Linux Kernel  3.7.1
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
defBF522.h
Go to the documentation of this file.
1 /*
2  * Copyright 2007-2010 Analog Devices Inc.
3  *
4  * Licensed under the Clear BSD license or the GPL-2 (or later)
5  */
6 
7 #ifndef _DEF_BF522_H
8 #define _DEF_BF522_H
9 
10 /* ************************************************************** */
11 /* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */
12 /* ************************************************************** */
13 
14 /* ==== begin from defBF534.h ==== */
15 
16 /* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
17 #define PLL_CTL 0xFFC00000 /* PLL Control Register */
18 #define PLL_DIV 0xFFC00004 /* PLL Divide Register */
19 #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
20 #define PLL_STAT 0xFFC0000C /* PLL Status Register */
21 #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
22 #define CHIPID 0xFFC00014 /* Device ID Register */
23 
24 
25 /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
26 #define SWRST 0xFFC00100 /* Software Reset Register */
27 #define SYSCR 0xFFC00104 /* System Configuration Register */
28 #define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */
29 
30 #define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
31 #define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
32 #define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
33 #define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
34 #define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
35 #define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
36 #define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
37 
38 /* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
39 #define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */
40 #define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */
41 #define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */
42 #define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */
43 #define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */
44 #define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */
45 #define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */
46 
47 
48 /* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
49 #define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
50 #define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
51 #define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
52 
53 
54 /* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
55 #define RTC_STAT 0xFFC00300 /* RTC Status Register */
56 #define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
57 #define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
58 #define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
59 #define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
60 #define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
61 #define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
62 
63 
64 /* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
65 #define UART0_THR 0xFFC00400 /* Transmit Holding register */
66 #define UART0_RBR 0xFFC00400 /* Receive Buffer register */
67 #define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
68 #define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
69 #define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
70 #define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
71 #define UART0_LCR 0xFFC0040C /* Line Control Register */
72 #define UART0_MCR 0xFFC00410 /* Modem Control Register */
73 #define UART0_LSR 0xFFC00414 /* Line Status Register */
74 #define UART0_MSR 0xFFC00418 /* Modem Status Register */
75 #define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
76 #define UART0_GCTL 0xFFC00424 /* Global Control Register */
77 
78 
79 /* SPI Controller (0xFFC00500 - 0xFFC005FF) */
80 #define SPI0_REGBASE 0xFFC00500
81 #define SPI_CTL 0xFFC00500 /* SPI Control Register */
82 #define SPI_FLG 0xFFC00504 /* SPI Flag register */
83 #define SPI_STAT 0xFFC00508 /* SPI Status register */
84 #define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
85 #define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
86 #define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
87 #define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
88 
89 
90 /* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
91 #define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
92 #define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
93 #define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
94 #define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
95 
96 #define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
97 #define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
98 #define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
99 #define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
100 
101 #define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
102 #define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
103 #define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
104 #define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
105 
106 #define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
107 #define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
108 #define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
109 #define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
110 
111 #define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
112 #define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
113 #define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
114 #define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
115 
116 #define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
117 #define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
118 #define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
119 #define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
120 
121 #define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
122 #define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
123 #define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
124 #define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
125 
126 #define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
127 #define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
128 #define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
129 #define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
130 
131 #define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
132 #define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
133 #define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
134 
135 
136 /* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
137 #define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
138 #define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
139 #define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
140 #define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
141 #define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
142 #define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
143 #define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
144 #define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
145 #define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
146 #define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
147 #define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
148 #define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
149 #define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
150 #define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
151 #define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
152 #define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
153 #define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
154 
155 
156 /* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
157 #define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
158 #define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
159 #define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
160 #define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
161 #define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
162 #define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
163 #define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
164 #define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
165 #define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
166 #define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
167 #define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
168 #define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
169 #define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
170 #define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
171 #define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
172 #define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
