scsi_devinfo.h

Go to the documentation of this file.

#ifndef _SCSI_SCSI_DEVINFO_H
#define _SCSI_SCSI_DEVINFO_H
/*
 * Flags for SCSI devices that need special treatment
 */
#define BLIST_NOLUN         0x001   /* Only scan LUN 0 */
#define BLIST_FORCELUN      0x002   /* Known to have LUNs, force scanning,
                       deprecated: Use max_luns=N */
#define BLIST_BORKEN        0x004   /* Flag for broken handshaking */
#define BLIST_KEY           0x008   /* unlock by special command */
#define BLIST_SINGLELUN     0x010   /* Do not use LUNs in parallel */
#define BLIST_NOTQ      0x020   /* Buggy Tagged Command Queuing */
#define BLIST_SPARSELUN     0x040   /* Non consecutive LUN numbering */
#define BLIST_MAX5LUN       0x080   /* Avoid LUNS >= 5 */
#define BLIST_ISROM         0x100   /* Treat as (removable) CD-ROM */
#define BLIST_LARGELUN      0x200   /* LUNs past 7 on a SCSI-2 device */
#define BLIST_INQUIRY_36    0x400   /* override additional length field */
#define BLIST_INQUIRY_58    0x800   /* ... for broken inquiry responses */
#define BLIST_NOSTARTONADD  0x1000  /* do not do automatic start on add */
#define BLIST_MS_SKIP_PAGE_08   0x2000  /* do not send ms page 0x08 */
#define BLIST_MS_SKIP_PAGE_3F   0x4000  /* do not send ms page 0x3f */
#define BLIST_USE_10_BYTE_MS    0x8000  /* use 10 byte ms before 6 byte ms */
#define BLIST_MS_192_BYTES_FOR_3F   0x10000 /*  192 byte ms page 0x3f request */
#define BLIST_REPORTLUN2    0x20000 /* try REPORT_LUNS even for SCSI-2 devs
                       (if HBA supports more than 8 LUNs) */
#define BLIST_NOREPORTLUN   0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */
#define BLIST_NOT_LOCKABLE  0x80000 /* don't use PREVENT-ALLOW commands */
#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
#define BLIST_MAX_512       0x800000 /* maximum 512 sector cdb length */
#define BLIST_ATTACH_PQ3    0x1000000 /* Scan: Attach to PQ3 devices */
#define BLIST_NO_DIF        0x2000000 /* Disable T10 PI (DIF) */
#endif