Linux Kernel: drivers/video/sis/initdef.h Source File

Go to the documentation of this file.
 /* $XFree86$ */
 /* $XdotOrg$ */
 /*
  * Global definitions for init.c and init301.c
  *
  * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
  *
  * If distributed as part of the Linux kernel, the following license terms
  * apply:
  *
  * * This program is free software; you can redistribute it and/or modify
  * * it under the terms of the GNU General Public License as published by
  * * the Free Software Foundation; either version 2 of the named License,
  * * or any later version.
  * *
  * * This program is distributed in the hope that it will be useful,
  * * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * * GNU General Public License for more details.
  * *
  * * You should have received a copy of the GNU General Public License
  * * along with this program; if not, write to the Free Software
  * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
  *
  * Otherwise, the following license terms apply:
  *
  * * Redistribution and use in source and binary forms, with or without
  * * modification, are permitted provided that the following conditions
  * * are met:
  * * 1) Redistributions of source code must retain the above copyright
  * *    notice, this list of conditions and the following disclaimer.
  * * 2) Redistributions in binary form must reproduce the above copyright
  * *    notice, this list of conditions and the following disclaimer in the
  * *    documentation and/or other materials provided with the distribution.
  * * 3) The name of the author may not be used to endorse or promote products
  * *    derived from this software without specific prior written permission.
  * *
  * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Author:  Thomas Winischhofer <[email protected]>
  *
  */
 
 #ifndef _INITDEF_
 #define _INITDEF_
 
 #define IS_SIS330       (SiS_Pr->ChipType == SIS_330)
 #define IS_SIS550       (SiS_Pr->ChipType == SIS_550)
 #define IS_SIS650       (SiS_Pr->ChipType == SIS_650)  /* All versions, incl 651, M65x */
 #define IS_SIS740       (SiS_Pr->ChipType == SIS_740)
 #define IS_SIS651           (SiS_Pr->SiS_SysFlags & (SF_Is651 | SF_Is652))
 #define IS_SISM650          (SiS_Pr->SiS_SysFlags & (SF_IsM650 | SF_IsM652 | SF_IsM653))
 #define IS_SIS65x               (IS_SIS651 || IS_SISM650)       /* Only special versions of 65x */
 #define IS_SIS661       (SiS_Pr->ChipType == SIS_661)
 #define IS_SIS741       (SiS_Pr->ChipType == SIS_741)
 #define IS_SIS660       (SiS_Pr->ChipType == SIS_660)
 #define IS_SIS760       (SiS_Pr->ChipType == SIS_760)
 #define IS_SIS761       (SiS_Pr->ChipType == SIS_761)
 #define IS_SIS661741660760  (IS_SIS661 || IS_SIS741 || IS_SIS660 || IS_SIS760 || IS_SIS761)
 #define IS_SIS650740            ((SiS_Pr->ChipType >= SIS_650) && (SiS_Pr->ChipType < SIS_330))
 #define IS_SIS550650740         (IS_SIS550 || IS_SIS650740)
 #define IS_SIS650740660         (IS_SIS650 || IS_SIS740 || IS_SIS661741660760)
 #define IS_SIS550650740660      (IS_SIS550 || IS_SIS650740660)
 
 #define SISGETROMW(x)       (ROMAddr[(x)] | (ROMAddr[(x)+1] << 8))
 
