setup.c

Go to the documentation of this file.

/*
 * ATSTK1000 board-specific setup code.
 *
 * Copyright (C) 2005-2006 Atmel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/bootmem.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/linkage.h>

#include <video/atmel_lcdc.h>

#include <asm/setup.h>

#include <mach/at32ap700x.h>
#include <mach/board.h>
#include <mach/portmux.h>

#include "atstk1000.h"

/* Initialized by bootloader-specific startup code. */
struct tag *bootloader_tags __initdata;

static struct fb_videomode __initdata ltv350qv_modes[] = {
    {
        .name       = "320x240 @ 75",
        .refresh    = 75,
        .xres       = 320,      .yres       = 240,
        .pixclock   = KHZ2PICOS(6891),

        .left_margin    = 17,       .right_margin   = 33,
        .upper_margin   = 10,       .lower_margin   = 10,
        .hsync_len  = 16,       .vsync_len  = 1,

        .sync       = 0,
        .vmode      = FB_VMODE_NONINTERLACED,
    },
};

static struct fb_monspecs __initdata atstk1000_default_monspecs = {
    .manufacturer       = "SNG",
    .monitor        = "LTV350QV",
    .modedb         = ltv350qv_modes,
    .modedb_len     = ARRAY_SIZE(ltv350qv_modes),
    .hfmin          = 14820,
    .hfmax          = 22230,
    .vfmin          = 60,
    .vfmax          = 90,
    .dclkmax        = 30000000,
};

struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
    .default_bpp        = 24,
    .default_dmacon     = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
    .default_lcdcon2    = (ATMEL_LCDC_DISTYPE_TFT
                   | ATMEL_LCDC_INVCLK
                   | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
                   | ATMEL_LCDC_MEMOR_BIG),
    .default_monspecs   = &atstk1000_default_monspecs,
    .guard_time     = 2,
};

#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
#include <linux/leds.h>

static struct gpio_led stk1000_j2_led[] = {
#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
#define LEDSTRING "J2 jumpered to LED8"
    { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
    { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
    { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
    { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
    { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
    { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
    { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
    { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
            .default_trigger = "heartbeat", },
#else   /* RGB */
#define LEDSTRING "J2 jumpered to RGB LEDs"
    { .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
    { .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
    { .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },

    { .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
            .default_trigger = "heartbeat", },
    { .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
    { .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
            .default_trigger = "heartbeat", },
    /* PB16, PB30 unused */
#endif
};

static struct gpio_led_platform_data stk1000_j2_led_data = {
    .num_leds   = ARRAY_SIZE(stk1000_j2_led),
    .leds       = stk1000_j2_led,
};

static struct platform_device stk1000_j2_led_dev = {
    .name       = "leds-gpio",
    .id     = 2,    /* gpio block J2 */
    .dev        = {
        .platform_data  = &stk1000_j2_led_data,
    },
};

void __init atstk1000_setup_j2_leds(void)
{
    unsigned    i;

    for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
        at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);

    printk("STK1000: " LEDSTRING "\n");
    platform_device_register(&stk1000_j2_led_dev);
}
#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
void __init atstk1000_setup_j2_leds(void)
{

}
#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */