netup-eeprom.c

Go to the documentation of this file.

/*
 * netup-eeprom.c
 *
 * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card
 *
 * Copyright (C) 2009 NetUP Inc.
 * Copyright (C) 2009 Abylay Ospan <[email protected]>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#
#include "cx23885.h"
#include "netup-eeprom.h"

#define EEPROM_I2C_ADDR 0x50

int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr)
{
    int ret;
    unsigned char buf[2];

    /* Read from EEPROM */
    struct i2c_msg msg[] = {
        {
            .addr   = EEPROM_I2C_ADDR,
            .flags  = 0,
            .buf    = &buf[0],
            .len    = 1
        }, {
            .addr   = EEPROM_I2C_ADDR,
            .flags  = I2C_M_RD,
            .buf    = &buf[1],
            .len    = 1
        }

    };

    buf[0] = addr;
    buf[1] = 0x0;

    ret = i2c_transfer(i2c_adap, msg, 2);

    if (ret != 2) {
        printk(KERN_ERR "eeprom i2c read error, status=%d\n", ret);
        return -1;
    }

    return buf[1];
};

int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data)
{
    int ret;
    unsigned char bufw[2];

    /* Write into EEPROM */
    struct i2c_msg msg[] = {
        {
            .addr   = EEPROM_I2C_ADDR,
            .flags  = 0,
            .buf    = &bufw[0],
            .len    = 2
        }
    };

    bufw[0] = addr;
    bufw[1] = data;

    ret = i2c_transfer(i2c_adap, msg, 1);

    if (ret != 1) {
        printk(KERN_ERR "eeprom i2c write error, status=%d\n", ret);
        return -1;
    }

    mdelay(10); /* prophylactic delay, datasheet write cycle time = 5 ms */
    return 0;
};

void netup_get_card_info(struct i2c_adapter *i2c_adap,
                struct netup_card_info *cinfo)
{
    int i, j;

    cinfo->rev =  netup_eeprom_read(i2c_adap, 63);

    for (i = 64, j = 0; i < 70; i++, j++)
        cinfo->port[0].mac[j] =  netup_eeprom_read(i2c_adap, i);

    for (i = 70, j = 0; i < 76; i++, j++)
        cinfo->port[1].mac[j] =  netup_eeprom_read(i2c_adap, i);
};