 /* SiS_VBType */
 #define VB_SIS301       0x0001
 #define VB_SIS301B      0x0002
 #define VB_SIS302B      0x0004
 #define VB_SIS301LV     0x0008
 #define VB_SIS302LV     0x0010
 #define VB_SIS302ELV        0x0020
 #define VB_SIS301C      0x0040
 #define VB_SIS307T      0x0080
 #define VB_SIS307LV     0x0100
 #define VB_UMC          0x4000
 #define VB_NoLCD            0x8000
 #define VB_SIS30xB      (VB_SIS301B | VB_SIS301C | VB_SIS302B | VB_SIS307T)
 #define VB_SIS30xC      (VB_SIS301C | VB_SIS307T)
 #define VB_SISTMDS      (VB_SIS301 | VB_SIS301B | VB_SIS301C | VB_SIS302B | VB_SIS307T)
 #define VB_SISLVDS      (VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SIS30xBLV        (VB_SIS30xB | VB_SISLVDS)
 #define VB_SIS30xCLV        (VB_SIS30xC | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SISVB        (VB_SIS301 | VB_SIS30xBLV)
 #define VB_SISLCDA      (VB_SIS302B | VB_SIS301C  | VB_SIS307T  | VB_SISLVDS)
 #define VB_SISTMDSLCDA      (VB_SIS301C | VB_SIS307T)
 #define VB_SISPART4SCALER   (VB_SIS301C | VB_SIS307T | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SISHIVISION      (VB_SIS301 | VB_SIS301B | VB_SIS302B)
 #define VB_SISYPBPR     (VB_SIS301C | VB_SIS307T  | VB_SIS301LV | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SISTAP4SCALER    (VB_SIS301C | VB_SIS307T | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SISPART4OVERFLOW (VB_SIS301C | VB_SIS307T | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SISPWD       (VB_SIS301C | VB_SIS307T | VB_SISLVDS)
 #define VB_SISEMI       (VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SISPOWER     (VB_SIS301C | VB_SIS307T | VB_SIS302LV | VB_SIS302ELV | VB_SIS307LV)
 #define VB_SISDUALLINK      (VB_SIS302LV | VB_SIS302ELV | VB_SIS307T | VB_SIS307LV)
 #define VB_SISVGA2      VB_SISTMDS
 #define VB_SISRAMDAC202     (VB_SIS301C | VB_SIS307T)
 
 /* VBInfo */
 #define SetSimuScanMode         0x0001   /* CR 30 */
 #define SwitchCRT2              0x0002
 #define SetCRT2ToAVIDEO         0x0004
 #define SetCRT2ToSVIDEO         0x0008
 #define SetCRT2ToSCART          0x0010
 #define SetCRT2ToLCD            0x0020
 #define SetCRT2ToRAMDAC         0x0040
 #define SetCRT2ToHiVision       0x0080          /* for SiS bridge */
 #define SetCRT2ToCHYPbPr        SetCRT2ToHiVision   /* for Chrontel   */
 #define SetNTSCTV               0x0000   /* CR 31 */
 #define SetPALTV                0x0100          /* Deprecated here, now in TVMode */
 #define SetInSlaveMode          0x0200
 #define SetNotSimuMode          0x0400
 #define SetNotSimuTVMode        SetNotSimuMode
 #define SetDispDevSwitch        0x0800
 #define SetCRT2ToYPbPr525750    0x0800
 #define LoadDACFlag             0x1000
 #define DisableCRT2Display      0x2000
 #define DriverMode              0x4000
 #define HotKeySwitch            0x8000
 #define SetCRT2ToLCDA           0x8000
 
 /* v-- Needs change in sis_vga.c if changed (GPIO) --v */
 #define SetCRT2ToTV             (SetCRT2ToYPbPr525750|SetCRT2ToHiVision|SetCRT2ToSCART|SetCRT2ToSVIDEO|SetCRT2ToAVIDEO)
 #define SetCRT2ToTVNoYPbPrHiVision (SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)
 #define SetCRT2ToTVNoHiVision   (SetCRT2ToYPbPr525750 | SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)
 
 /* SiS_ModeType */
 #define ModeText                0x00
 #define ModeCGA                 0x01
 #define ModeEGA                 0x02
 #define ModeVGA                 0x03
 #define Mode15Bpp               0x04
 #define Mode16Bpp               0x05
 #define Mode24Bpp               0x06
 #define Mode32Bpp               0x07
 
 #define ModeTypeMask            0x07
 #define IsTextMode              0x07
 
 #define DACInfoFlag             0x0018
 #define MemoryInfoFlag          0x01E0
 #define MemorySizeShift         5
 
 /* modeflag */
 #define Charx8Dot               0x0200
 #define LineCompareOff          0x0400
 #define CRT2Mode                0x0800
 #define HalfDCLK                0x1000
 #define NoSupportSimuTV         0x2000
 #define NoSupportLCDScale   0x4000 /* SiS bridge: No scaling possible (no matter what panel) */
 #define DoubleScanMode          0x8000
 
