Configuring Ceph

When you start the Ceph service, the initialization process activates a series of daemons that run in the background. A Ceph Storage Cluster runs two types of daemons:

• Ceph Monitor (ceph-mon)
• Ceph OSD Daemon (ceph-osd)

Ceph Storage Clusters that support the Ceph Filesystem run at least one Ceph Metadata Server (ceph-mds). Clusters that support Ceph Object Storage run Ceph Gateway daemons (radosgw). For your convenience, each daemon has a series of default values (i.e., many are set by ceph/src/common/config_opts.h). You may override these settings with a Ceph configuration file.

The Configuration File

When you start a Ceph Storage Cluster, each daemon looks for a Ceph configuration file (i.e., ceph.conf by default) that provides the cluster’s configuration settings. For manual deployments, you need to create a Ceph configuration file. For tools that create configuration files for you (e.g., ceph-deploy, Chef, etc.), you may use the information contained herein as a reference. The Ceph configuration file defines:

• Cluster Identity
• Authentication settings
• Cluster membership
• Host names
• Host addresses
• Paths to keyrings
• Paths to journals
• Paths to data
• Other runtime options

The default Ceph configuration file locations in sequential order include:

1. $CEPH_CONF (i.e., the path following the $CEPH_CONF environment variable)
2. -c path/path (i.e., the -c command line argument)
3. /etc/ceph/ceph.conf
4. ~/.ceph/config
5. ./ceph.conf (i.e., in the current working directory)

The Ceph configuration file uses an ini style syntax. You can add comments by preceding comments with a pound sign (#) or a semi-colon (;). For example:

# <--A number (#) sign precedes a comment.
; A comment may be anything.
# Comments always follow a semi-colon (;) or a pound (#) on each line.
# The end of the line terminates a comment.
# We recommend that you provide comments in your configuration file(s).

Config Sections

The configuration file can configure all Ceph daemons in a Ceph Storage Cluster, or all Ceph daemons of a particular type. To configure a series of daemons, the settings must be included under the processes that will receive the configuration as follows:

[global]

Description:Settings under [global] affect all daemons in a Ceph Storage Cluster. Example:auth supported = cephx

[osd]

Description:Settings under [osd] affect all ceph-osd daemons in the Ceph Storage Cluster, and override the same setting in [global]. Example:osd journal size = 1000

[mon]

Description:Settings under [mon] affect all ceph-mon daemons in the Ceph Storage Cluster, and override the same setting in [global]. Example:mon addr = 10.0.0.101:6789

[mds]

Description:Settings under [mds] affect all ceph-mds daemons in the Ceph Storage Cluster, and override the same setting in [global]. Example:host = myserver01

[client]

Description:Settings under [client] affect all Ceph Clients (e.g., mounted Ceph Filesystems, mounted Ceph Block Devices, etc.). Example:log file = /var/log/ceph/radosgw.log

Global settings affect all instances of all daemon in the Ceph Storage Cluster. Use the [global] setting for values that are common for all daemons in the Ceph Storage Cluster. You can override each [global] setting by:

1. Changing the setting in a particular process type (e.g., [osd], [mon], [mds] ).
2. Changing the setting in a particular process (e.g., [osd.1] ).

Overriding a global setting affects all child processes, except those that you specifically override in a particular daemon.

A typical global setting involves activating authentication. For example:

[global]
#Enable authentication between hosts within the cluster.
#v 0.54 and earlier
auth supported = cephx

#v 0.55 and after
auth cluster required = cephx
auth service required = cephx
auth client required = cephx

You can specify settings that apply to a particular type of daemon. When you specify settings under [osd], [mon] or [mds] without specifying a particular instance, the setting will apply to all OSDs, monitors or metadata daemons respectively.

A typical daemon-wide setting involves setting journal sizes, filestore settings, etc. For example:

[osd]
osd journal size = 1000

You may specify settings for particular instances of a daemon. You may specify an instance by entering its type, delimited by a period (.) and by the instance ID. The instance ID for a Ceph OSD Daemon is always numeric, but it may be alphanumeric for Ceph Monitors and Ceph Metadata Servers.

[osd.1]
# settings affect osd.1 only.

[mon.a]
# settings affect mon.a only.

[mds.b]
# settings affect mds.b only.

If the daemon you specify is a Ceph Gateway client, specify the daemon and the instance, delimited by a period (.). For example:

[client.radosgw.instance-name]
# settings affect client.radosgw.instance-name only.

Metavariables

Metavariables simplify Ceph Storage Cluster configuration dramatically. When a metavariable is set in a configuration value, Ceph expands the metavariable into a concrete value. Metavariables are very powerful when used within the [global], [osd], [mon], [mds] or [client] sections of your configuration file. Ceph metavariables are similar to Bash shell expansion.

