Method Detail

• getCharacterEncoding

  java.lang.String getCharacterEncoding()

  Returns the name of the character encoding (MIME charset) used for the body sent in this response. The character encoding may have been specified explicitly using the setCharacterEncoding(java.lang.String) or setContentType(java.lang.String) methods, or implicitly using the setLocale(java.util.Locale) method. Explicit specifications take precedence over implicit specifications. Calls made to these methods after getWriter has been called or after the response has been committed have no effect on the character encoding. If no character encoding has been specified, ISO-8859-1 is returned.

  See RFC 2047 (http://www.ietf.org/rfc/rfc2047.txt) for more information about character encoding and MIME.

  Returns:

  a String specifying the name of the character encoding, for example, UTF-8

• getContentType

  java.lang.String getContentType()

  Returns the content type used for the MIME body sent in this response. The content type proper must have been specified using setContentType(java.lang.String) before the response is committed. If no content type has been specified, this method returns null. If a content type has been specified and a character encoding has been explicitly or implicitly specified as described in getCharacterEncoding(), the charset parameter is included in the string returned. If no character encoding has been specified, the charset parameter is omitted.

  Returns:

  a String specifying the content type, for example, text/html; charset=UTF-8, or null

  Since:

  2.4

• getOutputStream

  ServletOutputStream getOutputStream()
                                      throws java.io.IOException

  Returns a ServletOutputStream suitable for writing binary data in the response. The servlet container does not encode the binary data.

  Calling flush() on the ServletOutputStream commits the response. Either this method or getWriter() may be called to write the body, not both.

  Returns:

  a ServletOutputStream for writing binary data

  Throws:

  java.lang.IllegalStateException - if the getWriter method has been called on this response

  java.io.IOException - if an input or output exception occurred

  See Also:

  getWriter()

• getWriter

  java.io.PrintWriter getWriter()
                                throws java.io.IOException

  Returns a PrintWriter object that can send character text to the client. The PrintWriter uses the character encoding returned by getCharacterEncoding(). If the response's character encoding has not been specified as described in getCharacterEncoding (i.e., the method just returns the default value ISO-8859-1), getWriter updates it to ISO-8859-1.

  Calling flush() on the PrintWriter commits the response.

  Either this method or getOutputStream() may be called to write the body, not both.

  Returns:

  a PrintWriter object that can return character data to the client

  Throws:

  java.io.UnsupportedEncodingException - if the character encoding returned by getCharacterEncoding cannot be used

  java.lang.IllegalStateException - if the getOutputStream method has already been called for this response object

  java.io.IOException - if an input or output exception occurred

  See Also:

  getOutputStream(), setCharacterEncoding(java.lang.String)

• setCharacterEncoding

  void setCharacterEncoding(java.lang.String charset)

  Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. If the character encoding has already been set by setContentType(java.lang.String) or setLocale(java.util.Locale), this method overrides it. Calling setContentType(java.lang.String) with the String of text/html and calling this method with the String of UTF-8 is equivalent with calling setContentType with the String of text/html; charset=UTF-8.

  This method can be called repeatedly to change the character encoding. This method has no effect if it is called after getWriter has been called or after the response has been committed.

  Containers must communicate the character encoding used for the servlet response's writer to the client if the protocol provides a way for doing so. In the case of HTTP, the character encoding is communicated as part of the Content-Type header for text media types. Note that the character encoding cannot be communicated via HTTP headers if the servlet does not specify a content type; however, it is still used to encode text written via the servlet response's writer.

  Parameters:

  charset - a String specifying only the character set defined by IANA Character Sets (http://www.iana.org/assignments/character-sets)

  Since:

  2.4

  See Also:

  #setLocale

• setContentLength

  void setContentLength(int len)

  Sets the length of the content body in the response In HTTP servlets, this method sets the HTTP Content-Length header.

  Parameters:

  len - an integer specifying the length of the content being returned to the client; sets the Content-Length header

• setContentLengthLong

  void setContentLengthLong(long length)

  Sets the length of the content body in the response In HTTP servlets, this method sets the HTTP Content-Length header.

  Parameters:

  length - an integer specifying the length of the content being returned to the client; sets the Content-Length header

• setContentType

  void setContentType(java.lang.String type)

  Sets the content type of the response being sent to the client, if the response has not been committed yet. The given content type may include a character encoding specification, for example, text/html;charset=UTF-8. The response's character encoding is only set from the given content type if this method is called before getWriter is called.

