Linux Kernel
3.7.1
Main Page
Related Pages
Modules
Namespaces
Data Structures
Files
File List
Globals
All
Data Structures
Namespaces
Files
Functions
Variables
Typedefs
Enumerations
Enumerator
Macros
Groups
Pages
arch
arm
nwfpe
fpopcode.h
Go to the documentation of this file.
1
/*
2
NetWinder Floating Point Emulator
3
(c) Rebel.COM, 1998,1999
4
(c) Philip Blundell, 2001
5
6
Direct questions, comments to Scott Bambrough <
[email protected]
>
7
8
This program is free software; you can redistribute it and/or modify
9
it under the terms of the GNU General Public License as published by
10
the Free Software Foundation; either version 2 of the License, or
11
(at your option) any later version.
12
13
This program is distributed in the hope that it will be useful,
14
but WITHOUT ANY WARRANTY; without even the implied warranty of
15
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16
GNU General Public License for more details.
17
18
You should have received a copy of the GNU General Public License
19
along with this program; if not, write to the Free Software
20
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21
*/
22
23
#ifndef __FPOPCODE_H__
24
#define __FPOPCODE_H__
25
26
27
/*
28
ARM Floating Point Instruction Classes
29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
30
|c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT
31
|c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|1|0| o f f s e t | CPDT (copro 2)
32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
33
|c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO
34
|c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT
35
|c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons
36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
37
38
CPDT data transfer instructions
39
LDF, STF, LFM (copro 2), SFM (copro 2)
40
41
CPDO dyadic arithmetic instructions
42
ADF, MUF, SUF, RSF, DVF, RDF,
43
POW, RPW, RMF, FML, FDV, FRD, POL
44
45
CPDO monadic arithmetic instructions
46
MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP,
47
SIN, COS, TAN, ASN, ACS, ATN, URD, NRM
48
49
CPRT joint arithmetic/data transfer instructions
50
FIX (arithmetic followed by load/store)
51
FLT (load/store followed by arithmetic)
52
CMF, CNF CMFE, CNFE (comparisons)
53
WFS, RFS (write/read floating point status register)
54
WFC, RFC (write/read floating point control register)
55
56
cond condition codes
57
P pre/post index bit: 0 = postindex, 1 = preindex
58
U up/down bit: 0 = stack grows down, 1 = stack grows up
59
W write back bit: 1 = update base register (Rn)
60
L load/store bit: 0 = store, 1 = load
61
Rn base register
62
Rd destination/source register
63
Fd floating point destination register
64
Fn floating point source register
65
Fm floating point source register or floating point constant
66
67
uv transfer length (TABLE 1)
68
wx register count (TABLE 2)
69
abcd arithmetic opcode (TABLES 3 & 4)
70
ef destination size (rounding precision) (TABLE 5)
71
gh rounding mode (TABLE 6)
72
j dyadic/monadic bit: 0 = dyadic, 1 = monadic
73
i constant bit: 1 = constant (TABLE 6)
74
*/
75
76
/*
77
TABLE 1
78
+-------------------------+---+---+---------+---------+
79
| Precision | u | v | FPSR.EP | length |
80
+-------------------------+---+---+---------+---------+
81
| Single | 0 | 0 | x | 1 words |
82