 /* Infoflag */
 #define SupportTV               0x0008
 #define SupportTV1024           0x0800
 #define SupportCHTV         0x0800
 #define Support64048060Hz       0x0800  /* Special for 640x480 LCD */
 #define SupportHiVision         0x0010
 #define SupportYPbPr750p        0x1000
 #define SupportLCD              0x0020
 #define SupportRAMDAC2          0x0040  /* All           (<= 100Mhz) */
 #define SupportRAMDAC2_135      0x0100  /* All except DH (<= 135Mhz) */
 #define SupportRAMDAC2_162      0x0200  /* B, C          (<= 162Mhz) */
 #define SupportRAMDAC2_202      0x0400  /* C             (<= 202Mhz) */
 #define InterlaceMode           0x0080
 #define SyncPP                  0x0000
 #define HaveWideTiming      0x2000  /* Have specific wide- and non-wide timing */
 #define SyncPN                  0x4000
 #define SyncNP                  0x8000
 #define SyncNN                  0xc000
 
 /* SetFlag */
 #define ProgrammingCRT2         0x0001
 #define LowModeTests        0x0002
 /* #define TVSimuMode           0x0002 - deprecated */
 /* #define RPLLDIV2XO           0x0004 - deprecated */
 #define LCDVESATiming           0x0008
 #define EnableLVDSDDA           0x0010
 #define SetDispDevSwitchFlag    0x0020
 #define CheckWinDos             0x0040
 #define SetDOSMode              0x0080
 
 /* TVMode flag */
 #define TVSetPAL        0x0001
 #define TVSetNTSCJ      0x0002
 #define TVSetPALM       0x0004
 #define TVSetPALN       0x0008
 #define TVSetCHOverScan     0x0010
 #define TVSetYPbPr525i      0x0020 /* new 0x10 */
 #define TVSetYPbPr525p      0x0040 /* new 0x20 */
 #define TVSetYPbPr750p      0x0080 /* new 0x40 */
 #define TVSetHiVision       0x0100 /* new 0x80; = 1080i, software-wise identical */
 #define TVSetTVSimuMode     0x0200 /* new 0x200, prev. 0x800 */
 #define TVRPLLDIV2XO        0x0400 /* prev 0x1000 */
 #define TVSetNTSC1024       0x0800 /* new 0x100, prev. 0x2000 */
 #define TVSet525p1024       0x1000 /* TW */
 #define TVAspect43      0x2000
 #define TVAspect169     0x4000
 #define TVAspect43LB        0x8000
 
 /* YPbPr flag (>=315, <661; converted to TVMode) */
 #define YPbPr525p               0x0001
 #define YPbPr750p               0x0002
 #define YPbPr525i               0x0004
 #define YPbPrHiVision           0x0008
 #define YPbPrModeMask           (YPbPr750p | YPbPr525p | YPbPr525i | YPbPrHiVision)
 
 /* SysFlags (to identify special versions) */
 #define SF_Is651                0x0001
 #define SF_IsM650               0x0002
 #define SF_Is652        0x0004
 #define SF_IsM652       0x0008
 #define SF_IsM653       0x0010
 #define SF_IsM661       0x0020
 #define SF_IsM741       0x0040
 #define SF_IsM760       0x0080
 #define SF_760UMA       0x4000  /* 76x: We have UMA */
 #define SF_760LFB       0x8000  /* 76x: We have LFB */
 
 /* CR32 (Newer 630, and 315 series)
 
    [0]   VB connected with CVBS
    [1]   VB connected with SVHS
    [2]   VB connected with SCART
    [3]   VB connected with LCD
    [4]   VB connected with CRT2 (secondary VGA)
    [5]   CRT1 monitor is connected
    [6]   VB connected with Hi-Vision TV
    [7]   <= 330: VB connected with DVI combo connector
          >= 661: VB connected to YPbPr
 */
 
 /* CR35 (300 series only) */
 #define TVOverScan              0x10
 #define TVOverScanShift         4
 
