ETEL.H Global variables

const TUint KEtelMajorVersionNumber;

Description

Major version number.

const TUint KEtelMinorVersionNumber;

Description

Minor version number.

const TUint KEtelBuildVersionNumber;

Description

Build number.

const TInt KErrEtelCoreBase;

Description

const TInt KErrEtelNotCallOwner;

Description

The client is not the call owner and has attempted to perform an operation that requires ownership.

const TInt KErrEtelDuplicatePhoneName;

Description

An attempt has been made to load an ETel (TSY) module which contains a phone with the same name as one already loaded.

const TInt KErrEtelAlreadyCallOwner;

Description

An attempt has been made to acquire call ownership when the requesting client is already the call owner.

const TInt KErrEtelNoCarrier;

Description

A connection has been terminated because the carrier has been lost.

const TInt KErrEtelBusyDetected;

Description

An attempt to establish a connection with the RCall::Dial() function has failed because the remote party's line was busy.

const TInt KErrEtelNoClientInterestedInThisCall;

Description

An attempt has been made to transfer call ownership, but no other clients are interested in acquiring ownership.

const TInt KErrEtelInitialisationFailure;

Description

The TSY has failed to initialise the modem. This may be occur if the modem is disconnected during initialisation, or if an attempt is made to initialise an unsupported modem.

const TInt KErrEtelCallNotActive;

Description

An attempt has been made to perform an operation which requires the call to be connected - when the call is not connected. E.g. RCall:LoanDataPort().

const TInt KErrEtelNoAnswer;

Description

A connection request has failed because there is no answer.

const TInt KErrEtelNoDialTone;

Description

A connection request has failed because there is no dial tone. For example, if there is no connection between the modem and the network.

const TInt KErrEtelConfigPortFailure;

Description

An attempt to configure the port has failed because the hardware cannot match the desired configuration. For example, if an attempt is made to configure the comms port to a baud rate it cannot support.

const TInt KErrEtelFaxChunkNotCreated;

Description

Out of memory error - global chunk cannot be created.

const TInt KErrEtelNotFaxOwner;

Description

The client is not the fax owner and has attempted to perform an operation that requires fax ownership.

The fax client should be used to access fax functionality. Consequently, client code should not return this error.

const TInt KErrEtelPortNotLoanedToClient;

Description

An attempt has been made to perform an operation which requires port ownership. However, the client does not own the port.

const TInt KErrEtelWrongModemType;

Description

An operation has failed because the modem has been incorrectly configured.

const TInt KErrEtelUnknownModemCapability;

Description

An operation has failed because the modem does not understand the request - possible bug in modem.

const TInt KErrEtelAnswerAlreadyOutstanding;

Description

The call has already placed an 'answer incoming call' request. Only 1 request of a type (e.g. fax, voice, data) can be outstanding on the server at a time.

const TInt KErrEtelModemNotDetected;

Description

An attempt to establish a connection with the modem has failed because the modem cannot be detected.

const TInt KErrEtelModemSettingsCorrupt;

Description

Operation failed because the modem settings are corrupt.

const TInt KErrEtelPortAlreadyLoaned;

Description

The Data port is in use by another call or application.

const TInt KErrEtelCallAlreadyActive;

Description

Another call active. Close it before opening a new one.