173 #define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
174 #define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
175 #define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
176 #define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
177 #define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
178 #define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
179 
180 
181 /* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
182 #define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
183 #define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
184 #define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
185 #define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
186 #define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
187 #define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
188 #define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
189 #define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
190 #define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
191 #define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
192 #define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
193 #define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
194 #define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
195 #define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
196 #define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
197 #define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
198 #define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
199 #define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
200 #define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
201 #define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
202 #define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
203 #define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
204 
205 
206 /* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
207 #define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
208 #define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
209 #define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
210 #define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
211 #define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
212 #define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
213 #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
214 
215 
216 /* DMA Traffic Control Registers */
217 #define DMAC_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
218 #define DMAC_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
219 
220 /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
221 #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
222 #define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
223 #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
224 #define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
225 #define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
226 #define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
227 #define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
228 #define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
229 #define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
230 #define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
231 #define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
232 #define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
233 #define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
234 
235 #define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
236 #define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
237 #define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
238 #define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
239 #define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
240 #define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
241 #define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
242 #define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
243 #define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
244 #define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
245 #define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
246 #define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
247 #define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
248 
249 #define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
250 #define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
251 #define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
252 #define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
253 #define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
254 #define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
255 #define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
256 #define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
257 #define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
258 #define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
259 #define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
260 #define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
261 #define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
262 
263 #define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
264 #define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
265 #define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
266 #define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
267 #define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
268 #define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
269 #define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
270 #define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
271 #define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
272 #define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
273 #define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
274 #define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
275 #define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
276 
277 #define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
278 #define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
279 #define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
280 #define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
281 #define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
282 #define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
283 #define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
284 #define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
285 #define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
286 #define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
287 #define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
288 #define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
289 #define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
290 
291 #define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
292 #define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
293 #define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
294 #define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
295 #define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
296 #define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
297 #define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
298 #define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
299 #define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
300 #define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
301 #define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
302 #define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
303 #define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
304 
305 #define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
306 #define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
307 #define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
308 #define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
309 #define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
310 #define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
311 #define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
312 #define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
313 #define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
314 #define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
315 #define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
316 #define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
317 #define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
318 
319 #define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
320 #define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
321 #define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
322 #define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
323 #define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
