HomeApache Geronimo v1.1 > Documentation > Apache Geronimo v1.1 - User's Guide > Administration > Administrative tasks > Configuring security > Administering security realms > LDAP Realm

A guide to deploying LDAP realms in Geronimo. The samples reflect settings that are valid for the default ApacheDS setup.

ApacheDS

Geronimo can be configured to use the Apache Directory Server for its directory service. As of Geronimo 1.1 ApacheDS is not installed by default.

Deploying ApacheDS to Geronimo

To set up ApacheDS in Geronimo install the plugin as follows:

  1. Log into the Geronimo Console
  2. Click on Create/Install under the Plugins folder.
  3. If there are no repositories in the list click the Update Repository List link.
  4. Select a Repository to search.
  5. Click the Search for Plugins button.
  6. In the list select Apache Directory 0.92 for Geronimo (1.1)
  7. Click the Continue button on the next page.
  8. Click the Install Plugin button on the next page.
    All the needed components will be download and, if successful, you will see a message indicating that the plugin was installed.
  9. Click the Start button to start ApacheDS

Deploying LDAP Realms

Using the Security Realms Portlet

LDAP Security Realms can be deployed easily from within the Geronimo Console using the Security Realms portlet.

From the Security Realms portlet:

  1. Click Add new security realm
  2. Name the realm and select LDAP Realm in the Realm Type box and then click Next
    At this point you are presented with a list of the LDAP Login Module's settings (see Ldap Login Module Configuration)
  3. Enter settings corresponding to your LDAP configuration and click Next
  4. Select Advanced Settings as desired.
  5. To verify the settings are correct click Test a Login
  6. Enter a known username and password then click Next
    If the settings are correct you will see a page displaying the the Principles retrieved for the user.
  7. Click Deploy Realm
    The LDAP realm is ready for use and should be listed in your Security Realms portlet view.

Using the Command Line Deployer

An LDAP Realm can also be deployed from the command line using the Deployer tool. The configuration options are set in the first ldap-login gbean in the sample file. For configuration option details see LDAP Login Module Configuration.

To deploy the ldap-realm.xml run the following command from the <geronimo_home>/bin directory:

java -jar deployer.jar --user system --password manager deploy <ldap_home>/<filename>.xml

Once deployed you should see a confirmation message similar to the following example:

E:\geronimo\bin>java -jar deployer.jar --user system --password manager deploy e:/ldap-jetty/ldap-realm.xml
Deployed <groupId>/<artifactId>/<version>/car

LDAP Deployment XML Example

The following XML example uses parameters that are valid for the default ApacheDS server setup.

LDAP Deployment XML Example
<?xml version="1.0" encoding="UTF-8"?>
<module xmlns="http://geronimo.apache.org/xml/ns/deployment-1.1">
	<environment>
		<moduleId>
			<groupId>groupId</groupId>
			<artifactId>artifactId</artifactId>
			<version>1.0</version>
		</moduleId>
		<dependencies>
			<dependency>
				<groupId>geronimo</groupId>
				<artifactId>j2ee-security</artifactId>
				<version>1.1</version>
				<type>car</type>
			</dependency>
		</dependencies>
	</environment>
	
	<gbean name="ldap-login"
		class="org.apache.geronimo.security.jaas.LoginModuleGBean">
		<attribute name="loginModuleClass">org.apache.geronimo.security.realm.providers.LDAPLoginModule</attribute>
		<attribute name="serverSide">true</attribute>
		<attribute name="options">
			initialContextFactory=com.sun.jndi.ldap.LdapCtxFactory
                        connectionURL=ldap://localhost:1389
                        connectionUsername=uid=admin,ou=system
                        connectionPassword=secret
                        connectionProtocol=
                        authentication=simple
                        userBase=ou=users,ou=system
                        userSearchMatching=uid={0}
                        userSearchSubtree=false
                        roleBase=ou=groups,ou=system
                        roleName=cn
                        roleSearchMatching=(uniqueMember={0})
                        roleSearchSubtree=false
                        userRoleName=
		</attribute>
		<attribute name="loginDomainName">ldap-realm</attribute>
	</gbean>
	
