Table of Contents Previous Next
Logo
Client-Side Slice-to-C++ Mapping : 6.15 Asynchronous Method Invocation (AMI)
Copyright © 2003-2010 ZeroC, Inc.

6.15 Asynchronous Method Invocation (AMI)

Note: As of version 3.4, Ice provides a new API for asynchronous method invocation. This section describes this API. You can find documentation for the previous API in Appendix K. Note that the old API is deprecated and will be removed in a future release.
Asynchronous Method Invocation (AMI) is the term used to describe the client-side support for the asynchronous programming model. AMI supports both oneway and twoway requests, but unlike their synchronous counterparts, AMI requests never block the calling thread. When a client issues an AMI request, the Ice run time hands the message off to the local transport buffer or, if the buffer is currently full, queues the request for later delivery. The application can then continue its activities and poll or wait for completion of the invocation, or receive a callback when the invocation completes.
AMI is transparent to the server: there is no way for the server to tell whether a client sent a request synchronously or asynchronously.

6.15.1 Basic Asynchronous API

Consider the following simple Slice definition:
module Demo { 
    interface Employees {
        string getName(int number);
    };
};

Proxy Methods

Besides the synchronous proxy methods, slice2cpp generates the following asynchronous proxy methods:1
Ice::AsyncResultPtr begin_getName(Ice::Int number);
Ice::AsyncResultPtr begin_getName(Ice::Int number,
                                  const Ice::Context& __ctx)

std::string end_getName(const Ice::AsyncResultPtr&);
As you can see, the single getName operation results in begin_getName and end_getName methods. (The begin_ method is overloaded so you can pass a per-invocation context—see Section 32.12.)
• The begin_getName method sends (or queues) an invocation of getName. This method does not block the calling thread.
• The end_getName method collects the result of the asynchronous invoca­tion. If, at the time the calling thread calls end_getName, the result is not yet available, the calling thread blocks until the invocation completes. Other­wise, if the invocation completed some time before the call to end_getName, the method returns immediately with the result.
A client could call these methods as follows:
EmployeesPrx e = ...;
Ice::AsyncResultPtr r = e>begin_getName(99);

// Continue to do other things here...

string name = e>end_getName(r);
Because begin_getName does not block, the calling thread can do other things while the operation is in progress.
Note that begin_getName returns a value of type AsyncResultPtr. The AsyncResult associated with this smart pointer contains the state that the Ice run time requires to keep track of the asynchronous invocation. You must pass the AsyncResultPtr that is returned by the begin_ method to the corre­sponding end_ method.
The begin_ method has one parameter for each in-parameter of the corre­sponding Slice operation. Similarly, the end_ method has one out-parameter for each out-parameter of the corresponding Slice operation (plus the AsyncResultPtr parameter). For example, consider the following operation:
double op(int inp1, string inp2, out bool outp1, out long outp2);
The begin_op and end_op methods have the following signature:
Ice::AsyncResultPtr begin_op(Ice::Int inp1,
                             const ::std::string& inp2)

Ice::Double end_op(bool& outp1, Ice::Long& outp2,
                   const Ice::AsyncResultPtr&);

Exception Handling

If an invocation raises an exception, the exception is thrown by the end_ method, even if the actual error condition for the exception was encountered during the begin_ method (“on the way out”). The advantage of this behavior is that all exception handling is located with the code that calls the end_ method (instead of being present twice, once where the begin_ method is called, and again where the end_ method is called).
There is one exception to the above rule: if you destroy the communicator and then make an asynchronous invocation, the begin_ method throws Communi­catorDestroyedException. This is necessary because, once the run time is finalized, it can no longer throw an exception from the end_ method.
The only other exception that is thrown by the begin_ and end_ methods is IceUtil::IllegalArgumentException. This exception indicates that you have used the API incorrectly. For example, the begin_ method throws this exception if you call an operation that has a return value or out-parameters on a oneway proxy. Similarly, the end_ method throws this exception if you use a different proxy to call the end_ method than the proxy you used to call the begin_ method, or if the AsyncResult you pass to the end_ method was obtained by calling the begin_ method for a different operation.

