sm501-regs.h

Go to the documentation of this file.

/* sm501-regs.h
 *
 * Copyright 2006 Simtec Electronics
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Silicon Motion SM501 register definitions
*/

/* System Configuration area */
/* System config base */
#define SM501_SYS_CONFIG        (0x000000)

/* config 1 */
#define SM501_SYSTEM_CONTROL        (0x000000)

#define SM501_SYSCTRL_PANEL_TRISTATE    (1<<0)
#define SM501_SYSCTRL_MEM_TRISTATE  (1<<1)
#define SM501_SYSCTRL_CRT_TRISTATE  (1<<2)

#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4)
#define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4)

#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN  (1<<6)
#define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7)
#define SM501_SYSCTRL_PCI_SUBSYS_LOCK   (1<<11)
#define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15)

#define SM501_SYSCTRL_2D_ENGINE_STATUS  (1<<19)

/* miscellaneous control */

#define SM501_MISC_CONTROL      (0x000004)

#define SM501_MISC_BUS_SH       (0x0)
#define SM501_MISC_BUS_PCI      (0x1)
#define SM501_MISC_BUS_XSCALE       (0x2)
#define SM501_MISC_BUS_NEC      (0x6)
#define SM501_MISC_BUS_MASK     (0x7)

#define SM501_MISC_VR_62MB      (1<<3)
#define SM501_MISC_CDR_RESET        (1<<7)
#define SM501_MISC_USB_LB       (1<<8)
#define SM501_MISC_USB_SLAVE        (1<<9)
#define SM501_MISC_BL_1         (1<<10)
#define SM501_MISC_MC           (1<<11)
#define SM501_MISC_DAC_POWER        (1<<12)
#define SM501_MISC_IRQ_INVERT       (1<<16)
#define SM501_MISC_SH           (1<<17)

#define SM501_MISC_HOLD_EMPTY       (0<<18)
#define SM501_MISC_HOLD_8       (1<<18)
#define SM501_MISC_HOLD_16      (2<<18)
#define SM501_MISC_HOLD_24      (3<<18)
#define SM501_MISC_HOLD_32      (4<<18)
#define SM501_MISC_HOLD_MASK        (7<<18)

#define SM501_MISC_FREQ_12      (1<<24)
#define SM501_MISC_PNL_24BIT        (1<<25)
#define SM501_MISC_8051_LE      (1<<26)



#define SM501_GPIO31_0_CONTROL      (0x000008)
#define SM501_GPIO63_32_CONTROL     (0x00000C)
#define SM501_DRAM_CONTROL      (0x000010)

/* command list */
#define SM501_ARBTRTN_CONTROL       (0x000014)

/* command list */
#define SM501_COMMAND_LIST_STATUS   (0x000024)

/* interrupt debug */
#define SM501_RAW_IRQ_STATUS        (0x000028)
#define SM501_RAW_IRQ_CLEAR     (0x000028)
#define SM501_IRQ_STATUS        (0x00002C)
#define SM501_IRQ_MASK          (0x000030)
#define SM501_DEBUG_CONTROL     (0x000034)

/* power management */
#define SM501_POWERMODE_P2X_SRC     (1<<29)
#define SM501_POWERMODE_V2X_SRC     (1<<20)
#define SM501_POWERMODE_M_SRC       (1<<12)
#define SM501_POWERMODE_M1_SRC      (1<<4)

#define SM501_CURRENT_GATE      (0x000038)
#define SM501_CURRENT_CLOCK     (0x00003C)
#define SM501_POWER_MODE_0_GATE     (0x000040)
#define SM501_POWER_MODE_0_CLOCK    (0x000044)
#define SM501_POWER_MODE_1_GATE     (0x000048)
#define SM501_POWER_MODE_1_CLOCK    (0x00004C)
#define SM501_SLEEP_MODE_GATE       (0x000050)
#define SM501_POWER_MODE_CONTROL    (0x000054)

/* power gates for units within the 501 */
#define SM501_GATE_HOST         (0)
#define SM501_GATE_MEMORY       (1)
#define SM501_GATE_DISPLAY      (2)
#define SM501_GATE_2D_ENGINE        (3)
#define SM501_GATE_CSC          (4)
#define SM501_GATE_ZVPORT       (5)
#define SM501_GATE_GPIO         (6)
#define SM501_GATE_UART0        (7)
#define SM501_GATE_UART1        (8)
#define SM501_GATE_SSP          (10)
#define SM501_GATE_USB_HOST     (11)
#define SM501_GATE_USB_GADGET       (12)
#define SM501_GATE_UCONTROLLER      (17)
#define SM501_GATE_AC97         (18)

/* panel clock */
#define SM501_CLOCK_P2XCLK      (24)
/* crt clock */
#define SM501_CLOCK_V2XCLK      (16)
/* main clock */
#define SM501_CLOCK_MCLK        (8)
/* SDRAM controller clock */
#define SM501_CLOCK_M1XCLK      (0)

/* config 2 */
#define SM501_PCI_MASTER_BASE       (0x000058)
#define SM501_ENDIAN_CONTROL        (0x00005C)
#define SM501_DEVICEID          (0x000060)
/* 0x050100A0 */

#define SM501_DEVICEID_SM501        (0x05010000)
#define SM501_DEVICEID_IDMASK       (0xffff0000)
#define SM501_DEVICEID_REVMASK      (0x000000ff)

#define SM501_PLLCLOCK_COUNT        (0x000064)
#define SM501_MISC_TIMING       (0x000068)
#define SM501_CURRENT_SDRAM_CLOCK   (0x00006C)

#define SM501_PROGRAMMABLE_PLL_CONTROL  (0x000074)

/* GPIO base */
#define SM501_GPIO          (0x010000)
#define SM501_GPIO_DATA_LOW     (0x00)
#define SM501_GPIO_DATA_HIGH        (0x04)
#define SM501_GPIO_DDR_LOW      (0x08)
#define SM501_GPIO_DDR_HIGH     (0x0C)
#define SM501_GPIO_IRQ_SETUP        (0x10)
#define SM501_GPIO_IRQ_STATUS       (0x14)
#define SM501_GPIO_IRQ_RESET        (0x14)

/* I2C controller base */
#define SM501_I2C           (0x010040)
#define SM501_I2C_BYTE_COUNT        (0x00)
#define SM501_I2C_CONTROL       (0x01)
#define SM501_I2C_STATUS        (0x02)
#define SM501_I2C_RESET         (0x02)
#define SM501_I2C_SLAVE_ADDRESS     (0x03)
#define SM501_I2C_DATA          (0x04)

/* SSP base */
#define SM501_SSP           (0x020000)

/* Uart 0 base */
#define SM501_UART0         (0x030000)

/* Uart 1 base */
#define SM501_UART1         (0x030020)

/* USB host port base */
#define SM501_USB_HOST          (0x040000)

/* USB slave/gadget base */
#define SM501_USB_GADGET        (0x060000)

/* USB slave/gadget data port base */
#define SM501_USB_GADGET_DATA       (0x070000)

/* Display controller/video engine base */
#define SM501_DC            (0x080000)

/* common defines for the SM501 address registers */
#define SM501_ADDR_FLIP         (1<<31)
#define SM501_ADDR_EXT          (1<<27)
#define SM501_ADDR_CS1          (1<<26)
#define SM501_ADDR_MASK         (0x3f << 26)

#define SM501_FIFO_MASK         (0x3 << 16)
#define SM501_FIFO_1            (0x0 << 16)
#define SM501_FIFO_3            (0x1 << 16)
#define SM501_FIFO_7            (0x2 << 16)
#define SM501_FIFO_11           (0x3 << 16)

/* common registers for panel and the crt */
#define SM501_OFF_DC_H_TOT      (0x000)
#define SM501_OFF_DC_V_TOT      (0x008)
#define SM501_OFF_DC_H_SYNC     (0x004)
#define SM501_OFF_DC_V_SYNC     (0x00C)

#define SM501_DC_PANEL_CONTROL      (0x000)

#define SM501_DC_PANEL_CONTROL_FPEN (1<<27)
#define SM501_DC_PANEL_CONTROL_BIAS (1<<26)
#define SM501_DC_PANEL_CONTROL_DATA (1<<25)
#define SM501_DC_PANEL_CONTROL_VDD  (1<<24)
#define SM501_DC_PANEL_CONTROL_DP   (1<<23)

#define SM501_DC_PANEL_CONTROL_TFT_888  (0<<21)
#define SM501_DC_PANEL_CONTROL_TFT_333  (1<<21)
#define SM501_DC_PANEL_CONTROL_TFT_444  (2<<21)

#define SM501_DC_PANEL_CONTROL_DE   (1<<20)

#define SM501_DC_PANEL_CONTROL_LCD_TFT  (0<<18)
#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18)
#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)

