mach-ap121.c

Go to the documentation of this file.

/*
 *  Atheros AP121 board support
 *
 *  Copyright (C) 2011 Gabor Juhos <[email protected]>
 *
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 */

#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"

#define AP121_GPIO_LED_WLAN     0
#define AP121_GPIO_LED_USB      1

#define AP121_GPIO_BTN_JUMPSTART    11
#define AP121_GPIO_BTN_RESET        12

#define AP121_KEYS_POLL_INTERVAL    20  /* msecs */
#define AP121_KEYS_DEBOUNCE_INTERVAL    (3 * AP121_KEYS_POLL_INTERVAL)

#define AP121_CAL_DATA_ADDR 0x1fff1000

static struct gpio_led ap121_leds_gpio[] __initdata = {
    {
        .name       = "ap121:green:usb",
        .gpio       = AP121_GPIO_LED_USB,
        .active_low = 0,
    },
    {
        .name       = "ap121:green:wlan",
        .gpio       = AP121_GPIO_LED_WLAN,
        .active_low = 0,
    },
};

static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
    {
        .desc       = "jumpstart button",
        .type       = EV_KEY,
        .code       = KEY_WPS_BUTTON,
        .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
        .gpio       = AP121_GPIO_BTN_JUMPSTART,
        .active_low = 1,
    },
    {
        .desc       = "reset button",
        .type       = EV_KEY,
        .code       = KEY_RESTART,
        .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
        .gpio       = AP121_GPIO_BTN_RESET,
        .active_low = 1,
    }
};

static struct spi_board_info ap121_spi_info[] = {
    {
        .bus_num    = 0,
        .chip_select    = 0,
        .max_speed_hz   = 25000000,
        .modalias   = "mx25l1606e",
    }
};

static struct ath79_spi_platform_data ap121_spi_data = {
    .bus_num    = 0,
    .num_chipselect = 1,
};

static void __init ap121_setup(void)
{
    u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);

    ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
                 ap121_leds_gpio);
    ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
                    ARRAY_SIZE(ap121_gpio_keys),
                    ap121_gpio_keys);

    ath79_register_spi(&ap121_spi_data, ap121_spi_info,
               ARRAY_SIZE(ap121_spi_info));
    ath79_register_usb();
    ath79_register_wmac(cal_data);
}

MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
         ap121_setup);