How to set up a 6-Bone connection

     zebra configuration
     ===================
     !
     ! Actually there is no need to configure zebra
     !
     
     bgpd configuration
     ==================
     !
     ! This means that routes go through zebra and into the kernel.
     !
     router zebra
     !
     ! MP-BGP configuration
     !
     router bgp 7675
      bgp router-id 10.0.0.1
      neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 remote-as as-number
     !
      address-family ipv6
      network 3ffe:506::/32
      neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 activate
      neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 route-map set-nexthop out
      neighbor 3ffe:1cfa:0:2:2c0:4fff:fe68:a231 remote-as as-number
      neighbor 3ffe:1cfa:0:2:2c0:4fff:fe68:a231 route-map set-nexthop out
      exit-address-family
     !
     ipv6 access-list all permit any
     !
     ! Set output nexthop address.
     !
     route-map set-nexthop permit 10
      match ipv6 address all
      set ipv6 nexthop global 3ffe:1cfa:0:2:2c0:4fff:fe68:a225
      set ipv6 nexthop local fe80::2c0:4fff:fe68:a225
     !
     ! logfile FILENAME is obsolete.  Please use log file FILENAME
     !
     log file bgpd.log
     !