#define SM501_DC_PANEL_CONTROL_CP   (1<<14)
#define SM501_DC_PANEL_CONTROL_VSP  (1<<13)
#define SM501_DC_PANEL_CONTROL_HSP  (1<<12)
#define SM501_DC_PANEL_CONTROL_CK   (1<<9)
#define SM501_DC_PANEL_CONTROL_TE   (1<<8)
#define SM501_DC_PANEL_CONTROL_VPD  (1<<7)
#define SM501_DC_PANEL_CONTROL_VP   (1<<6)
#define SM501_DC_PANEL_CONTROL_HPD  (1<<5)
#define SM501_DC_PANEL_CONTROL_HP   (1<<4)
#define SM501_DC_PANEL_CONTROL_GAMMA    (1<<3)
#define SM501_DC_PANEL_CONTROL_EN   (1<<2)

#define SM501_DC_PANEL_CONTROL_8BPP (0<<0)
#define SM501_DC_PANEL_CONTROL_16BPP    (1<<0)
#define SM501_DC_PANEL_CONTROL_32BPP    (2<<0)


#define SM501_DC_PANEL_PANNING_CONTROL  (0x004)
#define SM501_DC_PANEL_COLOR_KEY    (0x008)
#define SM501_DC_PANEL_FB_ADDR      (0x00C)
#define SM501_DC_PANEL_FB_OFFSET    (0x010)
#define SM501_DC_PANEL_FB_WIDTH     (0x014)
#define SM501_DC_PANEL_FB_HEIGHT    (0x018)
#define SM501_DC_PANEL_TL_LOC       (0x01C)
#define SM501_DC_PANEL_BR_LOC       (0x020)
#define SM501_DC_PANEL_H_TOT        (0x024)
#define SM501_DC_PANEL_H_SYNC       (0x028)
#define SM501_DC_PANEL_V_TOT        (0x02C)
#define SM501_DC_PANEL_V_SYNC       (0x030)
#define SM501_DC_PANEL_CUR_LINE     (0x034)

#define SM501_DC_VIDEO_CONTROL      (0x040)
#define SM501_DC_VIDEO_FB0_ADDR     (0x044)
#define SM501_DC_VIDEO_FB_WIDTH     (0x048)
#define SM501_DC_VIDEO_FB0_LAST_ADDR    (0x04C)
#define SM501_DC_VIDEO_TL_LOC       (0x050)
#define SM501_DC_VIDEO_BR_LOC       (0x054)
#define SM501_DC_VIDEO_SCALE        (0x058)
#define SM501_DC_VIDEO_INIT_SCALE   (0x05C)
#define SM501_DC_VIDEO_YUV_CONSTANTS    (0x060)
#define SM501_DC_VIDEO_FB1_ADDR     (0x064)
#define SM501_DC_VIDEO_FB1_LAST_ADDR    (0x068)

#define SM501_DC_VIDEO_ALPHA_CONTROL    (0x080)
#define SM501_DC_VIDEO_ALPHA_FB_ADDR    (0x084)
#define SM501_DC_VIDEO_ALPHA_FB_OFFSET  (0x088)
#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR   (0x08C)
#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090)
#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094)
#define SM501_DC_VIDEO_ALPHA_SCALE  (0x098)
#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C)
#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0)
#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP   (0x0A4)

#define SM501_DC_PANEL_HWC_BASE     (0x0F0)
#define SM501_DC_PANEL_HWC_ADDR     (0x0F0)
#define SM501_DC_PANEL_HWC_LOC      (0x0F4)
#define SM501_DC_PANEL_HWC_COLOR_1_2    (0x0F8)
#define SM501_DC_PANEL_HWC_COLOR_3  (0x0FC)

#define SM501_HWC_EN            (1<<31)

#define SM501_OFF_HWC_ADDR      (0x00)
#define SM501_OFF_HWC_LOC       (0x04)
#define SM501_OFF_HWC_COLOR_1_2     (0x08)
#define SM501_OFF_HWC_COLOR_3       (0x0C)

#define SM501_DC_ALPHA_CONTROL      (0x100)
#define SM501_DC_ALPHA_FB_ADDR      (0x104)
#define SM501_DC_ALPHA_FB_OFFSET    (0x108)
#define SM501_DC_ALPHA_TL_LOC       (0x10C)
#define SM501_DC_ALPHA_BR_LOC       (0x110)
#define SM501_DC_ALPHA_CHROMA_KEY   (0x114)
#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118)

#define SM501_DC_CRT_CONTROL        (0x200)

