rc-msi-tvanywhere-plus.c

Go to the documentation of this file.

/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller
 *
 * keymap imported from ir-keymaps.c
 *
 * Copyright (c) 2010 by Mauro Carvalho Chehab <[email protected]>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <media/rc-map.h>
#include <linux/module.h>

/*
  Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
  is marked "KS003". The controller is I2C at address 0x30, but does not seem
  to respond to probes until a read is performed from a valid device.
  I don't know why...

  Note: This remote may be of similar or identical design to the
  Pixelview remote (?).  The raw codes and duplicate button codes
  appear to be the same.

  Henry Wong <[email protected]>
  Some changes to formatting and keycodes by Mark Schultz <[email protected]>
*/

static struct rc_map_table msi_tvanywhere_plus[] = {

/*  ---- Remote Button Layout ----

    POWER   SOURCE  SCAN    MUTE
    TV/FM   1       2       3
    |>      4       5       6
    <|      7       8       9
    ^^UP    0       +       RECALL
    vvDN    RECORD  STOP    PLAY

    MINIMIZE          ZOOM

          CH+
      VOL-                   VOL+
          CH-

    SNAPSHOT           MTS

     <<      FUNC    >>     RESET
*/

    { 0x01, KEY_1 },        /* 1 */
    { 0x0b, KEY_2 },        /* 2 */
    { 0x1b, KEY_3 },        /* 3 */
    { 0x05, KEY_4 },        /* 4 */
    { 0x09, KEY_5 },        /* 5 */
    { 0x15, KEY_6 },        /* 6 */
    { 0x06, KEY_7 },        /* 7 */
    { 0x0a, KEY_8 },        /* 8 */
    { 0x12, KEY_9 },        /* 9 */
    { 0x02, KEY_0 },        /* 0 */
    { 0x10, KEY_KPPLUS },       /* + */
    { 0x13, KEY_AGAIN },        /* Recall */

    { 0x1e, KEY_POWER },        /* Power */
    { 0x07, KEY_VIDEO },        /* Source */
    { 0x1c, KEY_SEARCH },       /* Scan */
    { 0x18, KEY_MUTE },     /* Mute */

    { 0x03, KEY_RADIO },        /* TV/FM */
    /* The next four keys are duplicates that appear to send the
       same IR code as Ch+, Ch-, >>, and << .  The raw code assigned
       to them is the actual code + 0x20 - they will never be
       detected as such unless some way is discovered to distinguish
       these buttons from those that have the same code. */
    { 0x3f, KEY_RIGHT },        /* |> and Ch+ */
    { 0x37, KEY_LEFT },     /* <| and Ch- */
    { 0x2c, KEY_UP },       /* ^^Up and >> */
    { 0x24, KEY_DOWN },     /* vvDn and << */

    { 0x00, KEY_RECORD },       /* Record */
    { 0x08, KEY_STOP },     /* Stop */
    { 0x11, KEY_PLAY },     /* Play */

    { 0x0f, KEY_CLOSE },        /* Minimize */
    { 0x19, KEY_ZOOM },     /* Zoom */
    { 0x1a, KEY_CAMERA },       /* Snapshot */
    { 0x0d, KEY_LANGUAGE },     /* MTS */

    { 0x14, KEY_VOLUMEDOWN },   /* Vol- */
    { 0x16, KEY_VOLUMEUP },     /* Vol+ */
    { 0x17, KEY_CHANNELDOWN },  /* Ch- */
    { 0x1f, KEY_CHANNELUP },    /* Ch+ */

    { 0x04, KEY_REWIND },       /* << */
    { 0x0e, KEY_MENU },     /* Function */
    { 0x0c, KEY_FASTFORWARD },  /* >> */
    { 0x1d, KEY_RESTART },      /* Reset */
};

static struct rc_map_list msi_tvanywhere_plus_map = {
    .map = {
        .scan    = msi_tvanywhere_plus,
        .size    = ARRAY_SIZE(msi_tvanywhere_plus),
        .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
        .name    = RC_MAP_MSI_TVANYWHERE_PLUS,
    }
};

static int __init init_rc_map_msi_tvanywhere_plus(void)
{
    return rc_map_register(&msi_tvanywhere_plus_map);
}

static void __exit exit_rc_map_msi_tvanywhere_plus(void)
{
    rc_map_unregister(&msi_tvanywhere_plus_map);
}

module_init(init_rc_map_msi_tvanywhere_plus)
module_exit(exit_rc_map_msi_tvanywhere_plus)

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mauro Carvalho Chehab <[email protected]>");