Header And Logo
|
#include "postgres_fe.h"#include "mainloop.h"#include "command.h"#include "common.h"#include "input.h"#include "settings.h"#include "mb/pg_wchar.h"#include "psqlscan.c"
Go to the source code of this file.
Functions | |
| int | MainLoop (FILE *source) |
| int MainLoop | ( | FILE * | source | ) |
Definition at line 28 of file mainloop.c.
References _, appendPQExpBufferChar(), appendPQExpBufferStr(), cancel_pressed, createPQExpBuffer(), _psqlSettings::cur_cmd_interactive, _psqlSettings::cur_cmd_source, PQExpBufferData::data, _psqlSettings::db, destroyPQExpBuffer(), _psqlSettings::echo, _psqlSettings::encoding, EXIT_FAILURE, EXIT_SUCCESS, free, get_prompt(), gets_fromFile(), gets_interactive(), GetVariableNum(), HandleSlashCmds(), PQExpBufferData::len, _psqlSettings::lineno, memmove, _psqlSettings::notty, NULL, _psqlSettings::on_error_stop, pg_append_history(), pg_send_history(), pg_strdup(), pg_strncasecmp(), PG_UTF8, PQExpBufferBroken, _psqlSettings::progname, PSCAN_BACKSLASH, PSCAN_EOL, PSCAN_INCOMPLETE, PSCAN_SEMICOLON, pset, PSQL_CMD_NEWEDIT, PSQL_CMD_SEND, PSQL_CMD_TERMINATE, PSQL_ECHO_ALL, psql_error(), psql_scan(), psql_scan_create(), psql_scan_destroy(), psql_scan_finish(), psql_scan_in_quote(), psql_scan_reset(), psql_scan_setup(), _psqlSettings::quiet, resetPQExpBuffer(), SendQuery(), sigint_interrupt_enabled, sigint_interrupt_jmp, sigsetjmp, _psqlSettings::singleline, and _psqlSettings::vars.
Referenced by main(), and process_file().
{
PsqlScanState scan_state; /* lexer working state */
volatile PQExpBuffer query_buf; /* buffer for query being accumulated */
volatile PQExpBuffer previous_buf; /* if there isn't anything in the new
* buffer yet, use this one for \e,
* etc. */
PQExpBuffer history_buf; /* earlier lines of a multi-line command, not
* yet saved to readline history */
char *line; /* current line of input */
int added_nl_pos;
bool success;
bool line_saved_in_history;
volatile int successResult = EXIT_SUCCESS;
volatile backslashResult slashCmdStatus = PSQL_CMD_UNKNOWN;
volatile promptStatus_t prompt_status = PROMPT_READY;
volatile int count_eof = 0;
volatile bool die_on_error = false;
/* Save the prior command source */
FILE *prev_cmd_source;
bool prev_cmd_interactive;
uint64 prev_lineno;
/* Save old settings */
prev_cmd_source = pset.cur_cmd_source;
prev_cmd_interactive = pset.cur_cmd_interactive;
prev_lineno = pset.lineno;
/* Establish new source */
pset.cur_cmd_source = source;
pset.cur_cmd_interactive = ((source == stdin) && !pset.notty);
pset.lineno = 0;
/* Create working state */
scan_state = psql_scan_create();
query_buf = createPQExpBuffer();
previous_buf = createPQExpBuffer();
history_buf = createPQExpBuffer();
if (PQExpBufferBroken(query_buf) ||
PQExpBufferBroken(previous_buf) ||
PQExpBufferBroken(history_buf))
{
psql_error("out of memory\n");
exit(EXIT_FAILURE);
}
/* main loop to get queries and execute them */
while (successResult == EXIT_SUCCESS)
{
/*
* Clean up after a previous Control-C
*/
if (cancel_pressed)
{
if (!pset.cur_cmd_interactive)
{
/*
* You get here if you stopped a script with Ctrl-C.
*/
successResult = EXIT_USER;
break;
}
cancel_pressed = false;
}
/*
* Establish longjmp destination for exiting from wait-for-input. We
* must re-do this each time through the loop for safety, since the
* jmpbuf might get changed during command execution.
