mpc5200_simple.c

Go to the documentation of this file.

/*
 * Support for 'mpc5200-simple-platform' compatible boards.
 *
 * Written by Marian Balakowicz <[email protected]>
 * Copyright (C) 2007 Semihalf
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 * Description:
 * This code implements support for a simple MPC52xx based boards which
 * do not need a custom platform specific setup. Such boards are
 * supported assuming the following:
 *
 * - GPIO pins are configured by the firmware,
 * - CDM configuration (clocking) is setup correctly by firmware,
 * - if the 'fsl,has-wdt' property is present in one of the
 *   gpt nodes, then it is safe to use such gpt to reset the board,
 * - PCI is supported if enabled in the kernel configuration
 *   and if there is a PCI bus node defined in the device tree.
 *
 * Boards that are compatible with this generic platform support
 * are listed in a 'board' table.
 */

#undef DEBUG
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/mpc52xx.h>

/*
 * Setup the architecture
 */
static void __init mpc5200_simple_setup_arch(void)
{
    if (ppc_md.progress)
        ppc_md.progress("mpc5200_simple_setup_arch()", 0);

    /* Map important registers from the internal memory map */
    mpc52xx_map_common_devices();

    /* Some mpc5200 & mpc5200b related configuration */
    mpc5200_setup_xlb_arbiter();

    mpc52xx_setup_pci();
}

/* list of the supported boards */
static const char *board[] __initdata = {
    "anonymous,a4m072",
    "anon,charon",
    "ifm,o2d",
    "intercontrol,digsy-mtc",
    "manroland,mucmc52",
    "manroland,uc101",
    "phytec,pcm030",
    "phytec,pcm032",
    "promess,motionpro",
    "schindler,cm5200",
    "tqc,tqm5200",
    NULL
};

/*
 * Called very early, MMU is off, device-tree isn't unflattened
 */
static int __init mpc5200_simple_probe(void)
{
    return of_flat_dt_match(of_get_flat_dt_root(), board);
}

define_machine(mpc5200_simple_platform) {
    .name       = "mpc5200-simple-platform",
    .probe      = mpc5200_simple_probe,
    .setup_arch = mpc5200_simple_setup_arch,
    .init       = mpc52xx_declare_of_platform_devices,
    .init_IRQ   = mpc52xx_init_irq,
    .get_irq    = mpc52xx_get_irq,
    .restart    = mpc52xx_restart,
    .calibrate_decr = generic_calibrate_decr,
};