FreeBSD is a multi-tasking operating system. Each program running at any one time is called a process. Every running command starts at least one new process and there are a number of system processes that are run by FreeBSD.
Each process is uniquely identified by a number called a
process ID (PID).
Similar to files, each process has one owner and group, and
the owner and group permissions are used to determine which
files and devices the process can open. Most processes also
have a parent process that started them. For example, the
shell is a process, and any command started in the shell is a
process which has the shell as its parent process. The
exception is a special process called init(8) which is
always the first process to start at boot time and which always
has a PID of 1.
Some programs are not designed to be run with continuous user input and disconnect from the terminal at the first opportunity. For example, a web server responds to web requests, rather than user input. Mail servers are another example of this type of application. These types of programs are known as daemons. The term daemon comes from Greek mythology and represents an entity that is neither good nor evil, and which invisibly performs useful tasks. This is why the BSD mascot is the cheerful-looking daemon with sneakers and a pitchfork.
There is a convention to name programs that normally run as
daemons with a trailing “d”. For example,
BIND is the Berkeley Internet Name
Domain, but the actual program that executes is
named. The
Apache web server program is
httpd and the line printer spooling daemon
is lpd. This is only a naming convention.
For example, the main mail daemon for the
Sendmail application is
sendmail, and not
maild.
To see the processes running on the system, use ps(1) or top(1). To display a static list of the currently running processes, their PIDs, how much memory they are using, and the command they were started with, use ps(1). To display all the running processes and update the display every few seconds in order to interactively see what the computer is doing, use top(1).
By default, ps(1) only shows the commands that are running and owned by the user. For example:
%psPID TT STAT TIME COMMAND 8203 0 Ss 0:00.59 /bin/csh 8895 0 R+ 0:00.00 ps
The output from ps(1) is organized into a number of
columns. The PID column displays the
process ID. PIDs are assigned starting at
1, go up to 99999, then wrap around back to the beginning.
However, a PID is not reassigned if it is
already in use. The TT column shows the
tty the program is running on and STAT
shows the program's state. TIME is the
amount of time the program has been running on the CPU. This
is usually not the elapsed time since the program was started,
as most programs spend a lot of time waiting for things to
happen before they need to spend time on the CPU. Finally,
COMMAND is the command that was used to
start the program.
A number of different options are available to change the
information that is displayed. One of the most useful sets is
auxww, where a displays
information about all the running processes of all users,
u displays the username and memory usage of
the process' owner, x displays
information about daemon processes, and ww
causes ps(1) to display the full command line for each
process, rather than truncating it once it gets too long to
fit on the screen.
The output from top(1) is similar:
%toplast pid: 9609; load averages: 0.56, 0.45, 0.36 up 0+00:20:03 10:21:46 107 processes: 2 running, 104 sleeping, 1 zombie CPU: 6.2% user, 0.1% nice, 8.2% system, 0.4% interrupt, 85.1% idle Mem: 541M Active, 450M Inact, 1333M Wired, 4064K Cache, 1498M Free ARC: 992M Total, 377M MFU, 589M MRU, 250K Anon, 5280K Header, 21M Other Swap: 2048M Total, 2048M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 557 root 1 -21 r31 136M 42296K select 0 2:20 9.96% Xorg 8198 dru 2 52 0 449M 82736K select 3 0:08 5.96% kdeinit4 8311 dru 27 30 0 1150M 187M uwait 1 1:37 0.98% firefox 431 root 1 20 0 14268K 1728K select 0 0:06 0.98% moused 9551 dru 1 21 0 16600K 2660K CPU3 3 0:01 0.98% top 2357 dru 4 37 0 718M 141M select 0 0:21 0.00% kdeinit4 8705 dru 4 35 0 480M 98M select 2 0:20 0.00% kdeinit4 8076 dru 6 20 0 552M 113M uwait 0 0:12 0.00% soffice.bin 2623 root 1 30 10 12088K 1636K select 3 0:09 0.00% powerd 2338 dru 1 20 0 440M 84532K select 1 0:06 0.00% kwin 1427 dru 5 22 0 605M 86412K select 1 0:05 0.00% kdeinit4
The output is split into two sections. The header (the
first five or six lines) shows the PID of
the last process to run, the system load averages (which are a
measure of how busy the system is), the system uptime (time
since the last reboot) and the current time. The other
figures in the header relate to how many processes are
running, how much memory and swap space has been used, and how
much time the system is spending in different CPU states. If
the ZFS file system module has been loaded,
an ARC line indicates how much data was
read from the memory cache instead of from disk.