324 #define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
325 #define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
326 #define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
327 #define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
328 #define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
329 #define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
330 #define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
331 #define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
332 
333 #define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
334 #define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
335 #define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
336 #define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
337 #define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
338 #define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
339 #define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
340 #define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
341 #define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
342 #define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
343 #define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
344 #define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
345 #define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
346 
347 #define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
348 #define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
349 #define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
350 #define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
351 #define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
352 #define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
353 #define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
354 #define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
355 #define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
356 #define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
357 #define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
358 #define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
359 #define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
360 
361 #define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
362 #define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
363 #define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
364 #define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
365 #define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
366 #define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
367 #define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
368 #define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
369 #define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
370 #define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
371 #define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
372 #define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
373 #define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
374 
375 #define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
376 #define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
377 #define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
378 #define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
379 #define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
380 #define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
381 #define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
382 #define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
383 #define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
384 #define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
385 #define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
386 #define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
387 #define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
388 
389 #define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
390 #define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
391 #define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
392 #define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
393 #define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
394 #define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
395 #define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
396 #define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
397 #define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
398 #define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
399 #define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
400 #define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
401 #define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
402 
403 #define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
404 #define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
405 #define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
406 #define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
407 #define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
408 #define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
409 #define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
410 #define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
411 #define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
412 #define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
413 #define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
414 #define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
415 #define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
416 
417 #define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
418 #define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
419 #define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
420 #define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
421 #define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
422 #define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
423 #define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
424 #define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
425 #define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
426 #define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
427 #define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
428 #define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
429 #define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
430 
431 #define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
432 #define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
433 #define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
434 #define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
435 #define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
436 #define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
437 #define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
438 #define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
439 #define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
440 #define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
441 #define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
442 #define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
443 #define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
444 
445 
446 /* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
447 #define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
448 #define PPI_STATUS 0xFFC01004 /* PPI Status Register */
449 #define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
450 #define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
451 #define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
452 
453 
454 /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
455 #define TWI0_REGBASE 0xFFC01400
456 #define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
457 #define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */
458 #define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
459 #define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
460 #define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
461 #define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
462 #define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
463 #define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
464 #define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
465 #define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
466 #define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
467 #define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
468 #define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
469 #define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
470 #define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
471 #define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
472 
473 
474 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