 /* CR35 (661 series only)
    [0]    1 = PAL, 0 = NTSC
    [1]    1 = NTSC-J (if D0 = 0)
    [2]    1 = PALM (if D0 = 1)
    [3]    1 = PALN (if D0 = 1)
    [4]    1 = Overscan (Chrontel only)
    [7:5]  (only if D2 in CR38 is set)
       000  525i
       001  525p
       010  750p
       011  1080i (or HiVision on 301, 301B)
 */
 
 /* CR37
    [0]   Set 24/18 bit (0/1) RGB to LVDS/TMDS transmitter (set by BIOS)
    [3:1] External chip
          300 series:
         001   SiS301 (never seen)
         010   LVDS
         011   LVDS + Tumpion Zurac
         100   LVDS + Chrontel 7005
         110   Chrontel 7005
       315/330 series
         001   SiS30x (never seen)
         010   LVDS
         011   LVDS + Chrontel 7019
       660 series [2:1] only:
          reserved (chip type now in CR38)
       All other combinations reserved
    [3]    661 only: Pass 1:1 data
    [4]    LVDS: 0: Panel Link expands / 1: Panel Link does not expand
           30x:  0: Bridge scales      / 1: Bridge does not scale = Panel scales (if possible)
    [5]    LCD polarity select
           0: VESA DMT Standard
       1: EDID 2.x defined
    [6]    LCD horizontal polarity select
           0: High active
       1: Low active
    [7]    LCD vertical polarity select
           0: High active
       1: Low active
 */
 
 /* CR37: LCDInfo */
 #define LCDRGB18Bit           0x0001
 #define LCDNonExpanding       0x0010
 #define LCDSync               0x0020
 #define LCDPass11             0x0100   /* 0: center screen, 1: Pass 1:1 data */
 #define LCDDualLink       0x0200
 
 #define DontExpandLCD         LCDNonExpanding
 #define LCDNonExpandingShift       4
 #define DontExpandLCDShift    LCDNonExpandingShift
 #define LCDSyncBit            0x00e0
 #define LCDSyncShift               6
 
 /* CR38 (315 series) */
 #define EnableDualEdge      0x01
 #define SetToLCDA       0x02   /* LCD channel A (301C/302B/30x(E)LV and 650+LVDS only) */
 #define EnableCHScart           0x04   /* Scart on Ch7019 (unofficial definition - TW) */
 #define EnableCHYPbPr           0x08   /* YPbPr on Ch7019 (480i HDTV); only on 650/Ch7019 systems */
 #define EnableSiSYPbPr          0x08   /* Enable YPbPr mode (30xLV/301C only) */
 #define EnableYPbPr525i         0x00   /* Enable 525i YPbPr mode (30xLV/301C only) (mask 0x30) */
 #define EnableYPbPr525p         0x10   /* Enable 525p YPbPr mode (30xLV/301C only) (mask 0x30) */
 #define EnableYPbPr750p         0x20   /* Enable 750p YPbPr mode (30xLV/301C only) (mask 0x30) */
 #define EnableYPbPr1080i        0x30   /* Enable 1080i YPbPr mode (30xLV/301C only) (mask 0x30) */
 #define EnablePALM              0x40   /* 1 = Set PALM */
 #define EnablePALN              0x80   /* 1 = Set PALN */
 #define EnableNTSCJ             EnablePALM  /* Not BIOS */
 
 /* CR38 (661 and later)
   D[7:5]  000 No VB
           001 301 series VB
       010 LVDS
       011 Chrontel 7019
       100 Conexant
   D2      Enable YPbPr output (see CR35)
   D[1:0]  LCDA (like before)
 */
 
 #define EnablePALMN             0x40   /* Romflag: 1 = Allow PALM/PALN */
 
 /* CR39 (650 only) */
 #define LCDPass1_1      0x01   /* 0: center screen, 1: pass 1:1 data output  */
 #define Enable302LV_DualLink    0x04   /* 302LV only; enable dual link */
 
 /* CR39 (661 and later)
    D[7]   LVDS (SiS or third party)
    D[1:0] YPbPr Aspect Ratio
           00 4:3 letterbox
       01 4:3
       10 16:9
       11 4:3
 */
 
