IP address lengths (bytes).
const (
IPv4len = 4
IPv6len = 16
)
Well-known IPv4 addresses
var (
IPv4bcast = IPv4(255, 255, 255, 255) // limited broadcast
IPv4allsys = IPv4(224, 0, 0, 1) // all systems
IPv4allrouter = IPv4(224, 0, 0, 2) // all routers
IPv4zero = IPv4(0, 0, 0, 0) // all zeros
)
Well-known IPv6 addresses
var (
IPv6zero = IP{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
IPv6unspecified = IP{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
IPv6loopback = IP{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1}
IPv6interfacelocalallnodes = IP{0xff, 0x01, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x01}
IPv6linklocalallnodes = IP{0xff, 0x02, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x01}
IPv6linklocalallrouters = IP{0xff, 0x02, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x02}
)
DefaultResolver is the resolver used by the package-level Lookup functions and by Dialers without a specified Resolver.
var DefaultResolver = &Resolver{}
Various errors contained in OpError.
var (
ErrWriteToConnected = errors.New("use of WriteTo with pre-connected connection")
)
func InterfaceAddrs() ([]Addr, error)
InterfaceAddrs returns a list of the system's unicast interface addresses.
The returned list does not identify the associated interface; use Interfaces and Interface.Addrs for more detail.
func Interfaces() ([]Interface, error)
Interfaces returns a list of the system's network interfaces.
func JoinHostPort(host, port string) string
JoinHostPort combines host and port into a network address of the form "host:port". If host contains a colon, as found in literal IPv6 addresses, then JoinHostPort returns "[host]:port".
See func Dial for a description of the host and port parameters.
func LookupAddr(addr string) (names []string, err error)
LookupAddr performs a reverse lookup for the given address, returning a list of names mapping to that address.
When using the host C library resolver, at most one result will be returned. To bypass the host resolver, use a custom Resolver.
func LookupCNAME(host string) (cname string, err error)
LookupCNAME returns the canonical name for the given host. Callers that do not care about the canonical name can call LookupHost or LookupIP directly; both take care of resolving the canonical name as part of the lookup.
A canonical name is the final name after following zero or more CNAME records. LookupCNAME does not return an error if host does not contain DNS "CNAME" records, as long as host resolves to address records.
func LookupHost(host string) (addrs []string, err error)
LookupHost looks up the given host using the local resolver. It returns a slice of that host's addresses.
func LookupIP(host string) ([]IP, error)
LookupIP looks up host using the local resolver. It returns a slice of that host's IPv4 and IPv6 addresses.
func LookupMX(name string) ([]*MX, error)
LookupMX returns the DNS MX records for the given domain name sorted by preference.
func LookupNS(name string) ([]*NS, error)
LookupNS returns the DNS NS records for the given domain name.
func LookupPort(network, service string) (port int, err error)
LookupPort looks up the port for the given network and service.
func LookupSRV(service, proto, name string) (cname string, addrs []*SRV, err error)
LookupSRV tries to resolve an SRV query of the given service, protocol, and domain name. The proto is "tcp" or "udp". The returned records are sorted by priority and randomized by weight within a priority.
LookupSRV constructs the DNS name to look up following RFC 2782. That is, it looks up _service._proto.name. To accommodate services publishing SRV records under non-standard names, if both service and proto are empty strings, LookupSRV looks up name directly.
func LookupTXT(name string) ([]string, error)
LookupTXT returns the DNS TXT records for the given domain name.
func SplitHostPort(hostport string) (host, port string, err error)
SplitHostPort splits a network address of the form "host:port", "host%zone:port", "[host]:port" or "[host%zone]:port" into host or host%zone and port.
A literal IPv6 address in hostport must be enclosed in square brackets, as in "[::1]:80", "[::1%lo0]:80".
See func Dial for a description of the hostport parameter, and host and port results.
Addr represents a network end point address.
The two methods Network and String conventionally return strings that can be passed as the arguments to Dial, but the exact form and meaning of the strings is up to the implementation.
type Addr interface {
Network() string // name of the network (for example, "tcp", "udp")
String() string // string form of address (for example, "192.0.2.1:25", "[2001:db8::1]:80")
}
type AddrError struct {
Err string
Addr string
}
func (e *AddrError) Error() string
func (e *AddrError) Temporary() bool
func (e *AddrError) Timeout() bool
Buffers contains zero or more runs of bytes to write.
On certain machines, for certain types of connections, this is optimized into an OS-specific batch write operation (such as "writev").
type Buffers [][]byte
func (v *Buffers) Read(p []byte) (n int, err error)
func (v *Buffers) WriteTo(w io.Writer) (n int64, err error)
Conn is a generic stream-oriented network connection.
Multiple goroutines may invoke methods on a Conn simultaneously.
type Conn interface {
// Read reads data from the connection.
// Read can be made to time out and return an Error with Timeout() == true
// after a fixed time limit; see SetDeadline and SetReadDeadline.
Read(b []byte) (n int, err error)
// Write writes data to the connection.
// Write can be made to time out and return an Error with Timeout() == true
// after a fixed time limit; see SetDeadline and SetWriteDeadline.
Write(b []byte) (n int, err error)
// Close closes the connection.
// Any blocked Read or Write operations will be unblocked and return errors.
Close() error
// LocalAddr returns the local network address.
LocalAddr() Addr
// RemoteAddr returns the remote network address.
RemoteAddr() Addr
// SetDeadline sets the read and write deadlines associated
// with the connection. It is equivalent to calling both
// SetReadDeadline and SetWriteDeadline.
//
// A deadline is an absolute time after which I/O operations
// fail with a timeout (see type Error) instead of
// blocking. The deadline applies to all future and pending
// I/O, not just the immediately following call to Read or
// Write. After a deadline has been exceeded, the connection
// can be refreshed by setting a deadline in the future.
//
// An idle timeout can be implemented by repeatedly extending
// the deadline after successful Read or Write calls.
//
// A zero value for t means I/O operations will not time out.
SetDeadline(t time.Time) error
// SetReadDeadline sets the deadline for future Read calls
// and any currently-blocked Read call.
// A zero value for t means Read will not time out.
SetReadDeadline(t time.Time) error
// SetWriteDeadline sets the deadline for future Write calls
// and any currently-blocked Write call.
// Even if write times out, it may return n > 0, indicating that
// some of the data was successfully written.
// A zero value for t means Write will not time out.
SetWriteDeadline(t time.Time) error
}
func Dial(network, address string) (Conn, error)
Dial connects to the address on the named network.
