regs-i2c.h

Go to the documentation of this file.

/*
 * PKUnity Inter-integrated Circuit (I2C) Registers
 */

/*
 * Control Reg I2C_CON.
 */
#define I2C_CON     (PKUNITY_I2C_BASE + 0x0000)
/*
 * Target Address Reg I2C_TAR.
 */
#define I2C_TAR     (PKUNITY_I2C_BASE + 0x0004)
/*
 * Data buffer and command Reg I2C_DATACMD.
 */
#define I2C_DATACMD (PKUNITY_I2C_BASE + 0x0010)
/*
 * Enable Reg I2C_ENABLE.
 */
#define I2C_ENABLE  (PKUNITY_I2C_BASE + 0x006C)
/*
 * Status Reg I2C_STATUS.
 */
#define I2C_STATUS  (PKUNITY_I2C_BASE + 0x0070)
/*
 * Tx FIFO Length Reg I2C_TXFLR.
 */
#define I2C_TXFLR   (PKUNITY_I2C_BASE + 0x0074)
/*
 * Rx FIFO Length Reg I2C_RXFLR.
 */
#define I2C_RXFLR   (PKUNITY_I2C_BASE + 0x0078)
/*
 * Enable Status Reg I2C_ENSTATUS.
 */
#define I2C_ENSTATUS    (PKUNITY_I2C_BASE + 0x009C)

#define I2C_CON_MASTER          FIELD(1, 1, 0)
#define I2C_CON_SPEED_STD       FIELD(1, 2, 1)
#define I2C_CON_SPEED_FAST      FIELD(2, 2, 1)
#define I2C_CON_RESTART         FIELD(1, 1, 5)
#define I2C_CON_SLAVEDISABLE    FIELD(1, 1, 6)

#define I2C_DATACMD_READ        FIELD(1, 1, 8)
#define I2C_DATACMD_WRITE       FIELD(0, 1, 8)
#define I2C_DATACMD_DAT_MASK    FMASK(8, 0)
#define I2C_DATACMD_DAT(v)      FIELD((v), 8, 0)

#define I2C_ENABLE_ENABLE       FIELD(1, 1, 0)
#define I2C_ENABLE_DISABLE      FIELD(0, 1, 0)

#define I2C_STATUS_RFF          FIELD(1, 1, 4)
#define I2C_STATUS_RFNE         FIELD(1, 1, 3)
#define I2C_STATUS_TFE          FIELD(1, 1, 2)
#define I2C_STATUS_TFNF         FIELD(1, 1, 1)
#define I2C_STATUS_ACTIVITY     FIELD(1, 1, 0)

#define I2C_ENSTATUS_ENABLE FIELD(1, 1, 0)

#define I2C_TAR_THERMAL 0x4f
#define I2C_TAR_SPD 0x50
#define I2C_TAR_PWIC    0x55
#define I2C_TAR_EEPROM  0x57