|
||
Use of sound is one of several ways that the Alarm Server notifies the user. By configuring sound the Alarm Server is able to:
silence all alarms
(RASCliSession::SetAlarmSoundState()
) - the current alarm
sound is silenced. No sound is played when an alarm expires
silence all alarms until a specific time
(RASCliSession::SetAlarmSoundsSilentUntil()
) - the sound
playing is silenced until a specific time. No sound is played for any alarms
notifying before this time
silence all alarms for a specified period
(RASCliSession::SetAlarmSoundsSilentFor()
). This silences
the current sound for a given amount of time. No sound is played for any alarms
notifying during this period
cancel alarm silence
(RASCliSession::CancelAlarmSilence()
) - if the current
alarm sound has been silenced, this cancels the silent state
configure alarm sound play intervals
(RASCliSession::SetAlarmPlayIntervalsL()
). This updates
sound play intervals, which specify the duration of the ‘play / silence /
play’, when an alarm expires
determine whether alarm sound playing is temporarily silenced
(RASCliSession::AlarmSoundsTemporarilySilenced()
). This
returns ETrue
if alarm sound playing is temporarily
silenced, otherwise EFalse
is specified.
The sound play definition
(TASCliSoundPlayDefinition
) is set using the
RASCliSession
class. Alarm sounds are played according to
intervals that consist of a duration and an offset. The
TASCliSoundPlayDefinition
class defines when alarm sounds
are to be played, and for how long. The duration is the number of seconds that
the alarm sound plays. The offset is the number of minutes after the alarm
expires that the alarm sound plays.
As shown below, alarm play intervals consist of a duration and an onset. At each offset, the Alarm Server makes a request to the Alarm Alert Server to show the alarm and play the alarm sound. At the end of each duration period, the Alarm Server makes a request to the Alarm Alert Server to hide the alarm and stop playing the alarm sound.