Ceph supports the following metavariables:

$cluster

Description:Expands to the Ceph Storage Cluster name. Useful when running multiple Ceph Storage Clusters on the same hardware. Example:/etc/ceph/$cluster.keyring Default:ceph

$type

Description:Expands to one of mds, osd, or mon, depending on the type of the instant daemon. Example:/var/lib/ceph/$type

$id

Description:Expands to the daemon identifier. For osd.0, this would be 0; for mds.a, it would be a. Example:/var/lib/ceph/$type/$cluster-$id

$host

Description:Expands to the host name of the instant daemon.

$name

Description:Expands to $type.$id. Example:/var/run/ceph/$cluster-$name.asok

Common Settings

The Hardware Recommendations section provides some hardware guidelines for configuring a Ceph Storage Cluster. It is possible for a single Ceph Node to run multiple daemons. For example, a single node with multiple drives may run one ceph-osd for each drive. Ideally, you will have a node for a particular type of process. For example, some nodes may run ceph-osd daemons, other nodes may run ceph-mds daemons, and still other nodes may run ceph-mon daemons.

Each node has a name identified by the host setting. Monitors also specify a network address and port (i.e., domain name or IP address) identified by the addr setting. A basic configuration file will typically specify only minimal settings for each instance of monitor daemons. For example:

[global]
mon_initial_members = ceph1
mon_host = 10.0.0.1

Important

The host setting is the short name of the node (i.e., not an fqdn). It is NOT an IP address either. Enter hostname -s on the command line to retrieve the name of the node. Do not use host settings for anything other than initial monitors unless you are deploying Ceph manually. You MUST NOT specify host under individual daemons when using deployment tools like chef or ceph-deploy, as those tools will enter the appropriate values for you in the cluster map.

Networks

See the Network Configuration Reference for a detailed discussion about configuring a network for use with Ceph.

Monitors

Ceph production clusters typically deploy with a minimum 3 Ceph Monitor daemons to ensure high availability should a monitor instance crash. At least three (3) monitors ensures that the Paxos algorithm can determine which version of the Ceph Cluster Map is the most recent from a majority of Ceph Monitors in the quorum.

Note

You may deploy Ceph with a single monitor, but if the instance fails, the lack of other monitors may interrupt data service availability.

Ceph Monitors typically listen on port 6789. For example:

[mon.a]
host = hostName
mon addr = 150.140.130.120:6789

By default, Ceph expects that you will store a monitor’s data under the following path:

/var/lib/ceph/mon/$cluster-$id

You or a deployment tool (e.g., ceph-deploy) must create the corresponding directory. With metavariables fully expressed and a cluster named “ceph”, the foregoing directory would evaluate to:

/var/lib/ceph/mon/ceph-a

For additional details, see the Monitor Config Reference.

Authentication

New in version Bobtail: 0.56

For Bobtail (v 0.56) and beyond, you should expressly enable or disable authentication in the [global] section of your Ceph configuration file.

auth cluster required = cephx
auth service required = cephx
auth client required = cephx

Additionally, you should enable message signing. See Cephx Config Reference and Cephx Authentication for details.

Important

When upgrading, we recommend expressly disabling authentication first, then perform the upgrade. Once the upgrade is complete, re-enable authentication.

OSDs

Ceph production clusters typically deploy Ceph OSD Daemons where one node has one OSD daemon running a filestore on one storage drive. A typical deployment specifies a journal size. For example:

[osd]
osd journal size = 10000

[osd.0]
host = {hostname} #manual deployments only.

By default, Ceph expects that you will store a Ceph OSD Daemon’s data with the following path:

/var/lib/ceph/osd/$cluster-$id

You or a deployment tool (e.g., ceph-deploy) must create the corresponding directory. With metavariables fully expressed and a cluster named “ceph”, the foregoing directory would evaluate to:

/var/lib/ceph/osd/ceph-0

You may override this path using the osd data setting. We don’t recommend changing the default location. Create the default directory on your OSD host.

ssh {osd-host}
sudo mkdir /var/lib/ceph/osd/ceph-{osd-number}

The osd data path ideally leads to a mount point with a hard disk that is separate from the hard disk storing and running the operating system and daemons. If the OSD is for a disk other than the OS disk, prepare it for use with Ceph, and mount it to the directory you just created:

ssh {new-osd-host}
sudo mkfs -t {fstype} /dev/{disk}
sudo mount -o user_xattr /dev/{hdd} /var/lib/ceph/osd/ceph-{osd-number}

We recommend using the xfs file system or the btrfs file system when running mkfs.