  This method may be called repeatedly to change content type and character encoding. This method has no effect if called after the response has been committed. It does not set the response's character encoding if it is called after getWriter has been called or after the response has been committed.

  Containers must communicate the content type and the character encoding used for the servlet response's writer to the client if the protocol provides a way for doing so. In the case of HTTP, the Content-Type header is used.

  Parameters:

  type - a String specifying the MIME type of the content

  See Also:

  setLocale(java.util.Locale), setCharacterEncoding(java.lang.String), getOutputStream(), getWriter()

• setBufferSize

  void setBufferSize(int size)

  Sets the preferred buffer size for the body of the response. The servlet container will use a buffer at least as large as the size requested. The actual buffer size used can be found using getBufferSize.

  A larger buffer allows more content to be written before anything is actually sent, thus providing the servlet with more time to set appropriate status codes and headers. A smaller buffer decreases server memory load and allows the client to start receiving data more quickly.

  This method must be called before any response body content is written; if content has been written or the response object has been committed, this method throws an IllegalStateException.

  Parameters:

  size - the preferred buffer size

  Throws:

  java.lang.IllegalStateException - if this method is called after content has been written

  See Also:

  getBufferSize(), flushBuffer(), isCommitted(), reset()

• getBufferSize

  int getBufferSize()

  Returns the actual buffer size used for the response. If no buffering is used, this method returns 0.

  Returns:

  the actual buffer size used

  See Also:

  setBufferSize(int), flushBuffer(), isCommitted(), reset()

• flushBuffer

  void flushBuffer()
                   throws java.io.IOException

  Forces any content in the buffer to be written to the client. A call to this method automatically commits the response, meaning the status code and headers will be written.

  Throws:

  java.io.IOException - if an I/O occurs during the flushing of the response

  See Also:

  setBufferSize(int), getBufferSize(), isCommitted(), reset()

• resetBuffer

  void resetBuffer()

  Clears the content of the underlying buffer in the response without clearing headers or status code. If the response has been committed, this method throws an IllegalStateException.

  Since:

  2.3

  See Also:

  setBufferSize(int), getBufferSize(), isCommitted(), reset()

• isCommitted

  boolean isCommitted()

  Returns a boolean indicating if the response has been committed. A committed response has already had its status code and headers written.

  Returns:

  a boolean indicating if the response has been committed

  See Also:

  setBufferSize(int), getBufferSize(), flushBuffer(), reset()

• reset

  void reset()

  Clears any data that exists in the buffer as well as the status code and headers. If the response has been committed, this method throws an IllegalStateException.

  Throws:

  java.lang.IllegalStateException - if the response has already been committed

  See Also:

  setBufferSize(int), getBufferSize(), flushBuffer(), isCommitted()

• setLocale

  void setLocale(java.util.Locale loc)

  Sets the locale of the response, if the response has not been committed yet. It also sets the response's character encoding appropriately for the locale, if the character encoding has not been explicitly set using setContentType(java.lang.String) or setCharacterEncoding(java.lang.String), getWriter hasn't been called yet, and the response hasn't been committed yet. If the deployment descriptor contains a locale-encoding-mapping-list element, and that element provides a mapping for the given locale, that mapping is used. Otherwise, the mapping from locale to character encoding is container dependent.

  This method may be called repeatedly to change locale and character encoding. The method has no effect if called after the response has been committed. It does not set the response's character encoding if it is called after setContentType(java.lang.String) has been called with a charset specification, after setCharacterEncoding(java.lang.String) has been called, after getWriter has been called, or after the response has been committed.

  Containers must communicate the locale and the character encoding used for the servlet response's writer to the client if the protocol provides a way for doing so. In the case of HTTP, the locale is communicated via the Content-Language header, the character encoding as part of the Content-Type header for text media types. Note that the character encoding cannot be communicated via HTTP headers if the servlet does not specify a content type; however, it is still used to encode text written via the servlet response's writer.

  Parameters:

  loc - the locale of the response

  See Also:

  getLocale(), setContentType(java.lang.String), setCharacterEncoding(java.lang.String)

• getLocale

  java.util.Locale getLocale()

  Returns the locale specified for this response using the setLocale(java.util.Locale) method. Calls made to setLocale after the response is committed have no effect.

  Returns:

  The locale specified for this response using the setLocale(java.util.Locale) method. If no locale has been specified, the container's default locale is returned.

  See Also:

  setLocale(java.util.Locale)