Windows 系统下的安装
PHP Manual

Microsoft IIS 7.0 and later

This section contains instructions for manually setting up Internet Information Services (IIS) 7.0 and later to work with PHP on Microsoft Windows Vista SP1, Windows 7, Windows Server 2008 and Windows Server 2008 R2. For instructions on setting up IIS 5.1 and IIS 6.0 on Windows XP and Windows Server 2003 refer to Microsoft IIS 5.1 and IIS 6.0.

Enabling FastCGI support in IIS

FastCGI module is disabled in default installation of IIS. The steps to enable it differ based on the version of Windows being used.

To enable FastCGI support on Windows Vista SP1 and Windows 7:

  1. In the Windows Start Menu choose "Run:", type "optionalfeatures.exe" and click "Ok";

  2. In the "Windows Features" dialog expand "Internet Information Services", "World Wide Web Services", "Application Development Features" and then enable the "CGI" checkbox;

  3. Click OK and wait until the installation is complete.

Enabling FastCGI support for IIS7 on Windows Vista SP1 and Windows 7

To enable FastCGI support on Windows Server 2008 and Windows Server 2008 R2:

  1. In the Windows Start Menu choose "Run:", type "CompMgmtLauncher" and click "Ok";

  2. If the "Web Server (IIS)" role is not present under the "Roles" node, then add it by clicking "Add Roles";

  3. If the "Web Server (IIS)" role is present, then click "Add Role Services" and then enable the "CGI" checkbox under "Application Development" group;

  4. Click "Next" and then "Install" and wait for the installation to complete.

Enabling FastCGI support on Windows Server 2008 and Windows Server 2008 R2

Configuring IIS to process PHP requests

Download and install PHP in accordance to the instructions described in manual installation steps

Note:

Non-thread-safe build of PHP is recommended when using IIS. The non-thread-safe builds are available at » PHP for Windows: Binaries and Sources Releases.

Configure the CGI- and FastCGI-specific settings in php.ini file as shown below:

Example #1 CGI and FastCGI settings in php.ini

fastcgi.impersonate = 1
fastcgi.logging = 0
cgi.fix_pathinfo=1
cgi.force_redirect = 0

Configure IIS handler mapping for PHP by using either IIS Manager user interface or a command line tool.

Using IIS Manager user interface to create a handler mapping for PHP

Follow these steps to create an IIS handler mapping for PHP in IIS Manager user interface:

  1. In the Windows Start Menu choose "Run:", type "inetmgr" and click "Ok";

  2. In the IIS Manager user interface select the server node in the "Connections" tree view;

  3. In the "Features View" page open the "Handler Mappings" feature;

    Create IIS handler mapping for PHP : Locate Handler Mappings

  4. In the "Actions" pane click "Add Module Mapping...";

  5. In the "Add Module Mapping" dialog enter the following:

    • Request path: *.php
    • Module: FastCgiModule
    • Executable: C:\[Path to PHP installation]\php-cgi.exe
    • Name: PHP_via_FastCGI

  6. Click "Request Restrictions" button and then configure the mapping to invoke handler only if request is mapped to a file or a folder;

  7. Click OK on all the dialogs to save the configuration.

Create IIS handler mapping for PHP : Add Handler Mapping

Using command line tool to create a handler mapping for PHP

Use the command shown below to create an IIS FastCGI process pool which will use php-cgi.exe executable for processing PHP requests. Replace the value of the fullPath parameter with the absolute file path to the php-cgi.exe file.

Example #2 Creating IIS FastCGI process pool

%windir%\system32\inetsrv\appcmd set config /section:system.webServer/fastCGI ^
/+[fullPath='c:\PHP\php-cgi.exe']

Configure IIS to handle PHP specific requests by running the command shown below. Replace the value of the scriptProcessor parameter with the absolute file path to the php-cgi.exe file.

Example #3 Creating handler mapping for PHP requests

%windir%\system32\inetsrv\appcmd set config /section:system.webServer/handlers ^
/+[name='PHP_via_FastCGI', path='*.php',verb='*',modules='FastCgiModule',^
scriptProcessor='c:\PHP\php-cgi.exe',resourceType='Either']

This command creates an IIS handler mapping for *.php file extension, which will result in all URLs that end with .php being handled by FastCGI module.

Note:

At this point the required installation and configuration steps are completed. The remaining instructions below are optional but highly recommended for achieving optimal functionality and performance of PHP on IIS.