475 #define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
476 #define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
477 #define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
478 #define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
479 #define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
480 #define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
481 #define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
482 #define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
483 #define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
484 #define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
485 #define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
486 #define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
487 #define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
488 #define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
489 #define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
490 #define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
491 #define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
492 
493 
494 /* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
495 #define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
496 #define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
497 #define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
498 #define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
499 #define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
500 #define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
501 #define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
502 #define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
503 #define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
504 #define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
505 #define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
506 #define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
507 #define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
508 #define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
509 #define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
510 #define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
511 #define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
512 
513 
514 /* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
515 #define UART1_THR 0xFFC02000 /* Transmit Holding register */
516 #define UART1_RBR 0xFFC02000 /* Receive Buffer register */
517 #define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
518 #define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
519 #define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
520 #define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
521 #define UART1_LCR 0xFFC0200C /* Line Control Register */
522 #define UART1_MCR 0xFFC02010 /* Modem Control Register */
523 #define UART1_LSR 0xFFC02014 /* Line Status Register */
524 #define UART1_MSR 0xFFC02018 /* Modem Status Register */
525 #define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
526 #define UART1_GCTL 0xFFC02024 /* Global Control Register */
527 
528 
529 /* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
530 
531 /* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
532 #define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
533 #define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
534 #define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
535 #define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */
536 
537 
538 /* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
539 #define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
540 #define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
541 #define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
542 #define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
543 #define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
544 #define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
545 #define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
546 
547 #define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
548 #define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
549 #define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
550 #define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
551 #define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
552 #define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
553 #define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
554 
555 /* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
556 #define PORTF_MUX 0xFFC03210 /* Port F mux control */
557 #define PORTG_MUX 0xFFC03214 /* Port G mux control */
558 #define PORTH_MUX 0xFFC03218 /* Port H mux control */
559 #define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */
560 #define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */
561 #define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */
562 #define PORTF_SLEW 0xFFC03230 /* Port F slew control */
563 #define PORTG_SLEW 0xFFC03234 /* Port G slew control */
564 #define PORTH_SLEW 0xFFC03238 /* Port H slew control */
565 #define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */
566 #define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */
567 #define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */
568 #define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */
569 #define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */
570 #define MISCPORT_HYSTERESIS 0xFFC03288 /* Misc Port Schmitt trigger control */
571 
572 
573 /***********************************************************************************
574 ** System MMR Register Bits And Macros
575 **
576 ** Disclaimer: All macros are intended to make C and Assembly code more readable.
577 ** Use these macros carefully, as any that do left shifts for field
578 ** depositing will result in the lower order bits being destroyed. Any
579 ** macro that shifts left to properly position the bit-field should be
580 ** used as part of an OR to initialize a register and NOT as a dynamic
581 ** modifier UNLESS the lower order bits are saved and ORed back in when
582 ** the macro is used.
583 *************************************************************************************/
584 
585 /* CHIPID Masks */
586 #define CHIPID_VERSION 0xF0000000
587 #define CHIPID_FAMILY 0x0FFFF000
588 #define CHIPID_MANUFACTURE 0x00000FFE
589 
590 /* SWRST Masks */
591 #define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
592 #define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
593 #define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
594 #define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
595 #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
596 
597 /* SYSCR Masks */
598 #define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */
599 #define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */
600 
601 
602 /* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
603 /* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
604 
605 #if 0
606 #define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
607 
608 #define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
609 #define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
610 #define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
611 #define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
612 #define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
613 #define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */
614 #define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */
615 
616 #define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */
617 #define IRQ_TWI 0x00000200 /* TWI Interrupt */
618 #define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */
619 #define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
620 #define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */
621 #define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */
622 #define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */
623 #define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */
624 
625 #define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */
626 #define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */
627 #define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */
628 #define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */
629 #define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */
630 #define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */
631 #define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */
632 #define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */
633 #define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */
634 #define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */
635 
636 #define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */
637 #define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */
