Connectivity supports communications over both dependent and independent Logical Units (LUs). This appendix contains sample configuration file excerpts (as produced by the HP-UX SNAplus configuration file print utility, snapshowcfg) that show how to configure both types of LUs. Additionally, an excerpt is included that illustrates the required configuration for a dynamically loadable TP, which is required if connections incoming to HP-UX are to be supported.
|
|
|
The following samples include excerpts for independent and dependent LUs and for a dynamically loadable TP.
|
|
|
The following are sample excerpts for independent LUs:
*****************************************************************
* APPC Local LU Record *
*****************************************************************
Local LU name ..................S1110000
Description ....................[LU for MVS DB2 access]
Owning local node name .........NODE
Network ID .....................[RTIBM]
Network name ...................S1110000
Session limit ..................64
Default LU? ....................No
Locally usable? ................No
LU number ......................0
Conversation-level security? ...No
Prevalidation ability? .........No
Number of remote LUs .......... 3
Remote LU #1:
Remote LU name ............... GCVDEV1
Number of modes .............. 1
List of mode IDs ............. 000
******************************************************************
* APPC Mode Data Record *
*****************************************************************
Mode name ................ INGLU62
Description .............. [INGLU62 mode for MVS]
Owning connection name ... [CONN1]
Mode ID .................. 000
High priority mode? ...... Yes
Session limit ............ 64
Auto activation limit .... 16
Min contention losers .... 32
Min contention winners ... 32
Send pacing count ........ 0
Receive pacing count ..... 0
Send RU size ............. 256 (min) to 4096 (max)
Receive RU size .......... 256 (min) to 4096 (max)
*****************************************************************
* APPC Remote LU Record *
*****************************************************************
LU alias .......................GCVDEV1
Description ....................[Remote LU for DB2 Gateway]
Network ID .....................RTIBM
Remote LU name .................C5X6ICS5
Prevalidation ability? .........No
Parallel sessions? .............Yes
Conversation-level security? ...No
Uninterpreted LU name ..........C5X6ICS5
|
|
|
The following are sample excerpts for dependent LUs:
*****************************************************************
* APPC Local LU Record *
*****************************************************************
Local LU name ..................S1110008
Description ....................[LU for MVS DB2 access]
Owning local node name .........NODE
Network ID .....................[RTIBM]
Network name ...................S1110008
Session limit ..................1
Default LU? ....................No
Locally usable? ................No
LU number ......................1
Conversation-level security? ...No
Prevalidation ability? .........No
Number of remote LUs ...........1
Remote LU #1:
Remote LU name ................GCVSDEV1
Number of modes ...............1
List of mode IDs ..............003
*****************************************************************
* APPC Mode Data Record *
*****************************************************************
Mode name ......................INGSLU62
Description ....................[INGLU62 mode for MVS]
Owning connection name .........[CONN1]
Mode ID ........................003
High priority mode? .......Yes
Session limit .............1
Auto activation limit .....0
Min contention losers .....0
Min contention winners ....1
Send pacing count .........0
Receive pacing count ......0
Send RU size ..............256 (min) to 4096 (max)
Receive RU size ...........256 (min) to 4096 (max)
******************************************************************
* APPC Remote LU Record *
******************************************************************
LU alias ..................... GCVSDEV1
Description .................. [Remote LU for DB2 Gateway]
Network ID ................... RTIBM
Remote LU name ............... C5X6ICS5
Prevalidation ability? ....... No
Parallel sessions? ........... No
Conversation-level security? . No
Uninterpreted LU name ........ C5X6ICS5
|
|
|
The following is a sample excerpt for a dynamically loadable TP to support Connectivity connections incoming to HP-UX. Note that the executable file specified is not used by "Queued - operator started" TPs, and that the "Receive allocate timeout" must be set to 0 seconds to avoid the Communications server blocking for incoming connections.
*****************************************************************
* Dynamically Loadable TP Record *
*****************************************************************
Local TP name ................. TEST
Description ................... [test invocable TP]
TP type ....................... APPC
Queueing scheme ............... Queued - operator started
Conversation security? ........ No
Accept already-verified? ...... No
Full TP name .................. test
Executable file ............... [junk]
Parameters .................... []
Environment string ............ []
Target machine name ........... []
Attach timeout ................. 3600 sec
Receive allocate timeout ....... 0 sec