| Double | 1 | 1 | x | 2 words |
83
| Extended | 1 | 1 | x | 3 words |
84
| Packed decimal | 1 | 1 | 0 | 3 words |
85
| Expanded packed decimal | 1 | 1 | 1 | 4 words |
86
+-------------------------+---+---+---------+---------+
87
Note: x = don't care
88
*/
89
90
/*
91
TABLE 2
92
+---+---+---------------------------------+
93
| w | x | Number of registers to transfer |
94
+---+---+---------------------------------+
95
| 0 | 1 | 1 |
96
| 1 | 0 | 2 |
97
| 1 | 1 | 3 |
98
| 0 | 0 | 4 |
99
+---+---+---------------------------------+
100
*/
101
102
/*
103
TABLE 3: Dyadic Floating Point Opcodes
104
+---+---+---+---+----------+-----------------------+-----------------------+
105
| a | b | c | d | Mnemonic | Description | Operation |
106
+---+---+---+---+----------+-----------------------+-----------------------+
107
| 0 | 0 | 0 | 0 | ADF | Add | Fd := Fn + Fm |
108
| 0 | 0 | 0 | 1 | MUF | Multiply | Fd := Fn * Fm |
109
| 0 | 0 | 1 | 0 | SUF | Subtract | Fd := Fn - Fm |
110
| 0 | 0 | 1 | 1 | RSF | Reverse subtract | Fd := Fm - Fn |
111
| 0 | 1 | 0 | 0 | DVF | Divide | Fd := Fn / Fm |
112
| 0 | 1 | 0 | 1 | RDF | Reverse divide | Fd := Fm / Fn |
113
| 0 | 1 | 1 | 0 | POW | Power | Fd := Fn ^ Fm |
114
| 0 | 1 | 1 | 1 | RPW | Reverse power | Fd := Fm ^ Fn |
115
| 1 | 0 | 0 | 0 | RMF | Remainder | Fd := IEEE rem(Fn/Fm) |
116
| 1 | 0 | 0 | 1 | FML | Fast Multiply | Fd := Fn * Fm |
117
| 1 | 0 | 1 | 0 | FDV | Fast Divide | Fd := Fn / Fm |
118
| 1 | 0 | 1 | 1 | FRD | Fast reverse divide | Fd := Fm / Fn |
119
| 1 | 1 | 0 | 0 | POL | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm) |
120
| 1 | 1 | 0 | 1 | | undefined instruction | trap |
121
| 1 | 1 | 1 | 0 | | undefined instruction | trap |
122
| 1 | 1 | 1 | 1 | | undefined instruction | trap |
123
+---+---+---+---+----------+-----------------------+-----------------------+
124
Note: POW, RPW, POL are deprecated, and are available for backwards
125
compatibility only.
126
*/
127
128
/*
129
TABLE 4: Monadic Floating Point Opcodes
130
+---+---+---+---+----------+-----------------------+-----------------------+
131
| a | b | c | d | Mnemonic | Description | Operation |
132
+---+---+---+---+----------+-----------------------+-----------------------+
133
| 0 | 0 | 0 | 0 | MVF | Move | Fd := Fm |
134
| 0 | 0 | 0 | 1 | MNF | Move negated | Fd := - Fm |
135
| 0 | 0 | 1 | 0 | ABS | Absolute value | Fd := abs(Fm) |
136
| 0 | 0 | 1 | 1 | RND | Round to integer | Fd := int(Fm) |
137
| 0 | 1 | 0 | 0 | SQT | Square root | Fd := sqrt(Fm) |
138
| 0 | 1 | 0 | 1 | LOG | Log base 10 | Fd := log10(Fm) |
139
| 0 | 1 | 1 | 0 | LGN | Log base e | Fd := ln(Fm) |
140
| 0 | 1 | 1 | 1 | EXP | Exponent | Fd := e ^ Fm |
141
| 1 | 0 | 0 | 0 | SIN | Sine | Fd := sin(Fm) |
142
| 1 | 0 | 0 | 1 | COS | Cosine | Fd := cos(Fm) |
143
| 1 | 0 | 1 | 0 | TAN | Tangent | Fd := tan(Fm) |
144
| 1 | 0 | 1 | 1 | ASN | Arc Sine | Fd := arcsin(Fm) |
145
| 1 | 1 | 0 | 0 | ACS | Arc Cosine | Fd := arccos(Fm) |
146
| 1 | 1 | 0 | 1 | ATN | Arc Tangent | Fd := arctan(Fm) |
147
| 1 | 1 | 1 | 0 | URD | Unnormalized round | Fd := int(Fm) |
148
| 1 | 1 | 1 | 1 | NRM | Normalize | Fd := norm(Fm) |
149
+---+---+---+---+----------+-----------------------+-----------------------+
150
Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are
151
available for backwards compatibility only.
