diameter_app

A diameter service as started by diameter:start_service/2 configures one of more Diameter applications, each of whose configuration specifies a callback that handles messages specific to the application. The messages and AVPs of the application are defined in a dictionary file whose format is documented in diameter_dict(4) while the callback module is documented here. The callback module implements the Diameter application-specific functionality of a service.

A callback module must export all of the functions documented below. The functions themselves are of three distinct flavours:

• peer_up/3 and peer_down/3 signal the attainment or loss of connectivity with a Diameter peer.

• pick_peer/4, prepare_request/3, prepare_retransmit/3, handle_answer/4 and handle_error/4 are (or may be) called as a consequence of a call to diameter:call/4 to send an outgoing Diameter request message.

• handle_request/3 is called in response to an incoming Diameter request message.

capabilities() = #diameter_caps{}

A record containing the identities of the local Diameter node and the remote Diameter peer having an established transport connection, as well as the capabilities as determined by capabilities exchange. Each field of the record is a 2-tuple consisting of values for the (local) host and (remote) peer. Optional or possibly multiple values are encoded as lists of values, mandatory values as the bare value.

message() = record() | list()

The representation of a Diameter message as passed to diameter:call/4. The record representation is as outlined in diameter_dict(4): a message as defined in a dictionary file is encoded as a record with one field for each component AVP. Equivalently, a message can also be encoded as a list whose head is the atom-valued message name (the record name minus any prefix specified in the relevant dictionary file) and whose tail is a list of {FieldName, FieldValue} pairs.

A third representation allows a message to be specified as a list whose head is a #diameter_header{} record and whose tail is a list of #diameter_avp{} records. This representation is used by diameter itself when relaying requests as directed by the return value of a handle_request/3 callback. It differs from the other other two in that it bypasses the checks for messages that do not agree with their definitions in the dictionary in question (since relays agents must handle arbitrary request): messages are sent exactly as specified.

packet() = #diameter_packet{}

A container for incoming and outgoing Diameter messages that's passed through encode/decode and transport. Fields should not be set in return values except as documented.

peer_ref() = term()

A term identifying a transport connection with a Diameter peer. Should be treated opaquely.

peer() = {peer_ref(), capabilities()}

A tuple representing a Diameter peer connection.

state() = term()

The state maintained by the application callback functions peer_up/3, peer_down/3 and (optionally) pick_peer/4. The initial state is configured in the call to diameter:start_service/2 that configures the application on a service. Callback functions returning a state are evaluated in a common service-specific process while those not returning state are evaluated in a request-specific process.

Types:

Invoked when a transport connection has been established and a successful capabilities exchange has indicated that the peer supports the Diameter application of the application on which the callback module in question has been configured.

Types:

Invoked when a transport connection has been lost following a previous call to peer_up/3.

Types:

Invoked as a consequence of a call to diameter:call/4 to select a destination peer for an outgoing request, the return value indicating the selected peer.

The candidate peers list will only include those which are selected by any filter option specified in the call to diameter:call/4, and only those which have indicated support for the Diameter application in question. The order of the elements is unspecified except that any peers whose Origin-Host and Origin-Realm matches that of the outgoing request (in the sense of a {filter, {all, [host, realm]}} option to diameter:call/4) will be placed at the head of the list.

The return values false and {false, State} are equivalent when callback state is mutable, as are {ok, Peer} and {Peer, State}. Returning a peer as false causes {error, no_connection} to be returned from diameter:call/4. Returning a peer() from an initial pick_peer/4 callback will result in a prepare_request/3 callback followed by either handle_answer/4 or handle_error/4 depending on whether or not an answer message is received from the peer. If transport with the peer is lost before this then a new pick_peer/4 callback takes place to select an alternate peer.

Note that there is no guarantee that a pick_peer/4 callback to select an alternate peer will be followed by any additional callbacks, only that the initial pick_peer/4 will be, since a retransmission to an alternate peer is abandoned if an answer is received from a previously selected peer.

Types:

Invoked to return a request for encoding and transport. Allows the sender to access the selected peer's capabilities in order to set (for example) Destination-Host and/or Destination-Realm in the outgoing request, although the callback need not be limited to this usage. Many implementations may simply want to return {send, Packet}

A returned packet() should set the request to be encoded in its msg field and can set the transport_data field in order to pass information to the transport module. Extra arguments passed to diameter:call/4 can be used to communicate transport data to the callback. A returned packet() can also set the header field to a #diameter_header{} record in order to specify values that should be preserved in the outgoing request, although this should typically not be necessary and allows the callback to set header values inappropriately. A returned length, cmd_code or application_id is ignored.