Below the header is a series of columns containing similar information to the output from ps(1), such as the PID, username, amount of CPU time, and the command that started the process. By default, top(1) also displays the amount of memory space taken by the process. This is split into two columns: one for total size and one for resident size. Total size is how much memory the application has needed and the resident size is how much it is actually using now.
top(1) automatically updates the display every two
seconds. A different interval can be specified with
-s.
One way to communicate with any running process or daemon
is to send a signal using kill(1).
There are a number of different signals; some have a specific
meaning while others are described in the application's
documentation. A user can only send a signal to a process
they own and sending a signal to someone else's process will
result in a permission denied error. The exception is the
root user, who can
send signals to anyone's processes.
The operating system can also send a signal to a process.
If an application is badly written and tries to access memory
that it is not supposed to, FreeBSD will send the process the
“Segmentation Violation” signal
(SIGSEGV). If an application has been
written to use the alarm(3) system call to be alerted
after a period of time has elapsed, it will be sent the
“Alarm” signal
(SIGALRM).
Two signals can be used to stop a process:
SIGTERM and SIGKILL.
SIGTERM is the polite way to kill a process
as the process can read the signal, close any log files it may
have open, and attempt to finish what it is doing before
shutting down. In some cases, a process may ignore
SIGTERM if it is in the middle of some task
that can not be interrupted.
SIGKILL can not be ignored by a
process. Sending a SIGKILL to a
process will usually stop that process there and then.
[1].
Other commonly used signals are SIGHUP,
SIGUSR1, and SIGUSR2.
Since these are general purpose signals, different
applications will respond differently.
For example, after changing a web server's configuration
file, the web server needs to be told to re-read its
configuration. Restarting httpd would
result in a brief outage period on the web server. Instead,
send the daemon the SIGHUP signal. Be
aware that different daemons will have different behavior, so
refer to the documentation for the daemon to determine if
SIGHUP will achieve the desired
results.
This example shows how to send a signal to
inetd(8). The inetd(8) configuration file is
/etc/inetd.conf, and inetd(8) will
re-read this configuration file when it is sent a
SIGHUP.
Find the PID of the process to send the signal to using pgrep(1). In this example, the PID for inetd(8) is 198:
%pgrep -l inetd198 inetd -wW
Use kill(1) to send the signal. Because
inetd(8) is owned by
root, use
su(1) to become
root
first.
%suPassword:#/bin/kill -s HUP 198
Like most UNIX® commands, kill(1) will not print
any output if it is successful. If a signal is sent to a
process not owned by that user, the message
kill: PID: Operation
not permitted will be displayed. Mistyping
the PID will either send the signal to
the wrong process, which could have negative results, or
will send the signal to a PID that is
not currently in use, resulting in the error
kill: PID: No such
process.
/bin/kill?: Many shells provide kill as a
built in command, meaning that the shell will send the
signal directly, rather than running
/bin/kill. Be aware that different
shells have a different syntax for specifying the name
of the signal to send. Rather than try to learn all of
them, it can be simpler to specify
/bin/kill.
When sending other signals, substitute
TERM or KILL with the
name of the signal.
[1] There are a few tasks that can not be interrupted. For example, if the process is trying to read from a file that is on another computer on the network, and the other computer is unavailable, the process is said to be “uninterruptible”. Eventually the process will time out, typically after two minutes. As soon as this time out occurs the process will be killed.
All FreeBSD documents are available for download at http://ftp.FreeBSD.org/pub/FreeBSD/doc/
Questions that are not answered by the
documentation may be
sent to <[email protected]>.
Send questions about this document to <[email protected]>.