Known networks are "tcp", "tcp4" (IPv4-only), "tcp6" (IPv6-only), "udp", "udp4" (IPv4-only), "udp6" (IPv6-only), "ip", "ip4" (IPv4-only), "ip6" (IPv6-only), "unix", "unixgram" and "unixpacket".
For TCP and UDP networks, the address has the form "host:port". The host must be a literal IP address, or a host name that can be resolved to IP addresses. The port must be a literal port number or a service name. If the host is a literal IPv6 address it must be enclosed in square brackets, as in "[2001:db8::1]:80" or "[fe80::1%zone]:80". The zone specifies the scope of the literal IPv6 address as defined in RFC 4007. The functions JoinHostPort and SplitHostPort manipulate a pair of host and port in this form. When using TCP, and the host resolves to multiple IP addresses, Dial will try each IP address in order until one succeeds.
Examples:
Dial("tcp", "golang.org:http")
Dial("tcp", "192.0.2.1:http")
Dial("tcp", "198.51.100.1:80")
Dial("udp", "[2001:db8::1]:domain")
Dial("udp", "[fe80::1%lo0]:53")
Dial("tcp", ":80")
For IP networks, the network must be "ip", "ip4" or "ip6" followed by a colon and a literal protocol number or a protocol name, and the address has the form "host". The host must be a literal IP address or a literal IPv6 address with zone. It depends on each operating system how the operating system behaves with a non-well known protocol number such as "0" or "255".
Examples:
Dial("ip4:1", "192.0.2.1")
Dial("ip6:ipv6-icmp", "2001:db8::1")
Dial("ip6:58", "fe80::1%lo0")
For TCP, UDP and IP networks, if the host is empty or a literal unspecified IP address, as in ":80", "0.0.0.0:80" or "[::]:80" for TCP and UDP, "", "0.0.0.0" or "::" for IP, the local system is assumed.
For Unix networks, the address must be a file system path.
func DialTimeout(network, address string, timeout time.Duration) (Conn, error)
DialTimeout acts like Dial but takes a timeout.
The timeout includes name resolution, if required. When using TCP, and the host in the address parameter resolves to multiple IP addresses, the timeout is spread over each consecutive dial, such that each is given an appropriate fraction of the time to connect.
See func Dial for a description of the network and address parameters.
func FileConn(f *os.File) (c Conn, err error)
FileConn returns a copy of the network connection corresponding to the open file f. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.
func Pipe() (Conn, Conn)
Pipe creates a synchronous, in-memory, full duplex network connection; both ends implement the Conn interface. Reads on one end are matched with writes on the other, copying data directly between the two; there is no internal buffering.
DNSConfigError represents an error reading the machine's DNS configuration. (No longer used; kept for compatibility.)
type DNSConfigError struct {
Err error
}
func (e *DNSConfigError) Error() string
func (e *DNSConfigError) Temporary() bool
func (e *DNSConfigError) Timeout() bool
DNSError represents a DNS lookup error.
type DNSError struct {
Err string // description of the error
Name string // name looked for
Server string // server used
IsTimeout bool // if true, timed out; not all timeouts set this
IsTemporary bool // if true, error is temporary; not all errors set this
}
func (e *DNSError) Error() string
func (e *DNSError) Temporary() bool
Temporary reports whether the DNS error is known to be temporary. This is not always known; a DNS lookup may fail due to a temporary error and return a DNSError for which Temporary returns false.
func (e *DNSError) Timeout() bool
Timeout reports whether the DNS lookup is known to have timed out. This is not always known; a DNS lookup may fail due to a timeout and return a DNSError for which Timeout returns false.
A Dialer contains options for connecting to an address.
The zero value for each field is equivalent to dialing without that option. Dialing with the zero value of Dialer is therefore equivalent to just calling the Dial function.
type Dialer struct {
// Timeout is the maximum amount of time a dial will wait for
// a connect to complete. If Deadline is also set, it may fail
// earlier.
//
// The default is no timeout.
//
// When using TCP and dialing a host name with multiple IP
// addresses, the timeout may be divided between them.
//
// With or without a timeout, the operating system may impose
// its own earlier timeout. For instance, TCP timeouts are
// often around 3 minutes.
Timeout time.Duration
// Deadline is the absolute point in time after which dials
// will fail. If Timeout is set, it may fail earlier.
// Zero means no deadline, or dependent on the operating system
// as with the Timeout option.
Deadline time.Time
// LocalAddr is the local address to use when dialing an
// address. The address must be of a compatible type for the
// network being dialed.
// If nil, a local address is automatically chosen.
LocalAddr Addr
// DualStack enables RFC 6555-compliant "Happy Eyeballs"
// dialing when the network is "tcp" and the host in the
// address parameter resolves to both IPv4 and IPv6 addresses.
// This allows a client to tolerate networks where one address
// family is silently broken.
DualStack bool
// FallbackDelay specifies the length of time to wait before
// spawning a fallback connection, when DualStack is enabled.
// If zero, a default delay of 300ms is used.
FallbackDelay time.Duration
// KeepAlive specifies the keep-alive period for an active
// network connection.
// If zero, keep-alives are not enabled. Network protocols
// that do not support keep-alives ignore this field.
KeepAlive time.Duration
// Resolver optionally specifies an alternate resolver to use.
Resolver *Resolver
// Cancel is an optional channel whose closure indicates that
// the dial should be canceled. Not all types of dials support
// cancelation.
//
// Deprecated: Use DialContext instead.
Cancel <-chan struct{}
}
func (d *Dialer) Dial(network, address string) (Conn, error)
Dial connects to the address on the named network.
See func Dial for a description of the network and address parameters.
func (d *Dialer) DialContext(ctx context.Context, network, address string) (Conn, error)
DialContext connects to the address on the named network using the provided context.
The provided Context must be non-nil. If the context expires before the connection is complete, an error is returned. Once successfully connected, any expiration of the context will not affect the connection.
When using TCP, and the host in the address parameter resolves to multiple network addresses, any dial timeout (from d.Timeout or ctx) is spread over each consecutive dial, such that each is given an appropriate fraction of the time to connect. For example, if a host has 4 IP addresses and the timeout is 1 minute, the connect to each single address will be given 15 seconds to complete before trying the next one.
See func Dial for a description of the network and address parameters.
An Error represents a network error.
type Error interface {
error
Timeout() bool // Is the error a timeout?
Temporary() bool // Is the error temporary?
