kobil_sct.h

Go to the documentation of this file.

#define SUSBCRequest_SetBaudRateParityAndStopBits       1
#define SUSBCR_SBR_MASK             0xFF00
#define SUSBCR_SBR_1200             0x0100
#define SUSBCR_SBR_9600             0x0200
#define SUSBCR_SBR_19200            0x0400
#define SUSBCR_SBR_28800            0x0800
#define SUSBCR_SBR_38400            0x1000
#define SUSBCR_SBR_57600            0x2000
#define SUSBCR_SBR_115200           0x4000

#define SUSBCR_SPASB_MASK           0x0070
#define SUSBCR_SPASB_NoParity           0x0010
#define SUSBCR_SPASB_OddParity          0x0020
#define SUSBCR_SPASB_EvenParity         0x0040

#define SUSBCR_SPASB_STPMASK            0x0003
#define SUSBCR_SPASB_1StopBit           0x0001
#define SUSBCR_SPASB_2StopBits          0x0002

#define SUSBCRequest_SetStatusLinesOrQueues 2
#define SUSBCR_SSL_SETRTS           0x0001
#define SUSBCR_SSL_CLRRTS           0x0002
#define SUSBCR_SSL_SETDTR           0x0004
#define SUSBCR_SSL_CLRDTR           0x0010

/* Kill the pending/current writes to the comm port. */
#define SUSBCR_SSL_PURGE_TXABORT        0x0100
/* Kill the pending/current reads to the comm port. */
#define SUSBCR_SSL_PURGE_RXABORT        0x0200
/* Kill the transmit queue if there. */
#define SUSBCR_SSL_PURGE_TXCLEAR        0x0400
/* Kill the typeahead buffer if there. */
#define SUSBCR_SSL_PURGE_RXCLEAR        0x0800

#define SUSBCRequest_GetStatusLineState     4
/* Any Character received */
#define SUSBCR_GSL_RXCHAR           0x0001
/* Transmitt Queue Empty */
#define SUSBCR_GSL_TXEMPTY          0x0004
/* CTS changed state */
#define SUSBCR_GSL_CTS              0x0008
/* DSR changed state */
#define SUSBCR_GSL_DSR              0x0010
/* RLSD changed state */
#define SUSBCR_GSL_RLSD             0x0020
/* BREAK received */
#define SUSBCR_GSL_BREAK            0x0040
/* Line status error occurred */
#define SUSBCR_GSL_ERR              0x0080
/* Ring signal detected */
#define SUSBCR_GSL_RING             0x0100

#define SUSBCRequest_Misc           8
/* use a predefined reset sequence */
#define SUSBCR_MSC_ResetReader          0x0001
/* use a predefined sequence to reset the internal queues */
#define SUSBCR_MSC_ResetAllQueues       0x0002

#define SUSBCRequest_GetMisc            0x10

/*
 * get the firmware version from device, coded like this 0xHHLLBBPP with
 * HH = Firmware Version High Byte
 * LL = Firmware Version Low Byte
 * BB = Build Number
 * PP = Further Attributes
 */
#define SUSBCR_MSC_GetFWVersion         0x0001

/*
 * get the hardware version from device coded like this 0xHHLLPPRR with
 * HH = Software Version High Byte
 * LL = Software Version Low Byte
 * PP = Further Attributes
 * RR = Reserved for the hardware ID
 */
#define SUSBCR_MSC_GetHWVersion         0x0002