638 #define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */
639 #define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */
640 #define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */
641 #define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */
642 #define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
643 #define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */
644 #define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
645 #define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */
646 #define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */
647 #endif
648 
649 /* SIC_IAR0 Macros */
650 #define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */
651 #define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */
652 #define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */
653 #define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */
654 #define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */
655 #define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */
656 #define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */
657 #define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */
658 
659 /* SIC_IAR1 Macros */
660 #define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */
661 #define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */
662 #define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */
663 #define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */
664 #define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */
665 #define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */
666 #define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */
667 #define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */
668 
669 /* SIC_IAR2 Macros */
670 #define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */
671 #define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */
672 #define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */
673 #define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */
674 #define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */
675 #define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */
676 #define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */
677 #define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */
678 
679 /* SIC_IAR3 Macros */
680 #define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */
681 #define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */
682 #define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */
683 #define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */
684 #define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */
685 #define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */
686 #define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */
687 #define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */
688 
689 
690 /* SIC_IMASK Masks */
691 #define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
692 #define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
693 #define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
694 #define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
695 
696 /* SIC_IWR Masks */
697 #define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
698 #define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
699 #define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
700 #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
701 
702 /* **************** GENERAL PURPOSE TIMER MASKS **********************/
703 /* TIMER_ENABLE Masks */
704 #define TIMEN0 0x0001 /* Enable Timer 0 */
705 #define TIMEN1 0x0002 /* Enable Timer 1 */
706 #define TIMEN2 0x0004 /* Enable Timer 2 */
707 #define TIMEN3 0x0008 /* Enable Timer 3 */
708 #define TIMEN4 0x0010 /* Enable Timer 4 */
709 #define TIMEN5 0x0020 /* Enable Timer 5 */
710 #define TIMEN6 0x0040 /* Enable Timer 6 */
711 #define TIMEN7 0x0080 /* Enable Timer 7 */
712 
713 /* TIMER_DISABLE Masks */
714 #define TIMDIS0 TIMEN0 /* Disable Timer 0 */
715 #define TIMDIS1 TIMEN1 /* Disable Timer 1 */
716 #define TIMDIS2 TIMEN2 /* Disable Timer 2 */
717 #define TIMDIS3 TIMEN3 /* Disable Timer 3 */
718 #define TIMDIS4 TIMEN4 /* Disable Timer 4 */
719 #define TIMDIS5 TIMEN5 /* Disable Timer 5 */
720 #define TIMDIS6 TIMEN6 /* Disable Timer 6 */
721 #define TIMDIS7 TIMEN7 /* Disable Timer 7 */
722 
723 /* TIMER_STATUS Masks */
724 #define TIMIL0 0x00000001 /* Timer 0 Interrupt */
725 #define TIMIL1 0x00000002 /* Timer 1 Interrupt */
726 #define TIMIL2 0x00000004 /* Timer 2 Interrupt */
727 #define TIMIL3 0x00000008 /* Timer 3 Interrupt */
728 #define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
729 #define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
730 #define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
731 #define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
732 #define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
733 #define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
734 #define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
735 #define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
736 #define TIMIL4 0x00010000 /* Timer 4 Interrupt */
737 #define TIMIL5 0x00020000 /* Timer 5 Interrupt */
738 #define TIMIL6 0x00040000 /* Timer 6 Interrupt */
739 #define TIMIL7 0x00080000 /* Timer 7 Interrupt */
740 #define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
741 #define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
742 #define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
743 #define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
744 #define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
745 #define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
746 #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
747 #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
748 
749 /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
750 #define TOVL_ERR0 TOVF_ERR0
751 #define TOVL_ERR1 TOVF_ERR1
752 #define TOVL_ERR2 TOVF_ERR2
753 #define TOVL_ERR3 TOVF_ERR3
754 #define TOVL_ERR4 TOVF_ERR4
755 #define TOVL_ERR5 TOVF_ERR5
756 #define TOVL_ERR6 TOVF_ERR6
757 #define TOVL_ERR7 TOVF_ERR7
758 
759 /* TIMERx_CONFIG Masks */
760 #define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
761 #define WDTH_CAP 0x0002 /* Width Capture Input Mode */
762 #define EXT_CLK 0x0003 /* External Clock Mode */
763 #define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
764 #define PERIOD_CNT 0x0008 /* Period Count */
765 #define IRQ_ENA 0x0010 /* Interrupt Request Enable */
766 #define TIN_SEL 0x0020 /* Timer Input Select */
767 #define OUT_DIS 0x0040 /* Output Pad Disable */
768 #define CLK_SEL 0x0080 /* Timer Clock Select */
769 #define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
770 #define EMU_RUN 0x0200 /* Emulation Behavior Select */
771 #define ERR_TYP 0xC000 /* Error Type */
772 
773 /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
774 /* EBIU_AMGCTL Masks */
775 #define AMCKEN 0x0001 /* Enable CLKOUT */
776 #define AMBEN_NONE 0x0000 /* All Banks Disabled */
777 #define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
778 #define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
779 #define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
780 #define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
781 
782 /* EBIU_AMBCTL0 Masks */
783 #define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
784 #define B0RDYPOL 0x00000002 /* B0 RDY Active High */
785 #define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
786 #define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
787 #define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
788 #define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
789 #define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
790 #define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
791 #define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
792 #define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
793 #define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
794 #define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
795 #define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
796 #define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
797 #define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
798 #define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
799 #define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
800 #define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
801 #define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
802 #define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
803 #define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
804 #define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
805 #define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
806 #define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