}
type Flags uint
const (
FlagUp Flags = 1 << iota // interface is up
FlagBroadcast // interface supports broadcast access capability
FlagLoopback // interface is a loopback interface
FlagPointToPoint // interface belongs to a point-to-point link
FlagMulticast // interface supports multicast access capability
)
func (f Flags) String() string
A HardwareAddr represents a physical hardware address.
type HardwareAddr []byte
func ParseMAC(s string) (hw HardwareAddr, err error)
ParseMAC parses s as an IEEE 802 MAC-48, EUI-48, EUI-64, or a 20-octet IP over InfiniBand link-layer address using one of the following formats:
01:23:45:67:89:ab 01:23:45:67:89:ab:cd:ef 01:23:45:67:89:ab:cd:ef:00:00:01:23:45:67:89:ab:cd:ef:00:00 01-23-45-67-89-ab 01-23-45-67-89-ab-cd-ef 01-23-45-67-89-ab-cd-ef-00-00-01-23-45-67-89-ab-cd-ef-00-00 0123.4567.89ab 0123.4567.89ab.cdef 0123.4567.89ab.cdef.0000.0123.4567.89ab.cdef.0000
func (a HardwareAddr) String() string
An IP is a single IP address, a slice of bytes. Functions in this package accept either 4-byte (IPv4) or 16-byte (IPv6) slices as input.
Note that in this documentation, referring to an IP address as an IPv4 address or an IPv6 address is a semantic property of the address, not just the length of the byte slice: a 16-byte slice can still be an IPv4 address.
type IP []byte
func IPv4(a, b, c, d byte) IP
IPv4 returns the IP address (in 16-byte form) of the IPv4 address a.b.c.d.
▹ Example
func ParseCIDR(s string) (IP, *IPNet, error)
ParseCIDR parses s as a CIDR notation IP address and prefix length, like "192.0.2.0/24" or "2001:db8::/32", as defined in RFC 4632 and RFC 4291.
It returns the IP address and the network implied by the IP and prefix length. For example, ParseCIDR("192.0.2.1/24") returns the IP address 192.0.2.1 and the network 192.0.2.0/24.
▹ Example
func ParseIP(s string) IP
ParseIP parses s as an IP address, returning the result. The string s can be in dotted decimal ("192.0.2.1") or IPv6 ("2001:db8::68") form. If s is not a valid textual representation of an IP address, ParseIP returns nil.
▹ Example
func (ip IP) DefaultMask() IPMask
DefaultMask returns the default IP mask for the IP address ip. Only IPv4 addresses have default masks; DefaultMask returns nil if ip is not a valid IPv4 address.
▹ Example
func (ip IP) Equal(x IP) bool
Equal reports whether ip and x are the same IP address. An IPv4 address and that same address in IPv6 form are considered to be equal.
func (ip IP) IsGlobalUnicast() bool
IsGlobalUnicast reports whether ip is a global unicast address.
The identification of global unicast addresses uses address type identification as defined in RFC 1122, RFC 4632 and RFC 4291 with the exception of IPv4 directed broadcast addresses. It returns true even if ip is in IPv4 private address space or local IPv6 unicast address space.
func (ip IP) IsInterfaceLocalMulticast() bool
IsInterfaceLocalMulticast reports whether ip is an interface-local multicast address.
func (ip IP) IsLinkLocalMulticast() bool
IsLinkLocalMulticast reports whether ip is a link-local multicast address.
func (ip IP) IsLinkLocalUnicast() bool
IsLinkLocalUnicast reports whether ip is a link-local unicast address.
func (ip IP) IsLoopback() bool
IsLoopback reports whether ip is a loopback address.
func (ip IP) IsMulticast() bool
IsMulticast reports whether ip is a multicast address.
func (ip IP) IsUnspecified() bool
IsUnspecified reports whether ip is an unspecified address, either the IPv4 address "0.0.0.0" or the IPv6 address "::".
func (ip IP) MarshalText() ([]byte, error)
MarshalText implements the encoding.TextMarshaler interface. The encoding is the same as returned by String, with one exception: When len(ip) is zero, it returns an empty slice.
func (ip IP) Mask(mask IPMask) IP
Mask returns the result of masking the IP address ip with mask.
▹ Example
func (ip IP) String() string
String returns the string form of the IP address ip. It returns one of 4 forms:
- "<nil>", if ip has length 0
- dotted decimal ("192.0.2.1"), if ip is an IPv4 or IP4-mapped IPv6 address
- IPv6 ("2001:db8::1"), if ip is a valid IPv6 address
- the hexadecimal form of ip, without punctuation, if no other cases apply
func (ip IP) To16() IP
To16 converts the IP address ip to a 16-byte representation. If ip is not an IP address (it is the wrong length), To16 returns nil.
func (ip IP) To4() IP
To4 converts the IPv4 address ip to a 4-byte representation. If ip is not an IPv4 address, To4 returns nil.
func (ip *IP) UnmarshalText(text []byte) error
UnmarshalText implements the encoding.TextUnmarshaler interface. The IP address is expected in a form accepted by ParseIP.
IPAddr represents the address of an IP end point.
type IPAddr struct {
IP IP
Zone string // IPv6 scoped addressing zone
}
func ResolveIPAddr(network, address string) (*IPAddr, error)
ResolveIPAddr returns an address of IP end point.
The network must be an IP network name.
If the host in the address parameter is not a literal IP address, ResolveIPAddr resolves the address to an address of IP end point. Otherwise, it parses the address as a literal IP address. The address parameter can use a host name, but this is not recommended, because it will return at most one of the host name's IP addresses.
See func Dial for a description of the network and address parameters.
func (a *IPAddr) Network() string
Network returns the address's network name, "ip".
func (a *IPAddr) String() string
IPConn is the implementation of the Conn and PacketConn interfaces for IP network connections.
type IPConn struct {
// contains filtered or unexported fields
}
func DialIP(network string, laddr, raddr *IPAddr) (*IPConn, error)
DialIP acts like Dial for IP networks.
The network must be an IP network name; see func Dial for details.
If laddr is nil, a local address is automatically chosen. If the IP field of raddr is nil or an unspecified IP address, the local system is assumed.
func ListenIP(network string, laddr *IPAddr) (*IPConn, error)
ListenIP acts like ListenPacket for IP networks.
The network must be an IP network name; see func Dial for details.
If the IP field of laddr is nil or an unspecified IP address, ListenIP listens on all available IP addresses of the local system except multicast IP addresses.
func (c *IPConn) Close() error
Close closes the connection.
func (c *IPConn) File() (f *os.File, err error)
File sets the underlying os.File to blocking mode and returns a copy. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.
The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.
