portmanager port:
# cd /usr/ports/sysutils/portmanager # make install clean
All the installed ports can be upgraded using this simple command:
# portmanager -u
You can add the -ui flag to get asked for confirmation of
every step Portmanager will perform. Portmanager can also be used to install new ports on the system.
Unlike the usual make install clean command, it will upgrade all
the dependencies prior to building and installing the selected port.
# portmanager x11/gnome2
If there are any problems regarding the dependencies for the selected port, you can use Portmanager to rebuild all of them in the correct order. Once finished, the problematic port will be rebuilt too.
# portmanager graphics/gimp -f
For more information see Portmanager's manual page.
Using the Ports Collection will use up disk space over time. After building and installing software from the ports, you should always remember to clean up the temporary work directories using the make clean command. You can sweep the whole Ports Collection with the following command:
# portsclean -C
You will accumulate a lot of old source distribution files in the distfiles directory over time. You can remove them by hand, or you can use the following command to delete all the distfiles that are no longer referenced by any ports:
# portsclean -D
Note: The portsclean utility is part of the portupgrade suite.
Do not forget to remove the installed ports once you no longer need them. A nice tool to help automate this task is available from the sysutils/pkg_cutleaves port.
This, and other documents, can be downloaded from ftp://ftp.FreeBSD.org/pub/FreeBSD/doc/.
For questions about FreeBSD, read the documentation before contacting <[email protected]>.
For questions about this documentation, e-mail <[email protected]>.