807 #define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
808 #define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
809 #define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
810 #define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
811 #define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
812 #define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
813 #define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
814 #define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
815 #define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
816 #define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
817 #define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
818 #define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
819 #define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
820 #define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
821 #define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
822 #define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
823 #define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
824 #define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
825 #define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
826 #define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
827 
828 #define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
829 #define B1RDYPOL 0x00020000 /* B1 RDY Active High */
830 #define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
831 #define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
832 #define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
833 #define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
834 #define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
835 #define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
836 #define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
837 #define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
838 #define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
839 #define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
840 #define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
841 #define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
842 #define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
843 #define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
844 #define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
845 #define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
846 #define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
847 #define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
848 #define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
849 #define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
850 #define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
851 #define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
852 #define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
853 #define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
854 #define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
855 #define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
856 #define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
857 #define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
858 #define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
859 #define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
860 #define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
861 #define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
862 #define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
863 #define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
864 #define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
865 #define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
866 #define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
867 #define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
868 #define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
869 #define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
870 #define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
871 #define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
872 
873 /* EBIU_AMBCTL1 Masks */
874 #define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
875 #define B2RDYPOL 0x00000002 /* B2 RDY Active High */
876 #define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
877 #define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
878 #define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
879 #define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
880 #define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
881 #define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
882 #define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
883 #define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
884 #define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
885 #define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
886 #define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
887 #define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
888 #define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
889 #define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
890 #define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
891 #define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
892 #define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
893 #define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
894 #define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
895 #define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
896 #define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
897 #define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
898 #define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
899 #define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
900 #define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
901 #define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
902 #define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
903 #define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
904 #define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
905 #define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
906 #define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
907 #define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
908 #define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
909 #define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
910 #define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
911 #define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
912 #define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
913 #define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
914 #define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
915 #define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
916 #define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
917 #define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
918 
919 #define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
920 #define B3RDYPOL 0x00020000 /* B3 RDY Active High */
921 #define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
922 #define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
923 #define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
924 #define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
925 #define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
926 #define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
927 #define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
928 #define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
929 #define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
930 #define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
931 #define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
932 #define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
933 #define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
934 #define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
935 #define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
936 #define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
937 #define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
938 #define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
939 #define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
940 #define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
941 #define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
942 #define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
943 #define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
944 #define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
945 #define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
946 #define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
947 #define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