On Unix systems this will cause the SetDeadline methods to stop working.
func (c *IPConn) LocalAddr() Addr
LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.
func (c *IPConn) Read(b []byte) (int, error)
Read implements the Conn Read method.
func (c *IPConn) ReadFrom(b []byte) (int, Addr, error)
ReadFrom implements the PacketConn ReadFrom method.
func (c *IPConn) ReadFromIP(b []byte) (int, *IPAddr, error)
ReadFromIP acts like ReadFrom but returns an IPAddr.
func (c *IPConn) ReadMsgIP(b, oob []byte) (n, oobn, flags int, addr *IPAddr, err error)
ReadMsgIP reads a message from c, copying the payload into b and the associated out-of-band data into oob. It returns the number of bytes copied into b, the number of bytes copied into oob, the flags that were set on the message and the source address of the message.
The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.
func (c *IPConn) RemoteAddr() Addr
RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.
func (c *IPConn) SetDeadline(t time.Time) error
SetDeadline implements the Conn SetDeadline method.
func (c *IPConn) SetReadBuffer(bytes int) error
SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.
func (c *IPConn) SetReadDeadline(t time.Time) error
SetReadDeadline implements the Conn SetReadDeadline method.
func (c *IPConn) SetWriteBuffer(bytes int) error
SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.
func (c *IPConn) SetWriteDeadline(t time.Time) error
SetWriteDeadline implements the Conn SetWriteDeadline method.
func (c *IPConn) SyscallConn() (syscall.RawConn, error)
SyscallConn returns a raw network connection. This implements the syscall.Conn interface.
func (c *IPConn) Write(b []byte) (int, error)
Write implements the Conn Write method.
func (c *IPConn) WriteMsgIP(b, oob []byte, addr *IPAddr) (n, oobn int, err error)
WriteMsgIP writes a message to addr via c, copying the payload from b and the associated out-of-band data from oob. It returns the number of payload and out-of-band bytes written.
The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.
func (c *IPConn) WriteTo(b []byte, addr Addr) (int, error)
WriteTo implements the PacketConn WriteTo method.
func (c *IPConn) WriteToIP(b []byte, addr *IPAddr) (int, error)
WriteToIP acts like WriteTo but takes an IPAddr.
An IP mask is an IP address.
type IPMask []byte
func CIDRMask(ones, bits int) IPMask
CIDRMask returns an IPMask consisting of `ones' 1 bits followed by 0s up to a total length of `bits' bits. For a mask of this form, CIDRMask is the inverse of IPMask.Size.
▹ Example
func IPv4Mask(a, b, c, d byte) IPMask
IPv4Mask returns the IP mask (in 4-byte form) of the IPv4 mask a.b.c.d.
▹ Example
func (m IPMask) Size() (ones, bits int)
Size returns the number of leading ones and total bits in the mask. If the mask is not in the canonical form--ones followed by zeros--then Size returns 0, 0.
func (m IPMask) String() string
String returns the hexadecimal form of m, with no punctuation.
An IPNet represents an IP network.
type IPNet struct {
IP IP // network number
Mask IPMask // network mask
}
func (n *IPNet) Contains(ip IP) bool
Contains reports whether the network includes ip.
func (n *IPNet) Network() string
Network returns the address's network name, "ip+net".
func (n *IPNet) String() string
String returns the CIDR notation of n like "192.0.2.1/24" or "2001:db8::/48" as defined in RFC 4632 and RFC 4291. If the mask is not in the canonical form, it returns the string which consists of an IP address, followed by a slash character and a mask expressed as hexadecimal form with no punctuation like "198.51.100.1/c000ff00".
Interface represents a mapping between network interface name and index. It also represents network interface facility information.
type Interface struct {
Index int // positive integer that starts at one, zero is never used
MTU int // maximum transmission unit
Name string // e.g., "en0", "lo0", "eth0.100"
HardwareAddr HardwareAddr // IEEE MAC-48, EUI-48 and EUI-64 form
Flags Flags // e.g., FlagUp, FlagLoopback, FlagMulticast
}
func InterfaceByIndex(index int) (*Interface, error)
InterfaceByIndex returns the interface specified by index.
On Solaris, it returns one of the logical network interfaces sharing the logical data link; for more precision use InterfaceByName.
func InterfaceByName(name string) (*Interface, error)
InterfaceByName returns the interface specified by name.
func (ifi *Interface) Addrs() ([]Addr, error)
Addrs returns a list of unicast interface addresses for a specific interface.
func (ifi *Interface) MulticastAddrs() ([]Addr, error)
MulticastAddrs returns a list of multicast, joined group addresses for a specific interface.
type InvalidAddrError string
func (e InvalidAddrError) Error() string
func (e InvalidAddrError) Temporary() bool
func (e InvalidAddrError) Timeout() bool
A Listener is a generic network listener for stream-oriented protocols.
Multiple goroutines may invoke methods on a Listener simultaneously.
type Listener interface {
// Accept waits for and returns the next connection to the listener.
Accept() (Conn, error)
// Close closes the listener.
// Any blocked Accept operations will be unblocked and return errors.
Close() error
// Addr returns the listener's network address.
Addr() Addr
}
▹ Example
func FileListener(f *os.File) (ln Listener, err error)
FileListener returns a copy of the network listener corresponding to the open file f. It is the caller's responsibility to close ln when finished. Closing ln does not affect f, and closing f does not affect ln.
func Listen(network, address string) (Listener, error)
Listen announces on the local network address.
The network must be "tcp", "tcp4", "tcp6", "unix" or "unixpacket".
For TCP networks, if the host in the address parameter is empty or a literal unspecified IP address, Listen listens on all available unicast and anycast IP addresses of the local system. To only use IPv4, use network "tcp4". The address can use a host name, but this is not recommended, because it will create a listener for at most one of the host's IP addresses. If the port in the address parameter is empty or "0", as in "127.0.0.1:" or "[::1]:0", a port number is automatically chosen. The Addr method of Listener can be used to discover the chosen port.
See func Dial for a description of the network and address parameters.
An MX represents a single DNS MX record.
type MX struct {
Host string
Pref uint16
}
An NS represents a single DNS NS record.
type NS struct {
Host string
}
OpError is the error type usually returned by functions in the net package. It describes the operation, network type, and address of an error.
type OpError struct {
// Op is the operation which caused the error, such as
// "read" or "write".
Op string
// Net is the network type on which this error occurred,
// such as "tcp" or "udp6".
Net string
// For operations involving a remote network connection, like
// Dial, Read, or Write, Source is the corresponding local
// network address.
Source Addr
// Addr is the network address for which this error occurred.
// For local operations, like Listen or SetDeadline, Addr is
// the address of the local endpoint being manipulated.
// For operations involving a remote network connection, like
// Dial, Read, or Write, Addr is the remote address of that
// connection.
