The commands modload(1M), modunload(1M), and modinfo(1M) can be used to add test modules, which is a useful technique for debugging and stress-testing drivers. These commands are generally not needed in normal operation, because the kernel automatically loads needed modules and unloads unused modules. The moddebug kernel variable works with these commands to provide information and set controls.
Use modload(1M) to force a module into memory. The modload command verifies that the driver has no unresolved references when that driver is loaded. Loading a driver does not necessarily mean that the driver can attach. When a driver loads successfully, the driver's _info(9E) entry point is called. The attach() entry point is not necessarily called.
Use modinfo(1M) to confirm that the driver is loaded.
$ modinfo Id Loadaddr Size Info Rev Module Name 6 101b6000 732 - 1 obpsym (OBP symbol callbacks) 7 101b65bd 1acd0 226 1 rpcmod (RPC syscall) 7 101b65bd 1acd0 226 1 rpcmod (32-bit RPC syscall) 7 101b65bd 1acd0 1 1 rpcmod (rpc interface str mod) 8 101ce8dd 74600 0 1 ip (IP STREAMS module) 8 101ce8dd 74600 3 1 ip (IP STREAMS device) ... $ modinfo | grep mydriver 169 781a8d78 13fb 0 1 mydriver (Test Driver 1.5) |
The number in the info field is the major number that has been chosen for the driver. The modunload(1M) command can be used to unload a module if the module ID is provided. The module ID is found in the left column of modinfo output.
Sometimes a driver does not unload as expected after a modunload is issued, because the driver is determined to be busy. This situation occurs when the driver fails detach(9E), either because the driver really is busy, or because the detach entry point is implemented incorrectly.
To remove all of the currently unused modules from memory, run modunload(1M) with a module ID of 0:
# modunload -i 0 |
The moddebug kernel variable controls the module loading process. The possible values of moddebug are:
Prints messages to the console when loading or unloading modules.
Gives more detailed error messages.
Prints more detail when loading or unloading, such as including the address and size.
No auto-unloading drivers. The system does not attempt to unload the device driver when the system resources become low.
No auto-unloading streams. The system does not attempt to unload the STREAMS module when the system resources become low.
No auto-unloading of kernel modules of any type.
If running with kmdb, moddebug causes a breakpoint to be executed and a return to kmdb immediately before each module's _init() routine is called. This setting also generates additional debug messages when the module's _info() and _fini() routines are executed.