Administration Guide

  • Docs Home
  • Community Home
3. Forwarding Syslog Messages from a Cisco CatOS Switch
Prev Appendix C. Syslog Device Preparation Next

3. Forwarding Syslog Messages from a Cisco CatOS Switch

  1. Log on to the target switch.

  2. Type the command enable at the prompt.

  3. Once you are prompted for a password, enter the correct password.

  4. Set the Syslog forwarding mechanism. See example below:

    set logging server <IP address of the Zenoss server>

  5. You can set the types of logging information that you want the switch to provide with the commands below as examples:

    set logging level mgmt 7 default
set logging level sys 7 default
set logging level filesys 7 default
Prev Up Next
2. Forwarding Syslog Messages from a Cisco IOS Router Home 4. Forwarding Syslog Messages using Syslog-ng