See the OSD Config Reference for additional configuration details.

Heartbeats

During runtime operations, Ceph OSD Daemons check up on other Ceph OSD Daemons and report their findings to the Ceph Monitor. You do not have to provide any settings. However, if you have network latency issues, you may wish to modify the settings.

See Configuring Monitor/OSD Interaction for additional details.

Logs / Debugging

Sometimes you may encounter issues with Ceph that require modifying logging output and using Ceph’s debugging. See Debugging and Logging for details on log rotation.

Example ceph.conf

[global]
fsid = {cluster-id}
mon initial members = {hostname}[, {hostname}]
mon host = {ip-address}[, {ip-address}]

#All clusters have a front-side public network.
#If you have two NICs, you can configure a back side cluster 
#network for OSD object replication, heart beats, backfilling,
#recovery, etc.
public network = {network}[, {network}]
#cluster network = {network}[, {network}] 

#Clusters require authentication by default.
auth cluster required = cephx
auth service required = cephx
auth client required = cephx

#Choose reasonable numbers for your journals, number of replicas
#and placement groups.
osd journal size = {n}
osd pool default size = {n}  # Write an object n times.
osd pool default min size = {n} # Allow writing n copy in a degraded state.
osd pool default pg num = {n}
osd pool default pgp num = {n}

#Choose a reasonable crush leaf type.
#0 for a 1-node cluster.
#1 for a multi node cluster in a single rack
#2 for a multi node, multi chassis cluster with multiple hosts in a chassis
#3 for a multi node cluster with hosts across racks, etc.
osd crush chooseleaf type = {n}

Runtime Changes

Ceph allows you to make changes to the configuration of a ceph-osd, ceph-mon, or ceph-mds daemon at runtime. This capability is quite useful for increasing/decreasing logging output, enabling/disabling debug settings, and even for runtime optimization. The following reflects runtime configuration usage:

ceph tell {daemon-type}.{id or *} injectargs --{name} {value} [--{name} {value}]

Replace {daemon-type} with one of osd, mon or mds. You may apply the runtime setting to all daemons of a particular type with *, or specify a specific daemon’s ID (i.e., its number or letter). For example, to increase debug logging for a ceph-osd daemon named osd.0, execute the following:

ceph tell osd.0 injectargs --debug-osd 20 --debug-ms 1

In your ceph.conf file, you may use spaces when specifying a setting name. When specifying a setting name on the command line, ensure that you use an underscore or hyphen (_ or -) between terms (e.g., debug osd becomes --debug-osd).

Viewing a Configuration at Runtime

If your Ceph Storage Cluster is running, and you would like to see the configuration settings from a running daemon, execute the following:

ceph daemon {daemon-type}.{id} config show | less

If you are on a machine where osd.0 is running, the command would be:

ceph daemon osd.0 config show | less

Running Multiple Clusters

With Ceph, you can run multiple Ceph Storage Clusters on the same hardware. Running multiple clusters provides a higher level of isolation compared to using different pools on the same cluster with different CRUSH rulesets. A separate cluster will have separate monitor, OSD and metadata server processes. When running Ceph with default settings, the default cluster name is ceph, which means you would save your Ceph configuration file with the file name ceph.conf in the /etc/ceph default directory.

See ceph-deploy new for details. .. _ceph-deploy new:../ceph-deploy-new

When you run multiple clusters, you must name your cluster and save the Ceph configuration file with the name of the cluster. For example, a cluster named openstack will have a Ceph configuration file with the file name openstack.conf in the /etc/ceph default directory.

Important

Cluster names must consist of letters a-z and digits 0-9 only.

Separate clusters imply separate data disks and journals, which are not shared between clusters. Referring to Metavariables, the $cluster metavariable evaluates to the cluster name (i.e., openstack in the foregoing example). Various settings use the $cluster metavariable, including:

• keyring
• admin socket
• log file
• pid file
• mon data
• mon cluster log file
• osd data
• osd journal
• mds data
• rgw data

See General Settings, OSD Settings, Monitor Settings, MDS Settings, RGW Settings and Log Settings for relevant path defaults that use the $cluster metavariable.

When creating default directories or files, you should use the cluster name at the appropriate places in the path. For example:

sudo mkdir /var/lib/ceph/osd/openstack-0
sudo mkdir /var/lib/ceph/mon/openstack-a

Important

When running monitors on the same host, you should use different ports. By default, monitors use port 6789. If you already have monitors using port 6789, use a different port for your other cluster(s).

To invoke a cluster other than the default ceph cluster, use the -c {filename}.conf option with the ceph command. For example:

ceph -c {cluster-name}.conf health
ceph -c openstack.conf health