gcc最佳编译参数
摘要
本文着重介绍在不同的硬件环境下给GCC指定哪些参数才可以得到最佳的性能。
这篇文章是从一个名为Gentoo Linux的发行版的编程说明书里面分离出来的，希望对大家编译程序有帮助。(2002-09-19 22:41:25)
By 泛舟, 出处：http://www.linuxfab.cx
一、1.2版(gcc 2.9.x版)
i386 (Intel), do you really want to install gentoo on that?
CHOST="i386-pc-linux-gnu"
CFLAGS="-march=i386 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=i386 -O3 -pipe -fomit-frame-pointer"
i486 (Intel), do you really want to install gentoo on that?
CHOST="i486-pc-linux-gnu"
CFLAGS="-march=i486 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=i486 -O3 -pipe -fomit-frame-pointer"
Pentium, Pentium MMX+, Celeron (Mendocino) (Intel)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=pentium -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium -O3 -pipe -fomit-frame-pointer"
Pentium Pro/II/III/4, Celeron (Coppermine), Celeron (Willamette?) (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=i686 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=i686 -O3 -pipe -fomit-frame-pointer"
Eden C3/Ezra (Via)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=i586 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=i586 -O3 -pipe -fomit-frame-pointer"
Quote : I did the original gentoo install using 1.2, with gcc 2.95 using -march=i586. i686 won't work.
K6 or beyond (AMD)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=k6 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=k6 -O3 -pipe -fomit-frame-pointer"
(A Duron will report "Athlon" in its /proc/cpuinfo)
Athlon (AMD)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=k6 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=k6 -O3 -pipe -fomit-frame-pointer"
For the following, i don't know of any flag that enhance performances..., do you ?
PowerPC
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer"
Sparc
CHOST="sparc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer"
Sparc 64
CHOST="sparc64-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer"
二、1.4版(gcc 3.x版):
i386 (Intel), do you really want to install gentoo on that ?
CHOST="i386-pc-linux-gnu"
CFLAGS="-march=i386 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=i386 -O3 -pipe -fomit-frame-pointer"
i486 (Intel), do you really want to install gentoo on that ?
CHOST="i486-pc-linux-gnu"
CFLAGS="-march=i486 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=i486 -O3 -pipe -fomit-frame-pointer"
Pentium 1 (Intel)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=pentium -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium -O3 -pipe -fomit-frame-pointer"
Pentium MMX (Intel)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=pentium-mmx -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium-mmx -O3 -pipe -fomit-frame-pointer"
Pentium PRO (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentiumpro -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentiumpro -O3 -pipe -fomit-frame-pointer"
Pentium II (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium2 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium2 -O3 -pipe -fomit-frame-pointer"
Celeron (Mendocino), aka Celeron1 (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium2 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium2 -O3 -pipe -fomit-frame-pointer"
Pentium III (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium3 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium3 -O3 -pipe -fomit-frame-pointer"
Celeron (Coppermine) aka Celeron2 (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium3 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium3 -O3 -pipe -fomit-frame-pointer"
Celeron (Willamette?) (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium4 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium4 -O3 -pipe -fomit-frame-pointer"
Pentium 4 (Intel)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=pentium4 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=pentium4 -O3 -pipe -fomit-frame-pointer"
Eden C3/Ezra (Via)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=i586 -m3dnow -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=i586 -m3dnow -O3 -pipe -fomit-frame-pointer"
quote : the ezra doesn't have any special instructions that you could optimize for, just consider is a K6-3...basically
a p2 with 3dnow
K6 (AMD)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=k6 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=k6 -O3 -pipe -fomit-frame-pointer"
K6-2 (AMD)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=k6-2 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=k6-2 -O3 -pipe -fomit-frame-pointer"
K6-3 (AMD)
CHOST="i586-pc-linux-gnu"
CFLAGS="-march=k6-3 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=k6-3 -O3 -pipe -fomit-frame-pointer"
Athlon (AMD)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=athlon -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=athlon -O3 -pipe -fomit-frame-pointer"
Athlon-tbird, aka K7 (AMD)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=athlon-tbird -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=athlon-tbird -O3 -pipe -fomit-frame-pointer"
Athlon-tbird XP (AMD)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
Athlon 4(AMD)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=athlon-4 -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=athlon-4 -O3 -pipe -fomit-frame-pointer"
Athlon XP (AMD)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
Athlon MP (AMD)
CHOST="i686-pc-linux-gnu"
CFLAGS="-march=athlon-mp -O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-march=athlon-mp -O3 -pipe -fomit-frame-pointer"
603 (PowerPC)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
603e (PowerPC)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
604 (PowerPC)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
604e (PowerPC)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
750 aka as G3 (PowerPC)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-mcpu=750 -O3 -pipe -fomit-frame-pointer
-fsigned-char"
CXXFLAGS="-mcpu=750 -O3 -pipe -fomit-frame-pointer
-fsigned-char"
Note: do not use -march=
7400, aka G4 (PowerPC)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-mcpu=7400 -O3 -pipe -fomit-frame-pointer
-fsigned-char -maltivec"
CXXFLAGS="-mcpu=7400 -O3 -pipe -fomit-frame-pointer
-fsigned-char -maltivec"
Note: do not use -march=
7450, aka G4 second generation (PowerPC)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-mcpu=7450 -O3 -pipe -fomit-frame-pointer
-fsigned-char -maltivec"
CXXFLAGS="-mcpu=7450 -O3 -pipe -fomit-frame-pointer
-fsigned-char -maltivec"
Note: do not use -march=
PowerPC (If you don't know which one)
CHOST="powerpc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer -fsigned-char"
Sparc
CHOST="sparc-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer"
Sparc 64
CHOST="sparc64-unknown-linux-gnu"
CFLAGS="-O3 -pipe -fomit-frame-pointer"
CXXFLAGS="-O3 -pipe -fomit-frame-pointer"
|
|
| 网友：sd44 |
发表时间：2002-09-20 03:13:10 |
| |
非常漂亮的说
编译，安装成功后，环境变量如何设置呢？
是否可以再写篇文章 |
| |
| 网友：abc |
发表时间：2002-09-20 11:32:12 |
| |
| 这些东东GCC的手册上都有啊，而且写得一清二楚。 |
| |
| 网友：jieer |
发表时间：2002-09-20 16:40:37 |
| |
| 我试了一下，从1加到10000，不加上边提到的参数用了152毫秒，加参数用了50毫秒，乘法运算差异也很大 |
| |
| 网友：shixinzeng |
发表时间：2002-09-20 16:53:30 |
| |
| 楼上的兄弟,你说的时间指的是用两种方法编译的程序的执行时间? |
| |
| 网友：jieer |
发表时间：2002-09-21 13:11:03 |
| |
| 是的 |
| |
| 网友：good |
发表时间：2002-09-22 18:40:05 |
| |
| 循环怎么没有展开？ |
| |
| 网友：林青侠 |
发表时间：2002-09-23 12:09:24 |
| |
| 其实一个 CFLAGS=-O2 就差不多了 |
| |
|
|
|