Linux Kernel  3.7.1
 All Data Structures Namespaces Files Functions Variables Typedefs Enumerations Enumerator Macros Groups Pages
ioc.h
Go to the documentation of this file.
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License. See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * ioc.h: Definitions for SGI I/O Controller
7  *
8  * Copyright (C) 1996 David S. Miller
9  * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
10  * Copyright (C) 2001, 2003 Ladislav Michl
11  */
12 
13 #ifndef _SGI_IOC_H
14 #define _SGI_IOC_H
15 
16 #include <linux/types.h>
17 #include <asm/sgi/pi1.h>
18 
19 /*
20  * All registers are 8-bit wide aligned on 32-bit boundary. Bad things
21  * happen if you try word access them. You have been warned.
22  */
23 
24 struct sgioc_uart_regs {
25  u8 _ctrl1[3];
26  volatile u8 ctrl1;
27  u8 _data1[3];
28  volatile u8 data1;
29  u8 _ctrl2[3];
30  volatile u8 ctrl2;
31  u8 _data2[3];
32  volatile u8 data2;
33 };
34 
35 struct sgioc_keyb_regs {
36  u8 _data[3];
37  volatile u8 data;
38  u8 _command[3];
39  volatile u8 command;
40 };
41 
42 struct sgint_regs {
43  u8 _istat0[3];
44  volatile u8 istat0; /* Interrupt status zero */
45 #define SGINT_ISTAT0_FFULL 0x01
46 #define SGINT_ISTAT0_SCSI0 0x02
47 #define SGINT_ISTAT0_SCSI1 0x04
48 #define SGINT_ISTAT0_ENET 0x08
49 #define SGINT_ISTAT0_GFXDMA 0x10
50 #define SGINT_ISTAT0_PPORT 0x20
51 #define SGINT_ISTAT0_HPC2 0x40
52 #define SGINT_ISTAT0_LIO2 0x80
53  u8 _imask0[3];
54  volatile u8 imask0; /* Interrupt mask zero */
55  u8 _istat1[3];
56  volatile u8 istat1; /* Interrupt status one */
57 #define SGINT_ISTAT1_ISDNI 0x01
58 #define SGINT_ISTAT1_PWR 0x02
59 #define SGINT_ISTAT1_ISDNH 0x04
60 #define SGINT_ISTAT1_LIO3 0x08
61 #define SGINT_ISTAT1_HPC3 0x10
62 #define SGINT_ISTAT1_AFAIL 0x20
63 #define SGINT_ISTAT1_VIDEO 0x40
64 #define SGINT_ISTAT1_GIO2 0x80
65  u8 _imask1[3];
66  volatile u8 imask1; /* Interrupt mask one */
67  u8 _vmeistat[3];
68  volatile u8 vmeistat; /* VME interrupt status */
69  u8 _cmeimask0[3];
70  volatile u8 cmeimask0; /* VME interrupt mask zero */
71  u8 _cmeimask1[3];
72  volatile u8 cmeimask1; /* VME interrupt mask one */
73  u8 _cmepol[3];
74  volatile u8 cmepol; /* VME polarity */
75  u8 _tclear[3];
76  volatile u8 tclear;
77  u8 _errstat[3];
78  volatile u8 errstat; /* Error status reg, reserved on INT2 */
79  u32 _unused0[2];
80  u8 _tcnt0[3];
81  volatile u8 tcnt0; /* counter 0 */
82  u8 _tcnt1[3];
83  volatile u8 tcnt1; /* counter 1 */
84  u8 _tcnt2[3];
85  volatile u8 tcnt2; /* counter 2 */
86  u8 _tcword[3];
87  volatile u8 tcword; /* control word */
88 #define SGINT_TCWORD_BCD 0x01 /* Use BCD mode for counters */
89 #define SGINT_TCWORD_MMASK 0x0e /* Mode bitmask. */
90 #define SGINT_TCWORD_MITC 0x00 /* IRQ on terminal count (doesn't work) */
91 #define SGINT_TCWORD_MOS 0x02 /* One-shot IRQ mode. */
92 #define SGINT_TCWORD_MRGEN 0x04 /* Normal rate generation */
93 #define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */
94 #define SGINT_TCWORD_MSWST 0x08 /* Software strobe */
95 #define SGINT_TCWORD_MHWST 0x0a /* Hardware strobe */
96 #define SGINT_TCWORD_CMASK 0x30 /* Command mask */
97 #define SGINT_TCWORD_CLAT 0x00 /* Latch command */
98 #define SGINT_TCWORD_CLSB 0x10 /* LSB read/write */
99 #define SGINT_TCWORD_CMSB 0x20 /* MSB read/write */
100 #define SGINT_TCWORD_CALL 0x30 /* Full counter read/write */
101 #define SGINT_TCWORD_CNT0 0x00 /* Select counter zero */
102 #define SGINT_TCWORD_CNT1 0x40 /* Select counter one */
103 #define SGINT_TCWORD_CNT2 0x80 /* Select counter two */
104 #define SGINT_TCWORD_CRBCK 0xc0 /* Readback command */
105 };
106 
107 /*
108  * The timer is the good old 8254. Unlike in PCs it's clocked at exactly 1MHz
109  */
110 #define SGINT_TIMER_CLOCK 1000000
111 
112 /*
113  * This is the constant we're using for calibrating the counter.
