HelpPC 2.10 Quick Reference Utility Copyright 1991 David Jurgens

                           Video Information Tables

       BIOS Data Area Fields

     Address   Size            Description

       40:49   byte    Current video mode  (see VIDEO MODE)
       40:4A   word    Number of screen columns
       40:4C   word    Size of video regen buffer in bytes
       40:4E   word    Starting address in video regen buffer (offset)
       40:50  8 words  Cursor position of pages 1-8, high order
                       byte=row, low order byte=column
       40:60   byte    Ending (bottom) scan line for cursor
       40:61   byte    Starting (top) scan line for cursor
       40:62   byte    Active display page number
       40:63   word    Base port address for active 6845 CRT controller
                       3B4h = mono, 3D4h = color
       40:65   byte    6845 CRT mode control register value (port 3x8h)
                       EGA/VGA values emulate those of the MDA/CGA
       40:66   byte    CGA current color palette setting (port 3d9h)
                       EGA and VGA values emulate the CGA
       40:84   byte    Rows on the screen (less 1, EGA+)
       40:85   word    Point height of character matrix (EGA+)
       40:87   byte    Video mode options (EGA+)

               │7│6│5│4│3│2│1│0│ Video mode options (EGA+)
                │ │ │ │ │ │ │ └── 1=alphanumeric cursor emulation enabled
                │ │ │ │ │ │ └─── 1=video subsystem attached to monochrome
                │ │ │ │ │ └──── reserved
                │ │ │ │ └───── 1=video subsystem is inactive
                │ │ │ └────── reserved
                │ └─┴─────── video RAM  00-64K  10-192K  01-128K  11-256K
                └────────── video mode number passed to INT 10, function 0

       40:88   byte    EGA feature bit switches, emulated on VGA

               │7│6│5│4│3│2│1│0│ EGA feature bit switches (EGA+)
                │ │ │ │ │ │ │ └── EGA SW1 config (1=off)
                │ │ │ │ │ │ └─── EGA SW2 config (1=off)
                │ │ │ │ │ └──── EGA SW3 config (1=off)
                │ │ │ │ └───── EGA SW4 config (1=off)
                │ │ │ └────── Input FEAT0 (ISR0 bit 5) after output on FCR0
                │ │ └─────── Input FEAT0 (ISR0 bit 6) after output on FCR0
                │ └──────── Input FEAT1 (ISR0 bit 5) after output on FCR1
                └───────── Input FEAT1 (ISR0 bit 6) after output on FCR1

       40:89   byte    Video display data area (MCGA and VGA)

               │7│6│5│4│3│2│1│0│ Video display data area (MCGA and VGA)
                │ │ │ │ │ │ │ └── 1=VGA is active
                │ │ │ │ │ │ └─── 1=gray scale is enabled
                │ │ │ │ │ └──── 1=using monochrome monitor
                │ │ │ │ └───── 1=default palette loading is disabled
                │ │ │ └────── see table below
                │ │ └─────── reserved
                │ └────────  1=display switching enabled
                └───────── alphanumeric scan lines (see table below)

               Bit7   Bit4     Scan Line information
                0      0       350 line mode
                0      1       400 line mode
                1      0       200 line mode
                1      1       reserved

       40:8A   byte    Display Combination Code (DCC) table index (EGA+)
       40:A8  dword    BIOS Video Save/Override Pointer Table address


                           EGA / VGA Related Tables

       Video Save/Override Pointer Table (pointer at 40:A8):

       00  dword  Video Parameter Table pointer
       04  dword  Dynamic Parameter Save Area pointer (EGA, VGA)
       08  dword  Alphanumeric Character Set Override pointer
       0C  dword  Graphics Character Set Override pointer
       10  dword  Secondary Save Pointer Table pointer (VGA)
       14  dword  reserved, set to 0000:0000
       18  dword  reserved, set to 0000:0000


       Video Parameter Table

       00   byte    number of displayed character columns
       01   byte    number of displayed screen rows minus 1
       02   byte    character matrix height in points
       03   word    video buffer size in bytes
       05   dword   contents of sequencer registers 1-4
       09   byte    misc. output register values
       0A  25bytes  contents of CRTC registers 0-18h
       23  20bytes  contents of attribute controller regs 0-13h
       37  9 bytes  contents of graphics controller regs 0-8


       Dynamic Parameter Save Area

       00  16bytes   contents of graphics controller pallette regs
       10    byte    contents of graphics controller overscan reg
       11  239bytes  reserved


       Alphanumeric Character Set Override

       00   byte    length of each character definition in bytes
       01   byte    character generator RAM bank
       02   word    count of characters defined
       04   word    first character code in table
       06   dword   pointer to character font definition table
       0A   byte    number of character rows displayed
       0B   nbytes  array of applicable video modes
       0B+n byte    FFh end of mode list marker


       Graphics Character Set Override

       00   byte    count of displayed character rows
       01   word    length of each character definition in bytes
       03   dword   pointer to character font definition table
       07   nbytes  array of applicable video modes
       07+n byte    FFh end of mode list marker


       Secondary Save Pointer Table

       00  word   length of table in bytes
       02  dword  pointer to display combination code table
       06  dword  pointer to secondary alphanumeric char set override
       0A  dword  pointer to user palette profile table  (VGA)
       0E  dword  reserved
       12  dword  reserved
       16  dword  reserved


       Display Combination Code Table

       00   byte   number of table entries
       01   byte   DCC table version number
       02   byte   maximum display type code
       03   byte   reserved
       04  n words array valid display combinations:

       0,0 entry  0  no display
       0,1 entry  1  MDPA
       0,2 entry  2  CGA
       2,1 entry  3  MDPA + CGA
       0,4 entry  4  EGA
       4,1 entry  5  EGA + MDPA
       0,5 entry  6  MEGA
       2,5 entry  7  MEGA + CGA
       0,6 entry  8  PGC
       1,6 entry  9  PGC + MDPA
       5,6 entry 10  PGC + MEGA
       0,8 entry 11  CVGA
       1,8 entry 12  CVGA + MDPA
       0,7 entry 13  MVGA
       2,7 entry 14  MVGA + CGA
       2,6 entry 15  MVGA + PGC


       Secondary Alpha Mode Auxillary Character Generator Table

       00   byte    bytes per character
       01   byte    block to load
       02   byte    reserved
       03   dword   font table pointer
       07   nbytes  array of mode values for this font
       07+n byte    FFh end of mode list marker


       Palette Profile Table (VGA only)

       00   byte    1 - enable underlining in all alphanumeric modes
                    0 - enable underlining in monochrome alpha modes
                   -1 - disable underlining in all alpha modes
       01   byte   reserved
       02   word   reserved
       04   word   count of attribute controller regs in table
       06   word   first attribute controller register number
       08   dword  pointer to attribute controller reg table
       0C   word   count of video DAC color registers in table
       0E   word   first video DAC color register number
       10   dword  video DAC color register table pointer
       14   nbytes array of applicable video modes for this font
       14+n byte   FFh end of video mode list marker


       - see also BIOS Data Area
       - see INT 10,1B for Dynamic Video State Table and Video Static
         Functionality Table

Esc or Alt-X to exit video information Home/PgUp/PgDn/End ←↑↓→