*/
if (sigsetjmp(sigint_interrupt_jmp, 1) != 0)
{
/* got here with longjmp */
/* reset parsing state */
psql_scan_finish(scan_state);
psql_scan_reset(scan_state);
resetPQExpBuffer(query_buf);
resetPQExpBuffer(history_buf);
count_eof = 0;
slashCmdStatus = PSQL_CMD_UNKNOWN;
prompt_status = PROMPT_READY;
cancel_pressed = false;
if (pset.cur_cmd_interactive)
putc('\n', stdout);
else
{
successResult = EXIT_USER;
break;
}
}
fflush(stdout);
/*
* get another line
*/
if (pset.cur_cmd_interactive)
{
/* May need to reset prompt, eg after \r command */
if (query_buf->len == 0)
prompt_status = PROMPT_READY;
line = gets_interactive(get_prompt(prompt_status));
}
else
{
line = gets_fromFile(source);
if (!line && ferror(source))
successResult = EXIT_FAILURE;
}
/*
* query_buf holds query already accumulated. line is the malloc'd
* new line of input (note it must be freed before looping around!)
*/
/* No more input. Time to quit, or \i done */
if (line == NULL)
{
if (pset.cur_cmd_interactive)
{
/* This tries to mimic bash's IGNOREEOF feature. */
count_eof++;
if (count_eof < GetVariableNum(pset.vars, "IGNOREEOF", 0, 10, false))
{
if (!pset.quiet)
printf(_("Use \"\\q\" to leave %s.\n"), pset.progname);
continue;
}
puts(pset.quiet ? "" : "\\q");
}
break;
}
count_eof = 0;
pset.lineno++;
/* ignore UTF-8 Unicode byte-order mark */
if (pset.lineno == 1 && pset.encoding == PG_UTF8 && strncmp(line, "\xef\xbb\xbf", 3) == 0)
memmove(line, line + 3, strlen(line + 3) + 1);
/* nothing left on line? then ignore */
if (line[0] == '\0' && !psql_scan_in_quote(scan_state))
{
free(line);
continue;
}
/* A request for help? Be friendly and give them some guidance */
if (pset.cur_cmd_interactive && query_buf->len == 0 &&
pg_strncasecmp(line, "help", 4) == 0 &&
(line[4] == '\0' || line[4] == ';' || isspace((unsigned char) line[4])))
{
free(line);
puts(_("You are using psql, the command-line interface to PostgreSQL."));
printf(_("Type: \\copyright for distribution terms\n"
" \\h for help with SQL commands\n"
" \\? for help with psql commands\n"
" \\g or terminate with semicolon to execute query\n"
" \\q to quit\n"));
fflush(stdout);
continue;
}
/* echo back if flag is set */
if (pset.echo == PSQL_ECHO_ALL && !pset.cur_cmd_interactive)
puts(line);
fflush(stdout);
/* insert newlines into query buffer between source lines */
if (query_buf->len > 0)
{
appendPQExpBufferChar(query_buf, '\n');
added_nl_pos = query_buf->len;
}
else
added_nl_pos = -1; /* flag we didn't add one */
/* Setting this will not have effect until next line. */
die_on_error = pset.on_error_stop;
/*
* Parse line, looking for command separators.
*/
psql_scan_setup(scan_state, line, strlen(line));
success = true;
line_saved_in_history = false;
while (success || !die_on_error)
{
PsqlScanResult scan_result;
promptStatus_t prompt_tmp = prompt_status;
scan_result = psql_scan(scan_state, query_buf, &prompt_tmp);
prompt_status = prompt_tmp;
if (PQExpBufferBroken(query_buf))
{
psql_error("out of memory\n");
exit(EXIT_FAILURE);
}
/*
* Send command if semicolon found, or if end of line and we're in
* single-line mode.
*/
if (scan_result == PSCAN_SEMICOLON ||
(scan_result == PSCAN_EOL && pset.singleline))
{
/*
* Save query in history. We use history_buf to accumulate
* multi-line queries into a single history entry.