#define SM501_DC_CRT_CONTROL_TVP    (1<<15)
#define SM501_DC_CRT_CONTROL_CP     (1<<14)
#define SM501_DC_CRT_CONTROL_VSP    (1<<13)
#define SM501_DC_CRT_CONTROL_HSP    (1<<12)
#define SM501_DC_CRT_CONTROL_VS     (1<<11)
#define SM501_DC_CRT_CONTROL_BLANK  (1<<10)
#define SM501_DC_CRT_CONTROL_SEL    (1<<9)
#define SM501_DC_CRT_CONTROL_TE     (1<<8)
#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
#define SM501_DC_CRT_CONTROL_GAMMA  (1<<3)
#define SM501_DC_CRT_CONTROL_ENABLE (1<<2)

#define SM501_DC_CRT_CONTROL_8BPP   (0<<0)
#define SM501_DC_CRT_CONTROL_16BPP  (1<<0)
#define SM501_DC_CRT_CONTROL_32BPP  (2<<0)

#define SM501_DC_CRT_FB_ADDR        (0x204)
#define SM501_DC_CRT_FB_OFFSET      (0x208)
#define SM501_DC_CRT_H_TOT      (0x20C)
#define SM501_DC_CRT_H_SYNC     (0x210)
#define SM501_DC_CRT_V_TOT      (0x214)
#define SM501_DC_CRT_V_SYNC     (0x218)
#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C)
#define SM501_DC_CRT_CUR_LINE       (0x220)
#define SM501_DC_CRT_MONITOR_DETECT (0x224)

#define SM501_DC_CRT_HWC_BASE       (0x230)
#define SM501_DC_CRT_HWC_ADDR       (0x230)
#define SM501_DC_CRT_HWC_LOC        (0x234)
#define SM501_DC_CRT_HWC_COLOR_1_2  (0x238)
#define SM501_DC_CRT_HWC_COLOR_3    (0x23C)

#define SM501_DC_PANEL_PALETTE      (0x400)

#define SM501_DC_VIDEO_PALETTE      (0x800)

#define SM501_DC_CRT_PALETTE        (0xC00)

/* Zoom Video port base */
#define SM501_ZVPORT            (0x090000)

/* AC97/I2S base */
#define SM501_AC97          (0x0A0000)

/* 8051 micro controller base */
#define SM501_UCONTROLLER       (0x0B0000)

/* 8051 micro controller SRAM base */
#define SM501_UCONTROLLER_SRAM      (0x0C0000)

/* DMA base */
#define SM501_DMA           (0x0D0000)

/* 2d engine base */
#define SM501_2D_ENGINE         (0x100000)
#define SM501_2D_SOURCE         (0x00)
#define SM501_2D_DESTINATION        (0x04)
#define SM501_2D_DIMENSION      (0x08)
#define SM501_2D_CONTROL        (0x0C)
#define SM501_2D_PITCH          (0x10)
#define SM501_2D_FOREGROUND     (0x14)
#define SM501_2D_BACKGROUND     (0x18)
#define SM501_2D_STRETCH        (0x1C)
#define SM501_2D_COLOR_COMPARE      (0x20)
#define SM501_2D_COLOR_COMPARE_MASK     (0x24)
#define SM501_2D_MASK           (0x28)
#define SM501_2D_CLIP_TL        (0x2C)
#define SM501_2D_CLIP_BR        (0x30)
#define SM501_2D_MONO_PATTERN_LOW   (0x34)
#define SM501_2D_MONO_PATTERN_HIGH  (0x38)
#define SM501_2D_WINDOW_WIDTH       (0x3C)
#define SM501_2D_SOURCE_BASE        (0x40)
#define SM501_2D_DESTINATION_BASE   (0x44)
#define SM501_2D_ALPHA          (0x48)
#define SM501_2D_WRAP           (0x4C)
#define SM501_2D_STATUS         (0x50)

#define SM501_CSC_Y_SOURCE_BASE     (0xC8)
#define SM501_CSC_CONSTANTS     (0xCC)
#define SM501_CSC_Y_SOURCE_X        (0xD0)
#define SM501_CSC_Y_SOURCE_Y        (0xD4)
#define SM501_CSC_U_SOURCE_BASE     (0xD8)
#define SM501_CSC_V_SOURCE_BASE     (0xDC)
#define SM501_CSC_SOURCE_DIMENSION  (0xE0)
#define SM501_CSC_SOURCE_PITCH      (0xE4)
#define SM501_CSC_DESTINATION       (0xE8)
#define SM501_CSC_DESTINATION_DIMENSION (0xEC)
#define SM501_CSC_DESTINATION_PITCH (0xF0)
#define SM501_CSC_SCALE_FACTOR      (0xF4)
#define SM501_CSC_DESTINATION_BASE  (0xF8)
#define SM501_CSC_CONTROL       (0xFC)

/* 2d engine data port base */
#define SM501_2D_ENGINE_DATA        (0x110000)