Returning {discard, Reason} causes the request to be aborted and the diameter:call/4 for which the callback has taken place to return {error, Reason}. Returning discard is equivalent to returning {discard, discarded}.

Types:

Invoked to return a request for encoding and retransmission. Has the same role as prepare_request/3 in the case that a peer connection is lost an an alternate peer selected but the argument packet() is as returned by the initial prepare_request/3.

Returning {discard, Reason} causes the request to be aborted and a handle_error/4 callback to take place with Reason as initial argument. Returning discard is equivalent to returning {discard, discarded}.

Types:

Invoked when an answer message is received from a peer. The return value is returned from the call to diameter:call/4 for which the callback takes place unless the detach option was specified.

The decoded answer record is in the msg field of the argument packet(), the undecoded binary in the packet field. Request is the outgoing request message as was returned from prepare_request/3 or prepare_retransmit/3 before the request was passed to the transport.

For any given call to diameter:call/4 there is at most one call to the handle_answer callback of the application in question: any duplicate answer (due to retransmission or otherwise) is discarded. Similarly, only one of handle_answer/4 or handle_error/4 is called for any given request.

By default, an incoming answer message that cannot be successfully decoded causes the request process in question to fail, causing the relevant call to diameter:call/4 to return {error, failure} (unless the detach option was specified). In particular, there is no handle_error/4 callback in this case. Application configuration may change this behaviour as described for diameter:start_service/2.

Types:

Invoked when an error occurs before an answer message is received from a peer in response to an outgoing request. The return value is returned from the call to diameter:call/4 for which the callback takes place (unless the detach option was specified).

Reason timeout indicates that an answer message has not been received within the required time. Reason failover indicates that the transport connection to the peer to which the request has been sent has been lost but that not alternate node was available, possibly because a pick_peer/4 callback returned false.

Types:

Invoked when a request message is received from a peer. The application in which the callback takes place (that is, the callback module as configured with diameter:start_service/2) is determined by the Application Identifier in the header of the incoming request message, the selected module being the one whose corresponding dictionary declares itself as defining either the application in question or the Relay application.

The argument packet() has the following signature.

#diameter_packet{header = #diameter_header{},
                 avps   = [#diameter_avp{}],
                 msg    = record() | undefined,
                 errors = [Unsigned32() | {Unsigned32(), #diameter_avp{}}],
                 bin    = binary(),
                 transport_data = term()}

The msg field will be undefined only in case the request has been received in the relay application. Otherwise it contains the record representing the request as outlined in diameter_dict(4).

The errors field specifies any Result-Code's identifying errors that were encountered in decoding the request. In this case diameter will set both Result-Code and Failed-AVP AVP's in a returned answer message() before sending it to the peer: the returned message() need only set any other required AVP's. Note that the errors detected by diameter are all of the 5xxx series (Permanent Failures). The errors list is empty if the request has been received in the relay application.

The transport_data field contains an arbitrary term passed into diameter from the transport module in question, or the atom undefined if the transport specified no data. The term is preserved in the packet() containing any answer message sent back to the transport process unless another value is explicitly specified.

The semantics of each of the possible return values are as follows.

{reply, message()}

Send the specified answer message to the peer.

{protocol_error, 3000..3999}

Send an answer message to the peer containing the specified protocol error. Equivalent to

{reply, ['answer-message' | Avps]

where Avps sets the Origin-Host, Origin-Realm, the specified Result-Code and (if the request sent one) Session-Id AVP's.

Note that RFC 3588 mandates that only answers with a 3xxx series Result-Code (protocol errors) may set the E bit. Returning a non-3xxx value in a protocol_error tuple will cause the request process in question to fail.

{relay, Opts}

Relay a request to another peer in the role of a Diameter relay agent. If a routing loop is detected then the request is answered with 3005 (DIAMETER_LOOP_DETECTED). Otherwise a Route-Record AVP (containing the sending peer's Origin-Host) is added to the request and pick_peer/4 and subsequent callbacks take place just as if diameter:call/4 had been called explicitly. The End-to-End Identifier of the incoming request is preserved in the header of the relayed request.

The returned Opts should not specify detach. A subsequent handle_answer/4 callback for the relayed request must return its first argument, the #diameter_packet{} record containing the answer message. Note that the extra option can be specified to supply arguments that can distinguish the relay case from others if so desired. Any other return value (for example, from a handle_error/4 callback) causes the request to be answered with 3002 (DIAMETER_UNABLE_TO_DELIVER).

discard

Discard the request.

{eval, Action, PostF}

Handle the request as if Action has been returned and then evaluate PostF in the request process.

Note that protocol errors detected by diameter will result in an answer message without handle_request/3 being invoked.