	<gbean name="ldap-realm" class="org.apache.geronimo.security.realm.GenericSecurityRealm">
		<attribute name="realmName">ldap-realm</attribute>
		<reference name="LoginModuleConfiguration">
			<name>ldap-login</name>
		</reference>
		<reference name="ServerInfo">
			<name>ServerInfo</name>
		</reference>
		
		<reference name="LoginService">
			<name>JaasLoginService</name>
		</reference>
	</gbean>
	
	<gbean name="ldap-login" class="org.apache.geronimo.security.jaas.JaasLoginModuleUse">
		<attribute name="controlFlag">REQUIRED</attribute>
		<reference name="LoginModule">
			<name>ldap-login</name>
		</reference>
	</gbean>
</module>

LDAPLoginModule Configuration

The following section is a reference for users needing to deploy custom LDAP realms and outlines the LDAP Login Module configuration parameters as well as different possible configurations for retrieving LDAP user roles.

Tip: The key to working with the LDAP module is: KNOW YOUR LDAP SCHEMA.

LDAPLoginModule Options

Option Description
initialContextFactory The class name of the initial context factory. Usually com.sun.jndi.ldap.LdapCtxFactory.
connectionURL The LDAP connection URL, such as ldap://localhost:1389 . Note that the usual LDAP port is 389.
connectionUsername The DN used by the login module itself for authentication to the directory server.
connectionPassword The credential (password) that is used by the login module to authenticate itself to the directory server.
connectionProtocol The security protocol to use. This value is determined by the service provider. This can be left blank. An example would be SSL.
authentication The security level to use. Its value is one of the following strings: "none", "simple", "strong". If this property is unspecified the behavior is determined by the service provider.
userBase The base DN for the group membership search.
userSearchMatching The filter specification for how to search for user entries. RFC 2254 filters are allowed. In addition you can pass a parameter to the search filter instead of the literal value. For example: this is RFC 2254 filter spec: (cn=Babs Jensen). If you want to parameterize the value of the CN attribute type, specify (cn = {0}). This integer refers to the parameter number. Parameter value is the user name. This query must return exactly one object.
userSearchSubtree Defines the directory search scope for user entries. If set to true, the directory search scope is SUBTREE, if set to false, the directory search scope is ONE-LEVEL.
roleBase The base DN for the group membership search.
roleName The LDAP attribute that identifies the group name in the entry returned from the group membership search. Note that group membership query is defined by the roleSearchMatching parameter. Often group name parameter is cn.
roleSearchMatching The filter specification for how to search for roles. RFC 2254 filters are allowed. In addition you can pass parameters to the search filter instead of the literal value. For example: (uniqueMember = {0}). This integer refers to the parameter number. This parameter is the DN of the authenticated user. Note that if role membership for the user is defined in the member-of-like attribute (see userRoleName parameter) you may not need to search for group membership with the query.
roleSearchSubtree Defines the directory search scope for roles. If set to true, the directory search scope is SUBTREE, if set to false, the directory search scope is ONE-LEVEL.
userRoleName The group membership attribute of a user entry. Different LDAP schemas represent user group membership in different ways. Examples are: memberOf, isMemberOf, member, etc. Values of these attributes are identifiers of groups that a user is a member of. For example, if you have: memberOf: cn=admin,ou=groups,dc=foo, specify memberOf as the value for the userRoleName attribute. Be aware of the relationship between this parameter and roleSearchMatching query. Often times they will return the same data.

Retrieving LDAP User Roles

The LDAPLoginModule can be configured to find user roles (group memberships) using two different methods:

Find the roles using a group entry's attribute that contains user members (e.g. a member attribute).

To use this method the roleName and roleSearchMatching options must be set. The LDAPLoginModule will perform an LDAP search using the roleSearchMatching filter to search for the authenticating user's distinguished name within each group entry's roleName attribute. To skip this method the roleName option MUST be left unset. If the roleName option is set and the roleSearchMatching option is left unset then the LDAPLoginModule will attempt to perform the search and throw an exception.

. Find the roles using a user entry's attribute that contains the groups a user is a member of (e.g. a memberOf attribute).

To use this method the userRoleName option must be set with the name of the user entry's attribute that contains the group membership list. To skip this method the userRoleName should be unset.