fd(4) — Linux manual pages

Linux manual pages	Section 4

Name

fd — floppy disk device

CONFIGURATION

Floppy drives are block devices with major number 2. Typically they are owned by root.floppy (i.e., user root, group floppy) and have either mode 0660 (access checking via group membership) or mode 0666 (everybody has access). The minor numbers encode the device type, drive number, and controller number. For each device type (that is, combination of density and track count) there is a base minor number. To this base number, add the drive's number on its controller and 128 if the drive is on the secondary controller. In the following device tables, n represents the drive number.

If you use formats with more tracks than supported by your drive, you may cause it mechanical damage. Trying once if more tracks than the usual 40/80 are supported should not damage it, but no warranty is given for that. Don't create device entries for those formats to prevent their usage if you are not sure.

Drive independent device files which automatically detect the media format and capacity:

Name	Base minor #
`fd``n`	0

5.25 inch double density device files:

Name	Capac.	Cyl.	Sect.	Heads	Base minor #
`fd``n``d360`	360K	40	9	2	4

5.25 inch high density device files:

Name	Capac.	Cyl.	Sect.	Heads	Base minor #
`fd``n``h360`	360K	40	9	2	20
`fd``n``h410`	410K	41	10	2	48
`fd``n``h420`	420K	42	10	2	64
`fd``n``h720`	720K	80	9	2	24
`fd``n``h880`	880K	80	11	2	80
`fd``n``h1200`	1200K	80	15	2	8
`fd``n``h1440`	1440K	80	18	2	40
`fd``n``h1476`	1476K	82	18	2	56
`fd``n``h1494`	1494K	83	18	2	72
`fd``n``h1600`	1600K	80	20	2	92

3.5 inch double density device files:

Name	Capac.	Cyl.	Sect.	Heads	Base minor #
`fd``n``D360`	360K	80	9	1	12
`fd``n``D720`	720K	80	9	2	16
`fd``n``D800`	800K	80	10	2	120
`fd``n``D1040`	1040K	80	13	2	84
`fd``n``D1120`	1120K	80	14	2	88

3.5 inch high density device files:

Name	Capac.	Cyl.	Sect.	Heads	Base minor #
`fd``n``H360`	360K	40	9	2	12
`fd``n``H720`	720K	80	9	2	16
`fd``n``H820`	820K	82	10	2	52
`fd``n``H830`	830K	83	10	2	68
`fd``n``H1440`	1440K	80	18	2	28
`fd``n``H1600`	1600K	80	20	2	124
`fd``n``H1680`	1680K	80	21	2	44
`fd``n``H1722`	1722K	82	21	2	60
`fd``n``H1743`	1743K	83	21	2	76
`fd``n``H1760`	1760K	80	22	2	96
`fd``n``H1840`	1840K	80	23	2	116
`fd``n``H1920`	1920K	80	24	2	100

3.5 inch extra density device files:

Name	Capac.	Cyl.	Sect.	Heads	Base minor #
`fd``n``E2880`	2880K	80	36	2	32
`fd``n``CompaQ`	2880K	80	36	2	36
`fd``n``E3200`	3200K	80	40	2	104
`fd``n``E3520`	3520K	80	44	2	108
`fd``n``E3840`	3840K	80	48	2	112

DESCRIPTION

fd special files access the floppy disk drives in raw mode. The following ioctl(2) calls are supported by fd devices:

FDCLRPRM: clears the media information of a drive (geometry of disk in drive).
FDSETPRM: sets the media information of a drive. The media information will be lost when the media is changed.
FDDEFPRM: sets the media information of a drive (geometry of disk in drive). The media information will not be lost when the media is changed. This will disable autodetection. In order to reenable autodetection, you have to issue an FDCLRPRM.
FDGETDRVTYP: returns the type of a drive (name parameter). For formats which work in several drive types, FDGETDRVTYP returns a name which is appropriate for the oldest drive type which supports this format.
FDFLUSH: invalidates the buffer cache for the given drive.
FDSETMAXERRS: sets the error thresholds for reporting errors, aborting the operation, recalibrating, resetting, and reading sector by sector.
FDSETMAXERRS: gets the current error thresholds.
FDGETDRVTYP: gets the internal name of the drive.
FDWERRORCLR: clears the write error statistics.
FDWERRORGET: reads the write error statistics. These include the total number of write errors, the location and disk of the first write error, and the location and disk of the last write error. Disks are identified by a generation number which is incremented at (almost) each disk change.
FDTWADDLE: Switch the drive motor off for a few microseconds. This might be needed in order to access a disk whose sectors are too close together.
FDSETDRVPRM: sets various drive parameters.
FDGETDRVPRM: reads these parameters back.
FDGETDRVSTAT: gets the cached drive state (disk changed, write protected et al.)
FDPOLLDRVSTAT: polls the drive and return its state.
FDGETFDCSTAT: gets the floppy controller state.
FDRESET: resets the floppy controller under certain conditions.
FDRAWCMD: sends a raw command to the floppy controller.

For more precise information, consult also the <linux/fd.h> and <linux/fdreg.h> include files, as well as the manual page for floppycontrol.

FILES

/dev/fd*

NOTES

The various formats allow to read and write many types of disks. However, if a floppy is formatted with a too small inter sector gap, performance may drop, up to needing a few seconds to access an entire track. To prevent this, use interleaved formats. It is not possible to read floppies which are formatted using GCR (group code recording), which is used by Apple II and Macintosh computers (800k disks). Reading floppies which are hard sectored (one hole per sector, with the index hole being a little skewed) is not supported. This used to be common with older 8 inch floppies.

COLOPHON

This page is part of release 3.24 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.

t
Copyright (c) 1993 Michael Haardt (michaelcantor.informatik.rwth-aachen.de)
and 1994,1995 Alain Knaff (Alain.Knaffimag.fr)

This is free documentation; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.

The GNU General Public License's references to "object code"
and "executables" are to be interpreted as the output of any
document formatting or typesetting system, including
intermediate and printed output.

This manual is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public
License along with this manual; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111,
USA.

Modified, Sun Feb 26 15:00:02 1995, faithcs.unc.edu