948 #define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
949 #define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
950 #define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
951 #define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
952 #define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
953 #define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
954 #define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
955 #define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
956 #define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
957 #define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
958 #define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
959 #define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
960 #define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
961 #define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
962 #define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
963 
964 
965 /* ********************** SDRAM CONTROLLER MASKS **********************************************/
966 /* EBIU_SDGCTL Masks */
967 #define SCTLE 0x00000001 /* Enable SDRAM Signals */
968 #define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
969 #define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
970 #define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
971 #define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
972 #define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
973 #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
974 #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
975 #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
976 #define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
977 #define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
978 #define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
979 #define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
980 #define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
981 #define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
982 #define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
983 #define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
984 #define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
985 #define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
986 #define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
987 #define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
988 #define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
989 #define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
990 #define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
991 #define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
992 #define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
993 #define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
994 #define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
995 #define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
996 #define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
997 #define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
998 #define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
999 #define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
1000 #define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
1001 #define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
1002 #define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
1003 #define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
1004 #define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
1005 #define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
1006 #define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
1007 #define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
1008 #define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
1009 #define EBUFE 0x02000000 /* Enable External Buffering Timing */
1010 #define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
1011 #define EMREN 0x10000000 /* Extended Mode Register Enable */
1012 #define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
1013 #define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
1014 
1015 /* EBIU_SDBCTL Masks */
1016 #define EBE 0x0001 /* Enable SDRAM External Bank */
1017 #define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
1018 #define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
1019 #define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
1020 #define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
1021 #define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */
1022 #define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */
1023 #define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
1024 #define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
1025 #define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
1026 #define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
1027 
1028 /* EBIU_SDSTAT Masks */
1029 #define SDCI 0x0001 /* SDRAM Controller Idle */
1030 #define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
1031 #define SDPUA 0x0004 /* SDRAM Power-Up Active */
1032 #define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
1033 #define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
1034 #define BGSTAT 0x0020 /* Bus Grant Status */
1035 
1036 
1037 /* ************************** DMA CONTROLLER MASKS ********************************/
1038 
1039 /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
1040 #define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
1041 #define PMAP 0xF000 /* Peripheral Mapped To This Channel */
1042 #define PMAP_PPI 0x0000 /* PPI Port DMA */
1043 #define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
1044 #define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
1045 #define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
1046 #define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
1047 #define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
1048 #define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
1049 #define PMAP_SPI 0x7000 /* SPI Port DMA */
1050 #define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
1051 #define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
1052 #define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
1053 #define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
1054 
1055 /* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
1056 /* PPI_CONTROL Masks */
1057 #define PORT_EN 0x0001 /* PPI Port Enable */
1058 #define PORT_DIR 0x0002 /* PPI Port Direction */
1059 #define XFR_TYPE 0x000C /* PPI Transfer Type */
1060 #define PORT_CFG 0x0030 /* PPI Port Configuration */
1061 #define FLD_SEL 0x0040 /* PPI Active Field Select */
1062 #define PACK_EN 0x0080 /* PPI Packing Mode */
1063 #define DMA32 0x0100 /* PPI 32-bit DMA Enable */
1064 #define SKIP_EN 0x0200 /* PPI Skip Element Enable */
1065 #define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
1066 #define DLEN_8 0x0000 /* Data Length = 8 Bits */
1067 #define DLEN_10 0x0800 /* Data Length = 10 Bits */
1068 #define DLEN_11 0x1000 /* Data Length = 11 Bits */
1069 #define DLEN_12 0x1800 /* Data Length = 12 Bits */
1070 #define DLEN_13 0x2000 /* Data Length = 13 Bits */
1071 #define DLEN_14 0x2800 /* Data Length = 14 Bits */
1072 #define DLEN_15 0x3000 /* Data Length = 15 Bits */
1073 #define DLEN_16 0x3800 /* Data Length = 16 Bits */
1074 #define DLENGTH 0x3800 /* PPI Data Length */
1075 #define POLC 0x4000 /* PPI Clock Polarity */
1076 #define POLS 0x8000 /* PPI Frame Sync Polarity */
1077 
1078 /* PPI_STATUS Masks */
1079 #define FLD 0x0400 /* Field Indicator */
1080 #define FT_ERR 0x0800 /* Frame Track Error */
1081 #define OVR 0x1000 /* FIFO Overflow Error */
1082 #define UNDR 0x2000 /* FIFO Underrun Error */
1083 #define ERR_DET 0x4000 /* Error Detected Indicator */
1084 #define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
1085 
1086 
1087 /* Omit CAN masks from defBF534.h */
1088 
1089 /* ******************* PIN CONTROL REGISTER MASKS ************************/
1090 /* PORT_MUX Masks */
1091 #define PJSE 0x0001 /* Port J SPI/SPORT Enable */
1092 #define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */
1093 #define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */
1094 
1095 #define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */
1096 #define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */
1097 #define PJCE_CAN 0x0002 /* Enable CAN RX/TX */
1098 #define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */
1099 
1100 #define PFDE 0x0008 /* Port F DMA Request Enable */
1101 #define PFDE_UART 0x0000 /* Enable UART0 RX/TX */
1102 #define PFDE_DMA 0x0008 /* Enable DMAR1:0 */
1103 
1104 #define PFTE 0x0010 /* Port F Timer Enable */
1105 #define PFTE_UART 0x0000 /* Enable UART1 RX/TX */
1106 #define PFTE_TIMER 0x0010 /* Enable TMR7:6 */
1107 
1108 #define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */
1109 #define PFS6E_TIMER 0x0000 /* Enable TMR5 */
1110 #define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */
1111 
1112 #define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */
1113 #define PFS5E_TIMER 0x0000 /* Enable TMR4 */
1114 #define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */
1115 
1116 #define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */
1117 #define PFS4E_TIMER 0x0000 /* Enable TMR3 */
1118 #define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */
1119 
1120 #define PFFE 0x0100 /* Port F PPI Frame Sync Enable */
1121 #define PFFE_TIMER 0x0000 /* Enable TMR2 */
1122 #define PFFE_PPI 0x0100 /* Enable PPI FS3 */
1123 
1124 #define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */
1125 #define PGSE_PPI 0x0000 /* Enable PPI D9:8 */
1126 #define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */
1127 
1128 #define PGRE 0x0400 /* Port G SPORT1 Receive Enable */
1129 #define PGRE_PPI 0x0000 /* Enable PPI D12:10 */
1130 #define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */
1131 
1132 #define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */
1133 #define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
1134 #define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
1135 
1136 /* entry addresses of the user-callable Boot ROM functions */
1137 
1138 #define _BOOTROM_RESET 0xEF000000
1139 #define _BOOTROM_FINAL_INIT 0xEF000002
1140 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006
1141 #define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
1142 #define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
1143 #define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
1144 #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
1145 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
1146 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
1147 
1148 /* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
1149 #define PGDE_UART PFDE_UART
1150 #define PGDE_DMA PFDE_DMA
1151 #define CKELOW SCKELOW
1152 
1153 /* ==== end from defBF534.h ==== */
1154 
1155 /* HOST Port Registers */
1156 
1157 #define HOST_CONTROL 0xffc03400 /* HOST Control Register */
1158 #define HOST_STATUS 0xffc03404 /* HOST Status Register */
1159 #define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */
1160 
1161 /* Counter Registers */
1162 
1163 #define CNT_CONFIG 0xffc03500 /* Configuration Register */
1164 #define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */
1165 #define CNT_STATUS 0xffc03508 /* Status Register */
1166 #define CNT_COMMAND 0xffc0350c /* Command Register */
1167 #define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */
1168 #define CNT_COUNTER 0xffc03514 /* Counter Register */
1169 #define CNT_MAX 0xffc03518 /* Maximal Count Register */
1170 #define CNT_MIN 0xffc0351c /* Minimal Count Register */
1171 
1172 /* OTP/FUSE Registers */
1173 
1174 #define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */
1175 #define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */
1176 #define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */
1177 #define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */
1178 
1179 /* Security Registers */
1180 
1181 #define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */
1182 #define SECURE_CONTROL 0xffc03624 /* Secure Control */
1183 #define SECURE_STATUS 0xffc03628 /* Secure Status */
1184 
1185 /* OTP Read/Write Data Buffer Registers */
1186 
1187 #define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1188 #define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1189 #define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1190 #define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
1191 
1192 /* NFC Registers */
1193 
1194 #define NFC_CTL 0xffc03700 /* NAND Control Register */
1195 #define NFC_STAT 0xffc03704 /* NAND Status Register */
1196 #define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */
1197 #define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */
1198 #define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */
1199 #define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */
1200 #define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */
1201 #define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */
1202 #define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */
1203 #define NFC_RST 0xffc03724 /* NAND ECC Reset Register */
1204 #define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */
1205 #define NFC_READ 0xffc0372c /* NAND Read Data Register */
1206 #define NFC_ADDR 0xffc03740 /* NAND Address Register */
1207 #define NFC_CMD 0xffc03744 /* NAND Command Register */
1208 #define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */
1209 #define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */
1210 
1211 /* ********************************************************** */
1212 /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
1213 /* and MULTI BIT READ MACROS */
1214 /* ********************************************************** */
1215 
1216 /* Bit masks for HOST_CONTROL */
1217 
1218 #define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
1219 #define HOST_CNTR_nHOST_EN 0x0
1220 #define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
1221 #define HOST_CNTR_nHOST_END 0x0
1222 #define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
1223 #define HOST_CNTR_nDATA_SIZE 0x0
1224 #define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
1225 #define HOST_CNTR_nHOST_RST 0x0
1226 #define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
1227 #define HOST_CNTR_nHRDY_OVR 0x0
1228 #define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
1229 #define HOST_CNTR_nINT_MODE 0x0
1230 #define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
1231 #define HOST_CNTR_ nBT_EN 0x0
1232 #define HOST_CNTR_EHW 0x100 /* Enable Host Write */
1233 #define HOST_CNTR_nEHW 0x0
1234 #define HOST_CNTR_EHR 0x200 /* Enable Host Read */
1235 #define HOST_CNTR_nEHR 0x0
1236 #define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
1237 #define HOST_CNTR_nBDR 0x0
1238 
1239 /* Bit masks for HOST_STATUS */
1240 
1241 #define HOST_STAT_READY 0x1 /* DMA Ready */
1242 #define HOST_STAT_nREADY 0x0
1243 #define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
1244 #define HOST_STAT_nFIFOFULL 0x0
1245 #define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
1246 #define HOST_STAT_nFIFOEMPTY 0x0
1247 #define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
1248 #define HOST_STAT_nCOMPLETE 0x0
1249 #define HOST_STAT_HSHK 0x10 /* Host Handshake */
1250 #define HOST_STAT_nHSHK 0x0
1251 #define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
1252 #define HOST_STAT_nTIMEOUT 0x0
1253 #define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
1254 #define HOST_STAT_nHIRQ 0x0
1255 #define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
1256 #define HOST_STAT_nALLOW_CNFG 0x0
1257 #define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
1258 #define HOST_STAT_nDMA_DIR 0x0
1259 #define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
1260 #define HOST_STAT_nBTE 0x0
1261 #define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
1262 #define HOST_STAT_nHOSTRD_DONE 0x0
1263 
1264 /* Bit masks for HOST_TIMEOUT */
1265 
1266 #define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
1267 
1268 /* Bit masks for SECURE_SYSSWT */
1269 
1270 #define EMUDABL 0x1 /* Emulation Disable. */
1271 #define nEMUDABL 0x0
1272 #define RSTDABL 0x2 /* Reset Disable */
1273 #define nRSTDABL 0x0
1274 #define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
1275 #define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
1276 #define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
1277 #define DMA0OVR 0x800 /* DMA0 Memory Access Override */
1278 #define nDMA0OVR 0x0
1279 #define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
1280 #define nDMA1OVR 0x0
1281 #define EMUOVR 0x4000 /* Emulation Override */
1282 #define nEMUOVR 0x0
1283 #define OTPSEN 0x8000 /* OTP Secrets Enable. */
1284 #define nOTPSEN 0x0
1285 #define L2DABL 0x70000 /* L2 Memory Disable. */
1286 
1287 /* Bit masks for SECURE_CONTROL */
1288 
1289 #define SECURE0 0x1 /* SECURE 0 */
1290 #define nSECURE0 0x0
1291 #define SECURE1 0x2 /* SECURE 1 */
1292 #define nSECURE1 0x0
1293 #define SECURE2 0x4 /* SECURE 2 */
1294 #define nSECURE2 0x0
1295 #define SECURE3 0x8 /* SECURE 3 */
1296 #define nSECURE3 0x0
1297 
1298 /* Bit masks for SECURE_STATUS */
1299 
1300 #define SECMODE 0x3 /* Secured Mode Control State */
1301 #define NMI 0x4 /* Non Maskable Interrupt */
1302 #define nNMI 0x0
1303 #define AFVALID 0x8 /* Authentication Firmware Valid */
1304 #define nAFVALID 0x0
1305 #define AFEXIT 0x10 /* Authentication Firmware Exit */
1306 #define nAFEXIT 0x0
1307 #define SECSTAT 0xe0 /* Secure Status */
1308 
1309 #endif /* _DEF_BF522_H */
Generated on Thu Jan 10 2013 13:04:37 for Linux Kernel by   doxygen 1.8.2