114  */
115 #define SGINT_TCSAMP_COUNTER ((SGINT_TIMER_CLOCK / HZ) + 255)
116 
117 /* We need software copies of these because they are write only. */
118 extern u8 sgi_ioc_reset, sgi_ioc_write;
119 
120 struct sgioc_regs {
121  struct pi1_regs pport;
122  u32 _unused0[2];
123  struct sgioc_uart_regs uart;
124  struct sgioc_keyb_regs kbdmouse;
125  u8 _gcsel[3];
126  volatile u8 gcsel;
127  u8 _genctrl[3];
128  volatile u8 genctrl;
129  u8 _panel[3];
130  volatile u8 panel;
131 #define SGIOC_PANEL_POWERON 0x01
132 #define SGIOC_PANEL_POWERINTR 0x02
133 #define SGIOC_PANEL_VOLDNINTR 0x10
134 #define SGIOC_PANEL_VOLDNHOLD 0x20
135 #define SGIOC_PANEL_VOLUPINTR 0x40
136 #define SGIOC_PANEL_VOLUPHOLD 0x80
137  u32 _unused1;
138  u8 _sysid[3];
139  volatile u8 sysid;
140 #define SGIOC_SYSID_FULLHOUSE 0x01
141 #define SGIOC_SYSID_BOARDREV(x) (((x) & 0x1e) >> 1)
142 #define SGIOC_SYSID_CHIPREV(x) (((x) & 0xe0) >> 5)
143  u32 _unused2;
144  u8 _read[3];
145  volatile u8 read;
146  u32 _unused3;
147  u8 _dmasel[3];
148  volatile u8 dmasel;
149 #define SGIOC_DMASEL_SCLK10MHZ 0x00 /* use 10MHZ serial clock */
150 #define SGIOC_DMASEL_ISDNB 0x01 /* enable isdn B */
151 #define SGIOC_DMASEL_ISDNA 0x02 /* enable isdn A */
152 #define SGIOC_DMASEL_PPORT 0x04 /* use parallel DMA */
153 #define SGIOC_DMASEL_SCLK667MHZ 0x10 /* use 6.67MHZ serial clock */
154 #define SGIOC_DMASEL_SCLKEXT 0x20 /* use external serial clock */
155  u32 _unused4;
156  u8 _reset[3];
157  volatile u8 reset;
158 #define SGIOC_RESET_PPORT 0x01 /* 0=parport reset, 1=nornal */
159 #define SGIOC_RESET_KBDMOUSE 0x02 /* 0=kbdmouse reset, 1=normal */
160 #define SGIOC_RESET_EISA 0x04 /* 0=eisa reset, 1=normal */
161 #define SGIOC_RESET_ISDN 0x08 /* 0=isdn reset, 1=normal */
162 #define SGIOC_RESET_LC0OFF 0x10 /* guiness: turn led off (red, else green) */
163 #define SGIOC_RESET_LC1OFF 0x20 /* guiness: turn led off (green, else amber) */
164  u32 _unused5;
165  u8 _write[3];
166  volatile u8 write;
167 #define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */
168 #define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */
169 #define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */
170 #define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
171 #define SGIOC_WRITE_U1AMODE 0x10 /* 1=PC 0=MAC UART mode */
172 #define SGIOC_WRITE_U0AMODE 0x20 /* 1=PC 0=MAC UART mode */
173 #define SGIOC_WRITE_MLO 0x40 /* 1=4.75V 0=+5V */
174 #define SGIOC_WRITE_MHI 0x80 /* 1=5.25V 0=+5V */
175  u32 _unused6;
176  struct sgint_regs int3;
177  u32 _unused7[16];
178  volatile u32 extio; /* FullHouse only */
179 #define EXTIO_S0_IRQ_3 0x8000 /* S0: vid.vsync */
180 #define EXTIO_S0_IRQ_2 0x4000 /* S0: gfx.fifofull */
181 #define EXTIO_S0_IRQ_1 0x2000 /* S0: gfx.int */
182 #define EXTIO_S0_RETRACE 0x1000
183 #define EXTIO_SG_IRQ_3 0x0800 /* SG: vid.vsync */
184 #define EXTIO_SG_IRQ_2 0x0400 /* SG: gfx.fifofull */
185 #define EXTIO_SG_IRQ_1 0x0200 /* SG: gfx.int */
186 #define EXTIO_SG_RETRACE 0x0100
187 #define EXTIO_GIO_33MHZ 0x0080
188 #define EXTIO_EISA_BUSERR 0x0040
189 #define EXTIO_MC_BUSERR 0x0020
190 #define EXTIO_HPC3_BUSERR 0x0010
191 #define EXTIO_S0_STAT_1 0x0008
192 #define EXTIO_S0_STAT_0 0x0004
193 #define EXTIO_SG_STAT_1 0x0002
194 #define EXTIO_SG_STAT_0 0x0001
195 };
196 
197 extern struct sgioc_regs *sgioc;
198 extern struct sgint_regs *sgint;
199 
200 #endif
Generated on Thu Jan 10 2013 12:55:07 for Linux Kernel by   doxygen 1.8.2