152
*/
153
154
/*
155
TABLE 5
156
+-------------------------+---+---+
157
| Rounding Precision | e | f |
158
+-------------------------+---+---+
159
| IEEE Single precision | 0 | 0 |
160
| IEEE Double precision | 0 | 1 |
161
| IEEE Extended precision | 1 | 0 |
162
| undefined (trap) | 1 | 1 |
163
+-------------------------+---+---+
164
*/
165
166
/*
167
TABLE 5
168
+---------------------------------+---+---+
169
| Rounding Mode | g | h |
170
+---------------------------------+---+---+
171
| Round to nearest (default) | 0 | 0 |
172
| Round toward plus infinity | 0 | 1 |
173
| Round toward negative infinity | 1 | 0 |
174
| Round toward zero | 1 | 1 |
175
+---------------------------------+---+---+
176
*/
177
178
/*
179
===
180
=== Definitions for load and store instructions
181
===
182
*/
183
184
/* bit masks */
185
#define BIT_PREINDEX 0x01000000
186
#define BIT_UP 0x00800000
187
#define BIT_WRITE_BACK 0x00200000
188
#define BIT_LOAD 0x00100000
189
190
/* masks for load/store */
191
#define MASK_CPDT 0x0c000000
/* data processing opcode */
192
#define MASK_OFFSET 0x000000ff
193
#define MASK_TRANSFER_LENGTH 0x00408000
194
#define MASK_REGISTER_COUNT MASK_TRANSFER_LENGTH
195
#define MASK_COPROCESSOR 0x00000f00
196
197
/* Tests for transfer length */
198
#define TRANSFER_SINGLE 0x00000000
199
#define TRANSFER_DOUBLE 0x00008000
200
#define TRANSFER_EXTENDED 0x00400000
201
#define TRANSFER_PACKED MASK_TRANSFER_LENGTH
202
203
/* Get the coprocessor number from the opcode. */
204
#define getCoprocessorNumber(opcode) ((opcode & MASK_COPROCESSOR) >> 8)
205
206
/* Get the offset from the opcode. */
207
#define getOffset(opcode) (opcode & MASK_OFFSET)
208
209
/* Tests for specific data transfer load/store opcodes. */
210
#define TEST_OPCODE(opcode,mask) (((opcode) & (mask)) == (mask))
211
212
#define LOAD_OP(opcode) TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD)
213
#define STORE_OP(opcode) ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT)
214
215
#define LDF_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
216
#define LFM_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
217
#define STF_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
218
#define SFM_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
219
220
#define PREINDEXED(opcode) ((opcode & BIT_PREINDEX) != 0)
221
#define POSTINDEXED(opcode) ((opcode & BIT_PREINDEX) == 0)
222
#define BIT_UP_SET(opcode) ((opcode & BIT_UP) != 0)
223
#define BIT_UP_CLEAR(opcode) ((opcode & BIT_DOWN) == 0)
224
#define WRITE_BACK(opcode) ((opcode & BIT_WRITE_BACK) != 0)
225
#define LOAD(opcode) ((opcode & BIT_LOAD) != 0)
226
#define STORE(opcode) ((opcode & BIT_LOAD) == 0)
227
228
/*
229
===
230
=== Definitions for arithmetic instructions
231
===
232
*/
233
/* bit masks */
234
#define BIT_MONADIC 0x00008000
235
#define BIT_CONSTANT 0x00000008
236
237
#define CONSTANT_FM(opcode) ((opcode & BIT_CONSTANT) != 0)
238
#define MONADIC_INSTRUCTION(opcode) ((opcode & BIT_MONADIC) != 0)
239
240
/* instruction identification masks */
241
#define MASK_CPDO 0x0e000000
/* arithmetic opcode */
242
#define MASK_ARITHMETIC_OPCODE 0x00f08000
243