 /* CR3B (651+301C)
    D[1:0] YPbPr Aspect Ratio
           ?
 */
 
 /* CR79 (315/330 series only; not 661 and later)
    [3-0] Notify driver
          0001 Mode Switch event (set by BIOS)
      0010 Epansion On/Off event
      0011 TV UnderScan/OverScan event
      0100 Set Brightness event
      0101 Set Contrast event
      0110 Set Mute event
      0111 Set Volume Up/Down event
    [4]   Enable Backlight Control by BIOS/driver
          (set by driver; set means that the BIOS should
      not touch the backlight registers because eg.
      the driver already switched off the backlight)
    [5]   PAL/NTSC (set by BIOS)
    [6]   Expansion On/Off (set by BIOS; copied to CR32[4])
    [7]   TV UnderScan/OverScan (set by BIOS)
 */
 
 /* CR7C - 661 and later
    [7]   DualEdge enabled (or: to be enabled)
    [6]   CRT2 = TV/LCD/VGA enabled (or: to be enabled)
    [5]   Init done (set at end of SiS_Init)
    {4]   LVDS LCD capabilities
    [3]   LVDS LCD capabilities
    [2]   LVDS LCD capabilities (PWD)
    [1]   LVDS LCD capabilities (PWD)
    [0]   LVDS=1, TMDS=0 (SiS or third party)
 */
 
 /* CR7E - 661 and later
    VBType:
    [7] LVDS (third party)
    [3] 301C
    [2] 302LV
    [1] 301LV
    [0] 301B
 */
 
 /* LCDResInfo */
 #define Panel300_800x600        0x01    /* CR36 */
 #define Panel300_1024x768       0x02
 #define Panel300_1280x1024      0x03
 #define Panel300_1280x960       0x04
 #define Panel300_640x480        0x05
 #define Panel300_1024x600       0x06
 #define Panel300_1152x768       0x07
 #define Panel300_1280x768       0x0a
 #define Panel300_Custom     0x0f
 #define Panel300_Barco1366      0x10
 
 #define Panel310_800x600        0x01
 #define Panel310_1024x768       0x02
 #define Panel310_1280x1024      0x03
 #define Panel310_640x480        0x04
 #define Panel310_1024x600       0x05
 #define Panel310_1152x864       0x06
 #define Panel310_1280x960       0x07
 #define Panel310_1152x768       0x08    /* LVDS only */
 #define Panel310_1400x1050      0x09
 #define Panel310_1280x768       0x0a
 #define Panel310_1600x1200      0x0b
 #define Panel310_320x240_2      0x0c    /* xSTN */
 #define Panel310_320x240_3      0x0d    /* xSTN */
 #define Panel310_320x240_1      0x0e    /* xSTN - This is fake, can be any */
 #define Panel310_Custom     0x0f
 
 #define Panel661_800x600        0x01
 #define Panel661_1024x768       0x02
 #define Panel661_1280x1024      0x03
 #define Panel661_640x480        0x04
 #define Panel661_1024x600       0x05
 #define Panel661_1152x864       0x06
 #define Panel661_1280x960       0x07
 #define Panel661_1280x854       0x08
 #define Panel661_1400x1050      0x09
 #define Panel661_1280x768       0x0a
 #define Panel661_1600x1200      0x0b
 #define Panel661_1280x800       0x0c
 #define Panel661_1680x1050      0x0d
 #define Panel661_1280x720       0x0e
 #define Panel661_Custom     0x0f
 