Addr Addr
// Err is the error that occurred during the operation.
Err error
}
func (e *OpError) Error() string
func (e *OpError) Temporary() bool
func (e *OpError) Timeout() bool
PacketConn is a generic packet-oriented network connection.
Multiple goroutines may invoke methods on a PacketConn simultaneously.
type PacketConn interface {
// ReadFrom reads a packet from the connection,
// copying the payload into b. It returns the number of
// bytes copied into b and the return address that
// was on the packet.
// ReadFrom can be made to time out and return
// an Error with Timeout() == true after a fixed time limit;
// see SetDeadline and SetReadDeadline.
ReadFrom(b []byte) (n int, addr Addr, err error)
// WriteTo writes a packet with payload b to addr.
// WriteTo can be made to time out and return
// an Error with Timeout() == true after a fixed time limit;
// see SetDeadline and SetWriteDeadline.
// On packet-oriented connections, write timeouts are rare.
WriteTo(b []byte, addr Addr) (n int, err error)
// Close closes the connection.
// Any blocked ReadFrom or WriteTo operations will be unblocked and return errors.
Close() error
// LocalAddr returns the local network address.
LocalAddr() Addr
// SetDeadline sets the read and write deadlines associated
// with the connection. It is equivalent to calling both
// SetReadDeadline and SetWriteDeadline.
//
// A deadline is an absolute time after which I/O operations
// fail with a timeout (see type Error) instead of
// blocking. The deadline applies to all future and pending
// I/O, not just the immediately following call to ReadFrom or
// WriteTo. After a deadline has been exceeded, the connection
// can be refreshed by setting a deadline in the future.
//
// An idle timeout can be implemented by repeatedly extending
// the deadline after successful ReadFrom or WriteTo calls.
//
// A zero value for t means I/O operations will not time out.
SetDeadline(t time.Time) error
// SetReadDeadline sets the deadline for future ReadFrom calls
// and any currently-blocked ReadFrom call.
// A zero value for t means ReadFrom will not time out.
SetReadDeadline(t time.Time) error
// SetWriteDeadline sets the deadline for future WriteTo calls
// and any currently-blocked WriteTo call.
// Even if write times out, it may return n > 0, indicating that
// some of the data was successfully written.
// A zero value for t means WriteTo will not time out.
SetWriteDeadline(t time.Time) error
}
func FilePacketConn(f *os.File) (c PacketConn, err error)
FilePacketConn returns a copy of the packet network connection corresponding to the open file f. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.
func ListenPacket(network, address string) (PacketConn, error)
ListenPacket announces on the local network address.
The network must be "udp", "udp4", "udp6", "unixgram", or an IP transport. The IP transports are "ip", "ip4", or "ip6" followed by a colon and a literal protocol number or a protocol name, as in "ip:1" or "ip:icmp".
For UDP and IP networks, if the host in the address parameter is empty or a literal unspecified IP address, ListenPacket listens on all available IP addresses of the local system except multicast IP addresses. To only use IPv4, use network "udp4" or "ip4:proto". The address can use a host name, but this is not recommended, because it will create a listener for at most one of the host's IP addresses. If the port in the address parameter is empty or "0", as in "127.0.0.1:" or "[::1]:0", a port number is automatically chosen. The LocalAddr method of PacketConn can be used to discover the chosen port.
See func Dial for a description of the network and address parameters.
A ParseError is the error type of literal network address parsers.
type ParseError struct {
// Type is the type of string that was expected, such as
// "IP address", "CIDR address".
Type string
// Text is the malformed text string.
Text string
}
func (e *ParseError) Error() string
A Resolver looks up names and numbers.
A nil *Resolver is equivalent to a zero Resolver.
type Resolver struct {
// PreferGo controls whether Go's built-in DNS resolver is preferred
// on platforms where it's available. It is equivalent to setting
// GODEBUG=netdns=go, but scoped to just this resolver.
PreferGo bool
// StrictErrors controls the behavior of temporary errors
// (including timeout, socket errors, and SERVFAIL) when using
// Go's built-in resolver. For a query composed of multiple
// sub-queries (such as an A+AAAA address lookup, or walking the
// DNS search list), this option causes such errors to abort the
// whole query instead of returning a partial result. This is
// not enabled by default because it may affect compatibility
// with resolvers that process AAAA queries incorrectly.
StrictErrors bool
// Dial optionally specifies an alternate dialer for use by
// Go's built-in DNS resolver to make TCP and UDP connections
// to DNS services. The host in the address parameter will
// always be a literal IP address and not a host name, and the
// port in the address parameter will be a literal port number
// and not a service name.
// If the Conn returned is also a PacketConn, sent and received DNS
// messages must adhere to RFC 1035 section 4.2.1, "UDP usage".
// Otherwise, DNS messages transmitted over Conn must adhere
// to RFC 7766 section 5, "Transport Protocol Selection".
// If nil, the default dialer is used.
Dial func(ctx context.Context, network, address string) (Conn, error)
}
func (r *Resolver) LookupAddr(ctx context.Context, addr string) (names []string, err error)
LookupAddr performs a reverse lookup for the given address, returning a list of names mapping to that address.
func (r *Resolver) LookupCNAME(ctx context.Context, host string) (cname string, err error)
LookupCNAME returns the canonical name for the given host. Callers that do not care about the canonical name can call LookupHost or LookupIP directly; both take care of resolving the canonical name as part of the lookup.
A canonical name is the final name after following zero or more CNAME records. LookupCNAME does not return an error if host does not contain DNS "CNAME" records, as long as host resolves to address records.
func (r *Resolver) LookupHost(ctx context.Context, host string) (addrs []string, err error)
LookupHost looks up the given host using the local resolver. It returns a slice of that host's addresses.
func (r *Resolver) LookupIPAddr(ctx context.Context, host string) ([]IPAddr, error)
LookupIPAddr looks up host using the local resolver. It returns a slice of that host's IPv4 and IPv6 addresses.
func (r *Resolver) LookupMX(ctx context.Context, name string) ([]*MX, error)
LookupMX returns the DNS MX records for the given domain name sorted by preference.
func (r *Resolver) LookupNS(ctx context.Context, name string) ([]*NS, error)
LookupNS returns the DNS NS records for the given domain name.
func (r *Resolver) LookupPort(ctx context.Context, network, service string) (port int, err error)
LookupPort looks up the port for the given network and service.
func (r *Resolver) LookupSRV(ctx context.Context, service, proto, name string) (cname string, addrs []*SRV, err error)
LookupSRV tries to resolve an SRV query of the given service, protocol, and domain name. The proto is "tcp" or "udp". The returned records are sorted by priority and randomized by weight within a priority.