#define MASK_DESTINATION_SIZE 0x00080080
244
245
/* dyadic arithmetic opcodes. */
246
#define ADF_CODE 0x00000000
247
#define MUF_CODE 0x00100000
248
#define SUF_CODE 0x00200000
249
#define RSF_CODE 0x00300000
250
#define DVF_CODE 0x00400000
251
#define RDF_CODE 0x00500000
252
#define POW_CODE 0x00600000
253
#define RPW_CODE 0x00700000
254
#define RMF_CODE 0x00800000
255
#define FML_CODE 0x00900000
256
#define FDV_CODE 0x00a00000
257
#define FRD_CODE 0x00b00000
258
#define POL_CODE 0x00c00000
259
/* 0x00d00000 is an invalid dyadic arithmetic opcode */
260
/* 0x00e00000 is an invalid dyadic arithmetic opcode */
261
/* 0x00f00000 is an invalid dyadic arithmetic opcode */
262
263
/* monadic arithmetic opcodes. */
264
#define MVF_CODE 0x00008000
265
#define MNF_CODE 0x00108000
266
#define ABS_CODE 0x00208000
267
#define RND_CODE 0x00308000
268
#define SQT_CODE 0x00408000
269
#define LOG_CODE 0x00508000
270
#define LGN_CODE 0x00608000
271
#define EXP_CODE 0x00708000
272
#define SIN_CODE 0x00808000
273
#define COS_CODE 0x00908000
274
#define TAN_CODE 0x00a08000
275
#define ASN_CODE 0x00b08000
276
#define ACS_CODE 0x00c08000
277
#define ATN_CODE 0x00d08000
278
#define URD_CODE 0x00e08000
279
#define NRM_CODE 0x00f08000
280
281
/*
282
===
283
=== Definitions for register transfer and comparison instructions
284
===
285
*/
286
287
#define MASK_CPRT 0x0e000010
/* register transfer opcode */
288
#define MASK_CPRT_CODE 0x00f00000
289
#define FLT_CODE 0x00000000
290
#define FIX_CODE 0x00100000
291
#define WFS_CODE 0x00200000
292
#define RFS_CODE 0x00300000
293
#define WFC_CODE 0x00400000
294
#define RFC_CODE 0x00500000
295
#define CMF_CODE 0x00900000
296
#define CNF_CODE 0x00b00000
297
#define CMFE_CODE 0x00d00000
298
#define CNFE_CODE 0x00f00000
299
300
/*
301
===
302
=== Common definitions
303
===
304
*/
305
306
/* register masks */
307
#define MASK_Rd 0x0000f000
308
#define MASK_Rn 0x000f0000
309
#define MASK_Fd 0x00007000
310
#define MASK_Fm 0x00000007
311
#define MASK_Fn 0x00070000
312
313
/* condition code masks */
314
#define CC_MASK 0xf0000000
315
#define CC_NEGATIVE 0x80000000
316
#define CC_ZERO 0x40000000
317
#define CC_CARRY 0x20000000
318
#define CC_OVERFLOW 0x10000000
319
#define CC_EQ 0x00000000
320
#define CC_NE 0x10000000
321
#define CC_CS 0x20000000
322
#define CC_HS CC_CS
323
#define CC_CC 0x30000000
324
#define CC_LO CC_CC
325
#define CC_MI 0x40000000
326
#define CC_PL 0x50000000
327
#define CC_VS 0x60000000
328
#define CC_VC 0x70000000
329
#define CC_HI 0x80000000
330
#define CC_LS 0x90000000
331
#define CC_GE 0xa0000000
332
#define CC_LT 0xb0000000
333
#define CC_GT 0xc0000000
334
#define CC_LE 0xd0000000
335
#define CC_AL 0xe0000000
336
#define CC_NV 0xf0000000
337
338
/* rounding masks/values */
339
#define MASK_ROUNDING_MODE 0x00000060
340
#define ROUND_TO_NEAREST 0x00000000
341
#define ROUND_TO_PLUS_INFINITY 0x00000020
342
#define ROUND_TO_MINUS_INFINITY 0x00000040
343
#define ROUND_TO_ZERO 0x00000060
344
345
#define MASK_ROUNDING_PRECISION 0x00080080
346
#define ROUND_SINGLE 0x00000000
347
#define ROUND_DOUBLE 0x00000080
348
#define ROUND_EXTENDED 0x00080000
349
350