 #define Panel_800x600           0x01    /* Unified values */
 #define Panel_1024x768          0x02    /* MUST match BIOS values from 0-e */
 #define Panel_1280x1024         0x03
 #define Panel_640x480           0x04
 #define Panel_1024x600          0x05
 #define Panel_1152x864          0x06
 #define Panel_1280x960          0x07
 #define Panel_1152x768          0x08    /* LVDS only */
 #define Panel_1400x1050         0x09
 #define Panel_1280x768          0x0a    /* 30xB/C and LVDS only (BIOS: all) */
 #define Panel_1600x1200         0x0b
 #define Panel_1280x800      0x0c    /* 661etc (TMDS) */
 #define Panel_1680x1050         0x0d    /* 661etc  */
 #define Panel_1280x720      0x0e    /* 661etc  */
 #define Panel_Custom        0x0f    /* MUST BE 0x0f (for DVI DDC detection) */
 #define Panel_320x240_1         0x10    /* SiS 550 xSTN */
 #define Panel_Barco1366         0x11
 #define Panel_848x480       0x12
 #define Panel_320x240_2     0x13    /* SiS 550 xSTN */
 #define Panel_320x240_3     0x14    /* SiS 550 xSTN */
 #define Panel_1280x768_2        0x15    /* 30xLV */
 #define Panel_1280x768_3        0x16    /* (unused) */
 #define Panel_1280x800_2    0x17    /* 30xLV */
 #define Panel_856x480       0x18
 #define Panel_1280x854      0x19    /* 661etc */
 
 /* Index in ModeResInfo table */
 #define SIS_RI_320x200    0
 #define SIS_RI_320x240    1
 #define SIS_RI_320x400    2
 #define SIS_RI_400x300    3
 #define SIS_RI_512x384    4
 #define SIS_RI_640x400    5
 #define SIS_RI_640x480    6
 #define SIS_RI_800x600    7
 #define SIS_RI_1024x768   8
 #define SIS_RI_1280x1024  9
 #define SIS_RI_1600x1200 10
 #define SIS_RI_1920x1440 11
 #define SIS_RI_2048x1536 12
 #define SIS_RI_720x480   13
 #define SIS_RI_720x576   14
 #define SIS_RI_1280x960  15
 #define SIS_RI_800x480   16
 #define SIS_RI_1024x576  17
 #define SIS_RI_1280x720  18
 #define SIS_RI_856x480   19
 #define SIS_RI_1280x768  20
 #define SIS_RI_1400x1050 21
 #define SIS_RI_1152x864  22  /* Up to here SiS conforming */
 #define SIS_RI_848x480   23
 #define SIS_RI_1360x768  24
 #define SIS_RI_1024x600  25
 #define SIS_RI_1152x768  26
 #define SIS_RI_768x576   27
 #define SIS_RI_1360x1024 28
 #define SIS_RI_1680x1050 29
 #define SIS_RI_1280x800  30
 #define SIS_RI_1920x1080 31
 #define SIS_RI_960x540   32
 #define SIS_RI_960x600   33
 #define SIS_RI_1280x854  34
 
 /* CR5F */
 #define IsM650                  0x80
 
 /* Timing data */
 #define NTSCHT                  1716
 #define NTSC2HT                 1920
 #define NTSCVT                  525
 #define PALHT                   1728
 #define PALVT                   625
 #define StHiTVHT                892
 #define StHiTVVT                1126
 #define StHiTextTVHT            1000
 #define StHiTextTVVT            1126
 #define ExtHiTVHT               2100
 #define ExtHiTVVT               1125
 
 /* Indices in (VB)VCLKData tables */
 
 #define VCLK28                  0x00   /* Index in VCLKData table (300 and 315) */
 #define VCLK40                  0x04   /* Index in VCLKData table (300 and 315) */
 #define VCLK65_300              0x09   /* Index in VCLKData table (300) */
 #define VCLK108_2_300           0x14   /* Index in VCLKData table (300) */
 #define VCLK81_300      0x3f   /* Index in VCLKData table (300) */
 #define VCLK108_3_300           0x42   /* Index in VCLKData table (300) */
 #define VCLK100_300             0x43   /* Index in VCLKData table (300) */
 #define VCLK34_300              0x3d   /* Index in VCLKData table (300) */
 #define VCLK_CUSTOM_300     0x47
 
