iomux-v1.h

Go to the documentation of this file.

/*
 * Copyright (C) 2008 by Sascha Hauer <[email protected]>
 * Copyright (C) 2009 by Holger Schurig <[email protected]>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 */
#ifndef __MACH_IOMUX_V1_H__
#define __MACH_IOMUX_V1_H__

/*
*  GPIO Module and I/O Multiplexer
*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
*/
#define MXC_DDIR(x) (0x00 + ((x) << 8))
#define MXC_OCR1(x) (0x04 + ((x) << 8))
#define MXC_OCR2(x) (0x08 + ((x) << 8))
#define MXC_ICONFA1(x)  (0x0c + ((x) << 8))
#define MXC_ICONFA2(x)  (0x10 + ((x) << 8))
#define MXC_ICONFB1(x)  (0x14 + ((x) << 8))
#define MXC_ICONFB2(x)  (0x18 + ((x) << 8))
#define MXC_DR(x)   (0x1c + ((x) << 8))
#define MXC_GIUS(x) (0x20 + ((x) << 8))
#define MXC_SSR(x)  (0x24 + ((x) << 8))
#define MXC_ICR1(x) (0x28 + ((x) << 8))
#define MXC_ICR2(x) (0x2c + ((x) << 8))
#define MXC_IMR(x)  (0x30 + ((x) << 8))
#define MXC_ISR(x)  (0x34 + ((x) << 8))
#define MXC_GPR(x)  (0x38 + ((x) << 8))
#define MXC_SWR(x)  (0x3c + ((x) << 8))
#define MXC_PUEN(x) (0x40 + ((x) << 8))

#define MX1_NUM_GPIO_PORT   4
#define MX21_NUM_GPIO_PORT  6
#define MX27_NUM_GPIO_PORT  6

#define GPIO_PIN_MASK 0x1f

#define GPIO_PORT_SHIFT 5
#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)

#define GPIO_PORTA  (0 << GPIO_PORT_SHIFT)
#define GPIO_PORTB  (1 << GPIO_PORT_SHIFT)
#define GPIO_PORTC  (2 << GPIO_PORT_SHIFT)
#define GPIO_PORTD  (3 << GPIO_PORT_SHIFT)
#define GPIO_PORTE  (4 << GPIO_PORT_SHIFT)
#define GPIO_PORTF  (5 << GPIO_PORT_SHIFT)

#define GPIO_OUT    (1 << 8)
#define GPIO_IN     (0 << 8)
#define GPIO_PUEN   (1 << 9)

#define GPIO_PF     (1 << 10)
#define GPIO_AF     (1 << 11)

#define GPIO_OCR_SHIFT 12
#define GPIO_OCR_MASK   (3 << GPIO_OCR_SHIFT)
#define GPIO_AIN    (0 << GPIO_OCR_SHIFT)
#define GPIO_BIN    (1 << GPIO_OCR_SHIFT)
#define GPIO_CIN    (2 << GPIO_OCR_SHIFT)
#define GPIO_GPIO   (3 << GPIO_OCR_SHIFT)

#define GPIO_AOUT_SHIFT 14
#define GPIO_AOUT_MASK  (3 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT   (0 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT_ISR   (1 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT)
#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT)

#define GPIO_BOUT_SHIFT 16
#define GPIO_BOUT_MASK  (3 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT   (0 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_ISR   (1 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)

extern int mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
        const char *label);

extern int imx_iomuxv1_init(void __iomem *base, int numports);

#endif /* __MACH_IOMUX_V1_H__ */