irqs-pbx.h

Go to the documentation of this file.

/*
 * arch/arm/mach-realview/include/mach/irqs-pbx.h
 *
 * Copyright (C) 2009 ARM Limited
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
 */

#ifndef __MACH_IRQS_PBX_H
#define __MACH_IRQS_PBX_H

#define IRQ_PBX_GIC_START           32

/*
 * PBX on-board gic irq sources
 */
#define IRQ_PBX_WATCHDOG    (IRQ_PBX_GIC_START + 0) /* Watchdog timer */
#define IRQ_PBX_SOFT        (IRQ_PBX_GIC_START + 1) /* Software interrupt */
#define IRQ_PBX_COMMRx      (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */
#define IRQ_PBX_COMMTx      (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */
#define IRQ_PBX_TIMER0_1    (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */
#define IRQ_PBX_TIMER2_3    (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */
#define IRQ_PBX_GPIO0       (IRQ_PBX_GIC_START + 6) /* GPIO 0 */
#define IRQ_PBX_GPIO1       (IRQ_PBX_GIC_START + 7) /* GPIO 1 */
#define IRQ_PBX_GPIO2       (IRQ_PBX_GIC_START + 8) /* GPIO 2 */
                                /* 9 reserved */
#define IRQ_PBX_RTC     (IRQ_PBX_GIC_START + 10)    /* Real Time Clock */
#define IRQ_PBX_SSP     (IRQ_PBX_GIC_START + 11)    /* Synchronous Serial Port */
#define IRQ_PBX_UART0       (IRQ_PBX_GIC_START + 12)    /* UART 0 on development chip */
#define IRQ_PBX_UART1       (IRQ_PBX_GIC_START + 13)    /* UART 1 on development chip */
#define IRQ_PBX_UART2       (IRQ_PBX_GIC_START + 14)    /* UART 2 on development chip */
#define IRQ_PBX_UART3       (IRQ_PBX_GIC_START + 15)    /* UART 3 on development chip */
#define IRQ_PBX_SCI     (IRQ_PBX_GIC_START + 16)    /* Smart Card Interface */
#define IRQ_PBX_MMCI0A      (IRQ_PBX_GIC_START + 17)    /* Multimedia Card 0A */
#define IRQ_PBX_MMCI0B      (IRQ_PBX_GIC_START + 18)    /* Multimedia Card 0B */
#define IRQ_PBX_AACI        (IRQ_PBX_GIC_START + 19)    /* Audio Codec */
#define IRQ_PBX_KMI0        (IRQ_PBX_GIC_START + 20)    /* Keyboard/Mouse port 0 */
#define IRQ_PBX_KMI1        (IRQ_PBX_GIC_START + 21)    /* Keyboard/Mouse port 1 */
#define IRQ_PBX_CHARLCD     (IRQ_PBX_GIC_START + 22)    /* Character LCD */
#define IRQ_PBX_CLCD        (IRQ_PBX_GIC_START + 23)    /* CLCD controller */
#define IRQ_PBX_DMAC        (IRQ_PBX_GIC_START + 24)    /* DMA controller */
#define IRQ_PBX_PWRFAIL     (IRQ_PBX_GIC_START + 25)    /* Power failure */
#define IRQ_PBX_PISMO       (IRQ_PBX_GIC_START + 26)    /* PISMO interface */
#define IRQ_PBX_DoC     (IRQ_PBX_GIC_START + 27)    /* Disk on Chip memory controller */
#define IRQ_PBX_ETH     (IRQ_PBX_GIC_START + 28)    /* Ethernet controller */
#define IRQ_PBX_USB     (IRQ_PBX_GIC_START + 29)    /* USB controller */
#define IRQ_PBX_TSPEN       (IRQ_PBX_GIC_START + 30)    /* Touchscreen pen */
#define IRQ_PBX_TSKPAD      (IRQ_PBX_GIC_START + 31)    /* Touchscreen keypad */

#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)

#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
/* ... */
#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)

/* ... */
#define IRQ_PBX_PCI0        (IRQ_PBX_GIC_START + 50)
#define IRQ_PBX_PCI1        (IRQ_PBX_GIC_START + 51)
#define IRQ_PBX_PCI2        (IRQ_PBX_GIC_START + 52)
#define IRQ_PBX_PCI3        (IRQ_PBX_GIC_START + 53)

#define IRQ_PBX_SMC     -1
#define IRQ_PBX_SCTL        -1

#define NR_GIC_PBX      1

/*
 * Only define NR_IRQS if less than NR_IRQS_PBX
 */
#define NR_IRQS_PBX     (IRQ_PBX_GIC_START + 96)

#if defined(CONFIG_MACH_REALVIEW_PBX)

#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
#undef NR_IRQS
#define NR_IRQS         NR_IRQS_PBX
#endif

#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
#undef MAX_GIC_NR
#define MAX_GIC_NR      NR_GIC_PBX
#endif

#endif  /* CONFIG_MACH_REALVIEW_PBX */

#endif  /* __MACH_IRQS_PBX_H */