LookupSRV constructs the DNS name to look up following RFC 2782. That is, it looks up _service._proto.name. To accommodate services publishing SRV records under non-standard names, if both service and proto are empty strings, LookupSRV looks up name directly.
func (r *Resolver) LookupTXT(ctx context.Context, name string) ([]string, error)
LookupTXT returns the DNS TXT records for the given domain name.
An SRV represents a single DNS SRV record.
type SRV struct {
Target string
Port uint16
Priority uint16
Weight uint16
}
TCPAddr represents the address of a TCP end point.
type TCPAddr struct {
IP IP
Port int
Zone string // IPv6 scoped addressing zone
}
func ResolveTCPAddr(network, address string) (*TCPAddr, error)
ResolveTCPAddr returns an address of TCP end point.
The network must be a TCP network name.
If the host in the address parameter is not a literal IP address or the port is not a literal port number, ResolveTCPAddr resolves the address to an address of TCP end point. Otherwise, it parses the address as a pair of literal IP address and port number. The address parameter can use a host name, but this is not recommended, because it will return at most one of the host name's IP addresses.
See func Dial for a description of the network and address parameters.
func (a *TCPAddr) Network() string
Network returns the address's network name, "tcp".
func (a *TCPAddr) String() string
TCPConn is an implementation of the Conn interface for TCP network connections.
type TCPConn struct {
// contains filtered or unexported fields
}
func DialTCP(network string, laddr, raddr *TCPAddr) (*TCPConn, error)
DialTCP acts like Dial for TCP networks.
The network must be a TCP network name; see func Dial for details.
If laddr is nil, a local address is automatically chosen. If the IP field of raddr is nil or an unspecified IP address, the local system is assumed.
func (c *TCPConn) Close() error
Close closes the connection.
func (c *TCPConn) CloseRead() error
CloseRead shuts down the reading side of the TCP connection. Most callers should just use Close.
func (c *TCPConn) CloseWrite() error
CloseWrite shuts down the writing side of the TCP connection. Most callers should just use Close.
func (c *TCPConn) File() (f *os.File, err error)
File sets the underlying os.File to blocking mode and returns a copy. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.
The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.
On Unix systems this will cause the SetDeadline methods to stop working.
func (c *TCPConn) LocalAddr() Addr
LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.
func (c *TCPConn) Read(b []byte) (int, error)
Read implements the Conn Read method.
func (c *TCPConn) ReadFrom(r io.Reader) (int64, error)
ReadFrom implements the io.ReaderFrom ReadFrom method.
func (c *TCPConn) RemoteAddr() Addr
RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.
func (c *TCPConn) SetDeadline(t time.Time) error
SetDeadline implements the Conn SetDeadline method.
func (c *TCPConn) SetKeepAlive(keepalive bool) error
SetKeepAlive sets whether the operating system should send keepalive messages on the connection.
func (c *TCPConn) SetKeepAlivePeriod(d time.Duration) error
SetKeepAlivePeriod sets period between keep alives.
func (c *TCPConn) SetLinger(sec int) error
SetLinger sets the behavior of Close on a connection which still has data waiting to be sent or to be acknowledged.
If sec < 0 (the default), the operating system finishes sending the data in the background.
If sec == 0, the operating system discards any unsent or unacknowledged data.
If sec > 0, the data is sent in the background as with sec < 0. On some operating systems after sec seconds have elapsed any remaining unsent data may be discarded.
func (c *TCPConn) SetNoDelay(noDelay bool) error
SetNoDelay controls whether the operating system should delay packet transmission in hopes of sending fewer packets (Nagle's algorithm). The default is true (no delay), meaning that data is sent as soon as possible after a Write.
func (c *TCPConn) SetReadBuffer(bytes int) error
SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.
func (c *TCPConn) SetReadDeadline(t time.Time) error
SetReadDeadline implements the Conn SetReadDeadline method.
func (c *TCPConn) SetWriteBuffer(bytes int) error
SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.
func (c *TCPConn) SetWriteDeadline(t time.Time) error
SetWriteDeadline implements the Conn SetWriteDeadline method.
func (c *TCPConn) SyscallConn() (syscall.RawConn, error)
SyscallConn returns a raw network connection. This implements the syscall.Conn interface.
func (c *TCPConn) Write(b []byte) (int, error)
Write implements the Conn Write method.
TCPListener is a TCP network listener. Clients should typically use variables of type Listener instead of assuming TCP.
type TCPListener struct {
// contains filtered or unexported fields
}
func ListenTCP(network string, laddr *TCPAddr) (*TCPListener, error)
ListenTCP acts like Listen for TCP networks.
The network must be a TCP network name; see func Dial for details.
If the IP field of laddr is nil or an unspecified IP address, ListenTCP listens on all available unicast and anycast IP addresses of the local system. If the Port field of laddr is 0, a port number is automatically chosen.
func (l *TCPListener) Accept() (Conn, error)
Accept implements the Accept method in the Listener interface; it waits for the next call and returns a generic Conn.
func (l *TCPListener) AcceptTCP() (*TCPConn, error)
AcceptTCP accepts the next incoming call and returns the new connection.
func (l *TCPListener) Addr() Addr
Addr returns the listener's network address, a *TCPAddr. The Addr returned is shared by all invocations of Addr, so do not modify it.
func (l *TCPListener) Close() error
Close stops listening on the TCP address. Already Accepted connections are not closed.
func (l *TCPListener) File() (f *os.File, err error)
File returns a copy of the underlying os.File, set to blocking mode. It is the caller's responsibility to close f when finished. Closing l does not affect f, and closing f does not affect l.
The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.
func (l *TCPListener) SetDeadline(t time.Time) error
SetDeadline sets the deadline associated with the listener. A zero time value disables the deadline.
func (l *TCPListener) SyscallConn() (syscall.RawConn, error)
SyscallConn returns a raw network connection. This implements the syscall.Conn interface.
The returned RawConn only supports calling Control. Read and Write return an error.
UDPAddr represents the address of a UDP end point.
type UDPAddr struct {
IP IP
Port int
Zone string // IPv6 scoped addressing zone
}
func ResolveUDPAddr(network, address string) (*UDPAddr, error)
ResolveUDPAddr returns an address of UDP end point.
The network must be a UDP network name.
If the host in the address parameter is not a literal IP address or the port is not a literal port number, ResolveUDPAddr resolves the address to an address of UDP end point. Otherwise, it parses the address as a pair of literal IP address and port number. The address parameter can use a host name, but this is not recommended, because it will return at most one of the host name's IP addresses.