 #define VCLK65_315              0x0b   /* Indices in (VB)VCLKData table (315) */
 #define VCLK108_2_315           0x19
 #define VCLK81_315      0x5b
 #define VCLK162_315             0x5e
 #define VCLK108_3_315           0x45
 #define VCLK100_315             0x46
 #define VCLK34_315              0x55
 #define VCLK68_315      0x0d
 #define VCLK_1280x800_315_2 0x5c
 #define VCLK121_315     0x5d
 #define VCLK130_315     0x72
 #define VCLK_1280x720       0x5f
 #define VCLK_1280x768_2     0x60
 #define VCLK_1280x768_3     0x61   /* (unused?) */
 #define VCLK_CUSTOM_315     0x62
 #define VCLK_1280x720_2     0x63
 #define VCLK_720x480        0x67
 #define VCLK_720x576        0x68
 #define VCLK_768x576        0x68
 #define VCLK_848x480        0x65
 #define VCLK_856x480        0x66
 #define VCLK_800x480        0x65
 #define VCLK_1024x576       0x51
 #define VCLK_1152x864       0x64
 #define VCLK_1360x768       0x58
 #define VCLK_1280x800_315   0x6c
 #define VCLK_1280x854       0x76
 
 #define TVCLKBASE_300       0x21   /* Indices on TV clocks in VCLKData table (300) */
 #define TVCLKBASE_315           0x3a   /* Indices on TV clocks in (VB)VCLKData table (315) */
 #define TVVCLKDIV2              0x00   /* Index relative to TVCLKBASE */
 #define TVVCLK                  0x01   /* Index relative to TVCLKBASE */
 #define HiTVVCLKDIV2            0x02   /* Index relative to TVCLKBASE */
 #define HiTVVCLK                0x03   /* Index relative to TVCLKBASE */
 #define HiTVSimuVCLK            0x04   /* Index relative to TVCLKBASE */
 #define HiTVTextVCLK            0x05   /* Index relative to TVCLKBASE */
 #define YPbPr750pVCLK       0x25   /* Index relative to TVCLKBASE; was 0x0f NOT relative */
 
 /* ------------------------------ */
 
 #define SetSCARTOutput          0x01
 
 #define HotPlugFunction         0x08
 
 #define StStructSize            0x06
 
 #define SIS_VIDEO_CAPTURE       0x00 - 0x30
 #define SIS_VIDEO_PLAYBACK      0x02 - 0x30
 #define SIS_CRT2_PORT_04        0x04 - 0x30
 #define SIS_CRT2_PORT_10        0x10 - 0x30
 #define SIS_CRT2_PORT_12        0x12 - 0x30
 #define SIS_CRT2_PORT_14        0x14 - 0x30
 
 #define ADR_CRT2PtrData         0x20E
 #define offset_Zurac            0x210   /* TW: Trumpion Zurac data pointer */
 #define ADR_LVDSDesPtrData      0x212
 #define ADR_LVDSCRT1DataPtr     0x214
 #define ADR_CHTVVCLKPtr         0x216
 #define ADR_CHTVRegDataPtr      0x218
 
 #define LCDDataLen              8
 #define HiTVDataLen             12
 #define TVDataLen               16
 
 #define LVDSDataLen             6
 #define LVDSDesDataLen          3
 #define ActiveNonExpanding      0x40
 #define ActiveNonExpandingShift 6
 #define ActivePAL               0x20
 #define ActivePALShift          5
 #define ModeSwitchStatus        0x0F
 #define SoftTVType              0x40
 #define SoftSettingAddr         0x52
 #define ModeSettingAddr         0x53
 
 #define _PanelType00             0x00
 #define _PanelType01             0x08
 #define _PanelType02             0x10
 #define _PanelType03             0x18
 #define _PanelType04             0x20
 #define _PanelType05             0x28
 #define _PanelType06             0x30
 #define _PanelType07             0x38
 #define _PanelType08             0x40
 #define _PanelType09             0x48
 #define _PanelType0A             0x50
 #define _PanelType0B             0x58
 #define _PanelType0C             0x60
 #define _PanelType0D             0x68
 #define _PanelType0E             0x70
 #define _PanelType0F             0x78
 
 #define PRIMARY_VGA         0     /* 1: SiS is primary vga 0:SiS is secondary vga */
 