/* Get the condition code from the opcode. */
351
#define getCondition(opcode) (opcode >> 28)
352
353
/* Get the source register from the opcode. */
354
#define getRn(opcode) ((opcode & MASK_Rn) >> 16)
355
356
/* Get the destination floating point register from the opcode. */
357
#define getFd(opcode) ((opcode & MASK_Fd) >> 12)
358
359
/* Get the first source floating point register from the opcode. */
360
#define getFn(opcode) ((opcode & MASK_Fn) >> 16)
361
362
/* Get the second source floating point register from the opcode. */
363
#define getFm(opcode) (opcode & MASK_Fm)
364
365
/* Get the destination register from the opcode. */
366
#define getRd(opcode) ((opcode & MASK_Rd) >> 12)
367
368
/* Get the rounding mode from the opcode. */
369
#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5)
370
371
#ifdef CONFIG_FPE_NWFPE_XP
372
static
inline
floatx80
__pure
getExtendedConstant(
const
unsigned
int
nIndex)
373
{
374
extern
const
floatx80 floatx80Constant[];
375
return
floatx80Constant[nIndex];
376
}
377
#endif
378
379
static
inline
float64
__pure
getDoubleConstant(
const
unsigned
int
nIndex)
380
{
381
extern
const
float64
float64Constant
[];
382
return
float64Constant[nIndex];
383
}
384
385
static
inline
float32
__pure
getSingleConstant(
const
unsigned
int
nIndex)
386
{
387
extern
const
float32
float32Constant
[];
388
return
float32Constant[nIndex];
389
}
390
391
static
inline
unsigned
int
getTransferLength(
const
unsigned
int
opcode
)
392
{
393
unsigned
int
nRc;
394
395
switch
(opcode &
MASK_TRANSFER_LENGTH
) {
396
case
0x00000000:
397
nRc = 1;
398
break
;
/* single precision */
399
case
0x00008000:
400
nRc = 2;
401
break
;
/* double precision */
402
case
0x00400000:
403
nRc = 3;
404
break
;
/* extended precision */
405
default
:
406
nRc = 0;
407
}
408
409
return
(nRc);
410
}
411
412
static
inline
unsigned
int
getRegisterCount(
const
unsigned
int
opcode)
413
{
414
unsigned
int
nRc;
415
416
switch
(opcode &
MASK_REGISTER_COUNT
) {
417
case
0x00000000:
418
nRc = 4;
419
break
;
420
case
0x00008000:
421
nRc = 1;
422
break
;
423
case
0x00400000:
424
nRc = 2;
425
break
;
426
case
0x00408000:
427
nRc = 3;
428
break
;
429
default
:
430
nRc = 0;
431
}
432
433
return
(nRc);
434
}
435
436
static
inline
unsigned
int
getRoundingPrecision(
const
unsigned
int
opcode)
437
{
438
unsigned
int
nRc;
439
440
switch
(opcode &
MASK_ROUNDING_PRECISION
) {
441
case
0x00000000:
442
nRc = 1;
443
break
;
444
case
0x00000080:
445
nRc = 2;
446
break
;
447
case
0x00080000:
448
nRc = 3;
449
break
;
450
default
:
451
nRc = 0;
452
}
453
454
return
(nRc);
455
}
456
457
static
inline
unsigned
int
getDestinationSize(
const
unsigned
int
opcode)
458
{
459
unsigned
int
nRc;
460
461
switch
(opcode &
MASK_DESTINATION_SIZE
) {
462
case
0x00000000:
463
nRc =
typeSingle
;
464
break
;
465
case
0x00000080:
466
nRc =
typeDouble
;
467
break
;
468
case
0x00080000:
469
nRc =
typeExtended
;
470
break
;
471
default
:
472
nRc =
typeNone
;
473
}
474
475
return
(nRc);
476
}
477
478
extern
const
float64
float64Constant
[];
479
extern
const
float32
float32Constant
[];
480
481
#endif
Generated on Thu Jan 10 2013 13:03:03 for Linux Kernel by
1.8.2
1.8.2