See func Dial for a description of the network and address parameters.
func (a *UDPAddr) Network() string
Network returns the address's network name, "udp".
func (a *UDPAddr) String() string
UDPConn is the implementation of the Conn and PacketConn interfaces for UDP network connections.
type UDPConn struct {
// contains filtered or unexported fields
}
func DialUDP(network string, laddr, raddr *UDPAddr) (*UDPConn, error)
DialUDP acts like Dial for UDP networks.
The network must be a UDP network name; see func Dial for details.
If laddr is nil, a local address is automatically chosen. If the IP field of raddr is nil or an unspecified IP address, the local system is assumed.
func ListenMulticastUDP(network string, ifi *Interface, gaddr *UDPAddr) (*UDPConn, error)
ListenMulticastUDP acts like ListenPacket for UDP networks but takes a group address on a specific network interface.
The network must be a UDP network name; see func Dial for details.
ListenMulticastUDP listens on all available IP addresses of the local system including the group, multicast IP address. If ifi is nil, ListenMulticastUDP uses the system-assigned multicast interface, although this is not recommended because the assignment depends on platforms and sometimes it might require routing configuration. If the Port field of gaddr is 0, a port number is automatically chosen.
ListenMulticastUDP is just for convenience of simple, small applications. There are golang.org/x/net/ipv4 and golang.org/x/net/ipv6 packages for general purpose uses.
func ListenUDP(network string, laddr *UDPAddr) (*UDPConn, error)
ListenUDP acts like ListenPacket for UDP networks.
The network must be a UDP network name; see func Dial for details.
If the IP field of laddr is nil or an unspecified IP address, ListenUDP listens on all available IP addresses of the local system except multicast IP addresses. If the Port field of laddr is 0, a port number is automatically chosen.
func (c *UDPConn) Close() error
Close closes the connection.
func (c *UDPConn) File() (f *os.File, err error)
File sets the underlying os.File to blocking mode and returns a copy. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.
The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.
On Unix systems this will cause the SetDeadline methods to stop working.
func (c *UDPConn) LocalAddr() Addr
LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.
func (c *UDPConn) Read(b []byte) (int, error)
Read implements the Conn Read method.
func (c *UDPConn) ReadFrom(b []byte) (int, Addr, error)
ReadFrom implements the PacketConn ReadFrom method.
func (c *UDPConn) ReadFromUDP(b []byte) (int, *UDPAddr, error)
ReadFromUDP acts like ReadFrom but returns a UDPAddr.
func (c *UDPConn) ReadMsgUDP(b, oob []byte) (n, oobn, flags int, addr *UDPAddr, err error)
ReadMsgUDP reads a message from c, copying the payload into b and the associated out-of-band data into oob. It returns the number of bytes copied into b, the number of bytes copied into oob, the flags that were set on the message and the source address of the message.
The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.
func (c *UDPConn) RemoteAddr() Addr
RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.
func (c *UDPConn) SetDeadline(t time.Time) error
SetDeadline implements the Conn SetDeadline method.
func (c *UDPConn) SetReadBuffer(bytes int) error
SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.
func (c *UDPConn) SetReadDeadline(t time.Time) error
SetReadDeadline implements the Conn SetReadDeadline method.
func (c *UDPConn) SetWriteBuffer(bytes int) error
SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.
func (c *UDPConn) SetWriteDeadline(t time.Time) error
SetWriteDeadline implements the Conn SetWriteDeadline method.
func (c *UDPConn) SyscallConn() (syscall.RawConn, error)
SyscallConn returns a raw network connection. This implements the syscall.Conn interface.
func (c *UDPConn) Write(b []byte) (int, error)
Write implements the Conn Write method.
func (c *UDPConn) WriteMsgUDP(b, oob []byte, addr *UDPAddr) (n, oobn int, err error)
WriteMsgUDP writes a message to addr via c if c isn't connected, or to c's remote address if c is connected (in which case addr must be nil). The payload is copied from b and the associated out-of-band data is copied from oob. It returns the number of payload and out-of-band bytes written.
The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.
func (c *UDPConn) WriteTo(b []byte, addr Addr) (int, error)
WriteTo implements the PacketConn WriteTo method.
func (c *UDPConn) WriteToUDP(b []byte, addr *UDPAddr) (int, error)
WriteToUDP acts like WriteTo but takes a UDPAddr.
UnixAddr represents the address of a Unix domain socket end point.
type UnixAddr struct {
Name string
Net string
}
func ResolveUnixAddr(network, address string) (*UnixAddr, error)
ResolveUnixAddr returns an address of Unix domain socket end point.
The network must be a Unix network name.
See func Dial for a description of the network and address parameters.
func (a *UnixAddr) Network() string
Network returns the address's network name, "unix", "unixgram" or "unixpacket".
func (a *UnixAddr) String() string
UnixConn is an implementation of the Conn interface for connections to Unix domain sockets.
type UnixConn struct {
// contains filtered or unexported fields
}
func DialUnix(network string, laddr, raddr *UnixAddr) (*UnixConn, error)
DialUnix acts like Dial for Unix networks.
The network must be a Unix network name; see func Dial for details.
If laddr is non-nil, it is used as the local address for the connection.
func ListenUnixgram(network string, laddr *UnixAddr) (*UnixConn, error)
ListenUnixgram acts like ListenPacket for Unix networks.
The network must be "unixgram".
func (c *UnixConn) Close() error
Close closes the connection.
func (c *UnixConn) CloseRead() error
CloseRead shuts down the reading side of the Unix domain connection. Most callers should just use Close.
func (c *UnixConn) CloseWrite() error
CloseWrite shuts down the writing side of the Unix domain connection. Most callers should just use Close.
func (c *UnixConn) File() (f *os.File, err error)
File sets the underlying os.File to blocking mode and returns a copy. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.
The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.
On Unix systems this will cause the SetDeadline methods to stop working.
func (c *UnixConn) LocalAddr() Addr
LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.
func (c *UnixConn) Read(b []byte) (int, error)
Read implements the Conn Read method.
func (c *UnixConn) ReadFrom(b []byte) (int, Addr, error)
ReadFrom implements the PacketConn ReadFrom method.
func (c *UnixConn) ReadFromUnix(b []byte) (int, *UnixAddr, error)
ReadFromUnix acts like ReadFrom but returns a UnixAddr.
func (c *UnixConn) ReadMsgUnix(b, oob []byte) (n, oobn, flags int, addr *UnixAddr, err error)
ReadMsgUnix reads a message from c, copying the payload into b and the associated out-of-band data into oob. It returns the number of bytes copied into b, the number of bytes copied into oob, the flags that were set on the message and the source address of the message.