 #define BIOSIDCodeAddr          0x235  /* Offsets to ptrs in BIOS image */
 #define OEMUtilIDCodeAddr       0x237
 #define VBModeIDTableAddr       0x239
 #define OEMTVPtrAddr            0x241
 #define PhaseTableAddr          0x243
 #define NTSCFilterTableAddr     0x245
 #define PALFilterTableAddr      0x247
 #define OEMLCDPtr_1Addr         0x249
 #define OEMLCDPtr_2Addr         0x24B
 #define LCDHPosTable_1Addr      0x24D
 #define LCDHPosTable_2Addr      0x24F
 #define LCDVPosTable_1Addr      0x251
 #define LCDVPosTable_2Addr      0x253
 #define OEMLCDPIDTableAddr      0x255
 
 #define VBModeStructSize        5
 #define PhaseTableSize          4
 #define FilterTableSize         4
 #define LCDHPosTableSize        7
 #define LCDVPosTableSize        5
 #define OEMLVDSPIDTableSize     4
 #define LVDSHPosTableSize       4
 #define LVDSVPosTableSize       6
 
 #define VB_ModeID               0
 #define VB_TVTableIndex         1
 #define VB_LCDTableIndex        2
 #define VB_LCDHIndex            3
 #define VB_LCDVIndex            4
 
 #define OEMLCDEnable            0x0001
 #define OEMLCDDelayEnable       0x0002
 #define OEMLCDPOSEnable         0x0004
 #define OEMTVEnable             0x0100
 #define OEMTVDelayEnable        0x0200
 #define OEMTVFlickerEnable      0x0400
 #define OEMTVPhaseEnable        0x0800
 #define OEMTVFilterEnable       0x1000
 
 #define OEMLCDPanelIDSupport    0x0080
 
 /*
   =============================================================
           for 315 series (old data layout)
   =============================================================
 */
 #define SoftDRAMType        0x80
 #define SoftSetting_OFFSET  0x52
 #define SR07_OFFSET  0x7C
 #define SR15_OFFSET  0x7D
 #define SR16_OFFSET  0x81
 #define SR17_OFFSET  0x85
 #define SR19_OFFSET  0x8D
 #define SR1F_OFFSET  0x99
 #define SR21_OFFSET  0x9A
 #define SR22_OFFSET  0x9B
 #define SR23_OFFSET  0x9C
 #define SR24_OFFSET  0x9D
 #define SR25_OFFSET  0x9E
 #define SR31_OFFSET  0x9F
 #define SR32_OFFSET  0xA0
 #define SR33_OFFSET  0xA1
 
 #define CR40_OFFSET  0xA2
 #define SR25_1_OFFSET  0xF6
 #define CR49_OFFSET  0xF7
 
 #define VB310Data_1_2_Offset  0xB6
 #define VB310Data_4_D_Offset  0xB7
 #define VB310Data_4_E_Offset  0xB8
 #define VB310Data_4_10_Offset 0xBB
 
 #define RGBSenseDataOffset    0xBD
 #define YCSenseDataOffset     0xBF
 #define VideoSenseDataOffset  0xC1
 #define OutputSelectOffset    0xF3
 
 #define ECLK_MCLK_DISTANCE  0x14
 #define VBIOSTablePointerStart    0x100
 #define StandTablePtrOffset       VBIOSTablePointerStart+0x02
 #define EModeIDTablePtrOffset     VBIOSTablePointerStart+0x04
 #define CRT1TablePtrOffset        VBIOSTablePointerStart+0x06
 #define ScreenOffsetPtrOffset     VBIOSTablePointerStart+0x08
 #define VCLKDataPtrOffset         VBIOSTablePointerStart+0x0A
 #define MCLKDataPtrOffset         VBIOSTablePointerStart+0x0E
 #define CRT2PtrDataPtrOffset      VBIOSTablePointerStart+0x10
 #define TVAntiFlickPtrOffset      VBIOSTablePointerStart+0x12
 #define TVDelayPtr1Offset         VBIOSTablePointerStart+0x14
 #define TVPhaseIncrPtr1Offset     VBIOSTablePointerStart+0x16
 #define TVYFilterPtr1Offset       VBIOSTablePointerStart+0x18
 #define LCDDelayPtr1Offset        VBIOSTablePointerStart+0x20
 #define TVEdgePtr1Offset          VBIOSTablePointerStart+0x24
 #define CRT2Delay1Offset          VBIOSTablePointerStart+0x28
 
 #endif