*/
if (pset.cur_cmd_interactive && !line_saved_in_history)
{
pg_append_history(line, history_buf);
pg_send_history(history_buf);
line_saved_in_history = true;
}
/* execute query */
success = SendQuery(query_buf->data);
slashCmdStatus = success ? PSQL_CMD_SEND : PSQL_CMD_ERROR;
/* transfer query to previous_buf by pointer-swapping */
{
PQExpBuffer swap_buf = previous_buf;
previous_buf = query_buf;
query_buf = swap_buf;
}
resetPQExpBuffer(query_buf);
added_nl_pos = -1;
/* we need not do psql_scan_reset() here */
}
else if (scan_result == PSCAN_BACKSLASH)
{
/* handle backslash command */
/*
* If we added a newline to query_buf, and nothing else has
* been inserted in query_buf by the lexer, then strip off the
* newline again. This avoids any change to query_buf when a
* line contains only a backslash command. Also, in this
* situation we force out any previous lines as a separate
* history entry; we don't want SQL and backslash commands
* intermixed in history if at all possible.
*/
if (query_buf->len == added_nl_pos)
{
query_buf->data[--query_buf->len] = '\0';
pg_send_history(history_buf);
}
added_nl_pos = -1;
/* save backslash command in history */
if (pset.cur_cmd_interactive && !line_saved_in_history)
{
pg_append_history(line, history_buf);
pg_send_history(history_buf);
line_saved_in_history = true;
}
/* execute backslash command */
slashCmdStatus = HandleSlashCmds(scan_state,
query_buf->len > 0 ?
query_buf : previous_buf);
success = slashCmdStatus != PSQL_CMD_ERROR;
if ((slashCmdStatus == PSQL_CMD_SEND || slashCmdStatus == PSQL_CMD_NEWEDIT) &&
query_buf->len == 0)
{
/* copy previous buffer to current for handling */
appendPQExpBufferStr(query_buf, previous_buf->data);
}
if (slashCmdStatus == PSQL_CMD_SEND)
{
success = SendQuery(query_buf->data);
/* transfer query to previous_buf by pointer-swapping */
{
PQExpBuffer swap_buf = previous_buf;
previous_buf = query_buf;
query_buf = swap_buf;
}
resetPQExpBuffer(query_buf);
/* flush any paren nesting info after forced send */
psql_scan_reset(scan_state);
}
else if (slashCmdStatus == PSQL_CMD_NEWEDIT)
{
/* rescan query_buf as new input */
psql_scan_finish(scan_state);
free(line);
line = pg_strdup(query_buf->data);
resetPQExpBuffer(query_buf);
/* reset parsing state since we are rescanning whole line */
psql_scan_reset(scan_state);
psql_scan_setup(scan_state, line, strlen(line));
line_saved_in_history = false;
prompt_status = PROMPT_READY;
}
else if (slashCmdStatus == PSQL_CMD_TERMINATE)
break;
}
/* fall out of loop if lexer reached EOL */
if (scan_result == PSCAN_INCOMPLETE ||
scan_result == PSCAN_EOL)
break;
}
/* Add line to pending history if we didn't execute anything yet */
if (pset.cur_cmd_interactive && !line_saved_in_history)
pg_append_history(line, history_buf);
psql_scan_finish(scan_state);
free(line);
if (slashCmdStatus == PSQL_CMD_TERMINATE)
{
successResult = EXIT_SUCCESS;
break;
}
if (!pset.cur_cmd_interactive)
{
if (!success && die_on_error)
successResult = EXIT_USER;
/* Have we lost the db connection? */
else if (!pset.db)
successResult = EXIT_BADCONN;
}
} /* while !endoffile/session */
/*
* Process query at the end of file without a semicolon
*/
if (query_buf->len > 0 && !pset.cur_cmd_interactive &&
successResult == EXIT_SUCCESS)
{
/* save query in history */
if (pset.cur_cmd_interactive)
pg_send_history(history_buf);
/* execute query */
success = SendQuery(query_buf->data);
if (!success && die_on_error)
successResult = EXIT_USER;
else if (pset.db == NULL)
successResult = EXIT_BADCONN;
}
/*
* Let's just make real sure the SIGINT handler won't try to use
* sigint_interrupt_jmp after we exit this routine. If there is an outer
* MainLoop instance, it will reset sigint_interrupt_jmp to point to
* itself at the top of its loop, before any further interactive input
* happens.
*/
sigint_interrupt_enabled = false;
destroyPQExpBuffer(query_buf);
destroyPQExpBuffer(previous_buf);
destroyPQExpBuffer(history_buf);
psql_scan_destroy(scan_state);
pset.cur_cmd_source = prev_cmd_source;
pset.cur_cmd_interactive = prev_cmd_interactive;
pset.lineno = prev_lineno;
return successResult;
} /* MainLoop() */
1.7.1