Impersonation and file system access

It is recommended to enable FastCGI impersonation in PHP when using IIS. This is controlled by the fastcgi.impersonate directive in php.ini file. When impersonation is enabled, PHP will perform all the file system operations on behalf of the user account that has been determined by IIS authentication. This ensures that even if the same PHP process is shared across different IIS web sites, the PHP scripts in those web sites will not be able to access each other's files as long as different user accounts are used for IIS authentication on each web site.

For example IIS 7, in its default configuration, has anonymous authentication enabled with built-in user account IUSR used as a default identity. This means that in order for IIS to execute PHP scripts, it is necessary to grant IUSR account read permission on those scripts. If PHP applications need to perform write operations on certain files or write files into some folders then IUSR account should have write permission to those.

To determine what user account is used as an anonymous identity in IIS 7 use the following command. Replace the "Default Web Site" with the name of IIS web site that you use. In the output XML configuration element look for the userName attribute.

Example #4 Determining the account used as IIS anonymous identity

%windir%\system32\inetsrv\appcmd.exe list config "Default Web Site" ^
/section:anonymousAuthentication

<system.webServer>
  <security>
    <authentication>
      <anonymousAuthentication enabled="true" userName="IUSR" />
    </authentication>
   </security>
</system.webServer>

Note:

If userName attribute is not present in the anonymousAuthentication element, or is set to an empty string, then it means that the application pool identity is used as an anonymous identity for that web site.

To modify the permissions settings on files and folders, use the Windows Explorer user interface or icacls command.

Example #5 Configuring file access permissions

icacls C:\inetpub\wwwroot\upload /grant IUSR:(OI)(CI)(M)

Set index.php as a default document in IIS

The IIS default documents are used for HTTP requests that do not specify a document name. With PHP applications, index.php usually acts as a default document. To add index.php to the list of IIS default documents, use this command:

Example #6 Set index.php as a default document in IIS

%windir%\system32\inetsrv\appcmd.exe set config ^
-section:system.webServer/defaultDocument /+"files.[value='index.php']" ^
/commit:apphost

FastCGI and PHP Recycling configuration

Configure IIS FastCGI settings for recycling of PHP processes by using the commands shown below. The FastCGI setting instanceMaxRequests controls how many requests will be processed by a single php-cgi.exe process before IIS shuts it down. The PHP environment variable PHP_FCGI_MAX_REQUESTS controls how many requests a single php-cgi.exe process will handle before it recycles itself. Make sure that the value specified for FastCGI InstanceMaxRequests setting is less than or equal to the value specified for PHP_FCGI_MAX_REQUESTS.

Example #7 Configuring FastCGI and PHP recycling

%windir%\system32\inetsrv\appcmd.exe set config -section:system.webServer/fastCgi ^
/[fullPath='c:\php\php-cgi.exe'].instanceMaxRequests:10000

%windir%\system32\inetsrv\appcmd.exe set config -section:system.webServer/fastCgi ^
/+"[fullPath='C:\{php_folder}\php-cgi.exe'].environmentVariables.^
[name='PHP_FCGI_MAX_REQUESTS',value='10000']"

FastCGI timeout settings

Increase the timeout settings for FastCGI if it is expected to have long running PHP scripts. The two settings that control timeouts are activityTimeout and requestTimeout. Use the commands below to change the timeout settings. Make sure to replace the value in the fullPath parameter to contain the absolute path to the php-cgi.exe file.

Example #8 Configuring FastCGI timeout settings

%windir%\system32\inetsrv\appcmd.exe set config -section:system.webServer/fastCgi ^
/[fullPath='C:\php\php-cgi.exe',arguments=''].activityTimeout:"90"  /commit:apphost

%windir%\system32\inetsrv\appcmd.exe set config -section:system.webServer/fastCgi ^
/[fullPath='C:\php\php-cgi.exe',arguments=''].requestTimeout:"90"  /commit:apphost

Changing the Location of php.ini file

PHP searches for php.ini file in several locations and it is possible to change the default locations of php.ini file by using PHPRC environment variable. To instruct PHP to load the configuration file from a custom location run the command shown below. The absolute path to the directory with php.ini file should be specified as a value of PHPRC environment variable.

Example #9 Changing the location of php.ini file

appcmd.exe set config  -section:system.webServer/fastCgi ^
/+"[fullPath='C:\php\php.exe',arguments=''].environmentVariables.^
[name='PHPRC',value='C:\Some\Directory\']" /commit:apphost


Windows 系统下的安装
PHP Manual