Note that if len(b) == 0 and len(oob) > 0, this function will still read (and discard) 1 byte from the connection.
func (c *UnixConn) RemoteAddr() Addr
RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.
func (c *UnixConn) SetDeadline(t time.Time) error
SetDeadline implements the Conn SetDeadline method.
func (c *UnixConn) SetReadBuffer(bytes int) error
SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.
func (c *UnixConn) SetReadDeadline(t time.Time) error
SetReadDeadline implements the Conn SetReadDeadline method.
func (c *UnixConn) SetWriteBuffer(bytes int) error
SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.
func (c *UnixConn) SetWriteDeadline(t time.Time) error
SetWriteDeadline implements the Conn SetWriteDeadline method.
func (c *UnixConn) SyscallConn() (syscall.RawConn, error)
SyscallConn returns a raw network connection. This implements the syscall.Conn interface.
func (c *UnixConn) Write(b []byte) (int, error)
Write implements the Conn Write method.
func (c *UnixConn) WriteMsgUnix(b, oob []byte, addr *UnixAddr) (n, oobn int, err error)
WriteMsgUnix writes a message to addr via c, copying the payload from b and the associated out-of-band data from oob. It returns the number of payload and out-of-band bytes written.
Note that if len(b) == 0 and len(oob) > 0, this function will still write 1 byte to the connection.
func (c *UnixConn) WriteTo(b []byte, addr Addr) (int, error)
WriteTo implements the PacketConn WriteTo method.
func (c *UnixConn) WriteToUnix(b []byte, addr *UnixAddr) (int, error)
WriteToUnix acts like WriteTo but takes a UnixAddr.
UnixListener is a Unix domain socket listener. Clients should typically use variables of type Listener instead of assuming Unix domain sockets.
type UnixListener struct {
// contains filtered or unexported fields
}
func ListenUnix(network string, laddr *UnixAddr) (*UnixListener, error)
ListenUnix acts like Listen for Unix networks.
The network must be "unix" or "unixpacket".
func (l *UnixListener) Accept() (Conn, error)
Accept implements the Accept method in the Listener interface. Returned connections will be of type *UnixConn.
func (l *UnixListener) AcceptUnix() (*UnixConn, error)
AcceptUnix accepts the next incoming call and returns the new connection.
func (l *UnixListener) Addr() Addr
Addr returns the listener's network address. The Addr returned is shared by all invocations of Addr, so do not modify it.
func (l *UnixListener) Close() error
Close stops listening on the Unix address. Already accepted connections are not closed.
func (l *UnixListener) File() (f *os.File, err error)
File returns a copy of the underlying os.File, set to blocking mode. It is the caller's responsibility to close f when finished. Closing l does not affect f, and closing f does not affect l.
The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.
func (l *UnixListener) SetDeadline(t time.Time) error
SetDeadline sets the deadline associated with the listener. A zero time value disables the deadline.
func (l *UnixListener) SetUnlinkOnClose(unlink bool)
SetUnlinkOnClose sets whether the underlying socket file should be removed from the file system when the listener is closed.
The default behavior is to unlink the socket file only when package net created it. That is, when the listener and the underlying socket file were created by a call to Listen or ListenUnix, then by default closing the listener will remove the socket file. but if the listener was created by a call to FileListener to use an already existing socket file, then by default closing the listener will not remove the socket file.
func (l *UnixListener) SyscallConn() (syscall.RawConn, error)
SyscallConn returns a raw network connection. This implements the syscall.Conn interface.
The returned RawConn only supports calling Control. Read and Write return an error.
type UnknownNetworkError string
func (e UnknownNetworkError) Error() string
func (e UnknownNetworkError) Temporary() bool
func (e UnknownNetworkError) Timeout() bool
On NaCl and Windows, the FileConn, FileListener and FilePacketConn functions are not implemented.
On NaCl, methods and functions related to Interface are not implemented.
On DragonFly BSD, NetBSD, OpenBSD, Plan 9 and Solaris, the MulticastAddrs method of Interface is not implemented.
On every POSIX platform, reads from the "ip4" network using the ReadFrom or ReadFromIP method might not return a complete IPv4 packet, including its header, even if there is space available. This can occur even in cases where Read or ReadMsgIP could return a complete packet. For this reason, it is recommended that you do not use these methods if it is important to receive a full packet.
The Go 1 compatibility guidelines make it impossible for us to change the behavior of these methods; use Read or ReadMsgIP instead.
On NaCl and Plan 9, the ReadMsgIP and WriteMsgIP methods of IPConn are not implemented.
On Windows, the File method of IPConn is not implemented.
On DragonFly BSD and OpenBSD, listening on the "tcp" and "udp" networks does not listen for both IPv4 and IPv6 connections. This is due to the fact that IPv4 traffic will not be routed to an IPv6 socket - two separate sockets are required if both address families are to be supported. See inet6(4) for details.
On Windows, the Read and Write methods of syscall.RawConn are not implemented.
On NaCl and Plan 9, the Control, Read and Write methods of syscall.RawConn are not implemented.
On Windows, the File method of TCPListener is not implemented.
On NaCl and Plan 9, the ReadMsgUDP and WriteMsgUDP methods of UDPConn are not implemented.
On Windows, the File method of UDPConn is not implemented.
On NaCl, the ListenMulticastUDP function is not implemented.
| Name | Synopsis |
|---|---|
| .. | |
| http | Package http provides HTTP client and server implementations. |
| cgi | Package cgi implements CGI (Common Gateway Interface) as specified in RFC 3875. |
| cookiejar | Package cookiejar implements an in-memory RFC 6265-compliant http.CookieJar. |
| fcgi | Package fcgi implements the FastCGI protocol. |
| httptest | Package httptest provides utilities for HTTP testing. |
| httptrace | Package httptrace provides mechanisms to trace the events within HTTP client requests. |
| httputil | Package httputil provides HTTP utility functions, complementing the more common ones in the net/http package. |
| pprof | Package pprof serves via its HTTP server runtime profiling data in the format expected by the pprof visualization tool. |
| Package mail implements parsing of mail messages. | |
| rpc | Package rpc provides access to the exported methods of an object across a network or other I/O connection. |
| jsonrpc | Package jsonrpc implements a JSON-RPC 1.0 ClientCodec and ServerCodec for the rpc package. |
| smtp | Package smtp implements the Simple Mail Transfer Protocol as defined in RFC 5321. |
| textproto | Package textproto implements generic support for text-based request/response protocols in the style of HTTP, NNTP, and SMTP. |
| url | Package url parses URLs and implements query escaping. |