6.15.2 The AsyncResult Class

The AsyncResult that is returned by the begin_ method encapsulates the state of the asynchronous invocation:
class AsyncResult
    : virtual public IceUtil::Shared,
      private IceUtil::noncopyable {
public:
    virtual bool operator==(const AsyncResult&) const;
    virtual bool operator<(const AsyncResult&) const;

    virtual Int getHash() const;

    virtual CommunicatorPtr getCommunicator() const;
    virtual ConnectionPtr getConnection() const;
    virtual ObjectPrx getProxy() const;
    const string& getOperation();
    LocalObjectPtr getCookie() const;

    bool isCompleted() const;
    void waitForCompleted();

    bool isSent() const;
    void waitForSent();

    bool sentSynchronously() const;

};
The methods have the following semantics:
• bool operator==(const AsyncResult&) const
bool operator<(const AsyncResult&) const
Int getHash() const
These methods allow you to create ordered or hashed collections of pending asynchronous invocations. This is useful, for example, if you can have a number of outstanding requests, and need to pass state between the begin_ and the end_ methods. In this case, you can use the returned AsyncRe­sults as the key into a map that stores the state for each call.
• CommunicatorPtr getCommunicator() const
This method returns the communicator that sent the invocation.
• virtual ConnectionPtr getConnection() const
This method returns the connection that was used for the invocation.
• virtual ObjectPrx getProxy() const
This method returns the proxy that was used to call the begin_ method.
• const string& getOperation() const
This method returns the name of the operation.
• LocalObjectPtr getCookie() const
This method returns the cookie that was passed to the begin_ method (see Section 6.15.4). If you did not pass a cookie to the begin_ method, the return value is null.
• bool isCompleted() const
This method returns true if, at the time it is called, the result of an invocation is available, indicating that a call to the end_ method will not block the caller. Otherwise, if the result is not yet available, the method returns false.
• void waitForCompleted()
This method blocks the caller until the result of an invocation becomes avail­able.
• bool isSent() const
When you call the begin_ method, the Ice run time attempts to write the corresponding request to the client-side transport. If the transport cannot accept the request, the Ice run time queues the request for later transmission. isSent returns true if, at the time it is called, the request has been written to the local transport (whether it was initially queued or not). Otherwise, if the request is still queued, isSent returns false.
• void waitForSent()
This method blocks the calling thread until a request has been written to the client-side transport.
• bool sentSynchronously() const
This method returns true if a request was written to the client-side transport without first being queued. If the request was initially queued, sentSynchronously returns false (independent of whether the request is still in the queue or has since been written to the client-side transport).

6.15.3 Polling for Completion

The AsyncResult methods allow you to poll for call completion. Polling is useful in a variety of cases. As an example, consider the following simple interface to transfer files from client to server:
interface FileTransfer
{
    void send(int offset, ByteSeq bytes);
};
The client repeatedly calls send to send a chunk of the file, indicating at which offset in the file the chunk belongs. A naïve way to transmit a file would be along the following lines:
FileHandle file = open(...);
FileTransferPrx ft = ...;
const int chunkSize = ...;

Ice::Int offset = 0;
while (!file.eof()) {
    ByteSeq bs;
    bs = file.read(chunkSize); // Read a chunk
    ft>send(offset, bs);      // Send the chunk
    offset += bs.size();
}
This works, but not very well: because the client makes synchronous calls, it writes each chunk on the wire and then waits for the server to receive the data, process it, and return a reply before writing the next chunk. This means that both client and server spend much of their time doing nothing—the client does nothing while the server processes the data, and the server does nothing while it waits for the client to send the next chunk.
Using asynchronous calls, we can improve on this considerably:
FileHandle file = open(...);
FileTransferPrx ft = ...;
const int chunkSize = ...;
Ice::Int offset = 0;

list<Ice::AsyncResultPtr> results;
const int numRequests = 5;

while (!file.eof()) {
    ByteSeq bs;
    bs = file.read(chunkSize);

    // Send up to numRequests + 1 chunks asynchronously.
    Ice::AsyncResultPtr r = ft>begin_send(offset, bs);
    offset += bs.size();

    // Wait until this request has been passed to the transport.
    r>waitForSent();
    results.push_back(r);

    // Once there are more than numRequests, wait for the least
    // recent one to complete.
    while (results.size() > numRequests) {
        Ice::AsyncResultPtr r = results.front();
        results.pop_front();
        r>waitForCompleted();
    }
}

// Wait for any remaining requests to complete.
while (!results.empty()) {
    Ice::AsyncResultPtr r = results.front();
    results.pop_front();
    r>waitForCompleted();
}
With this code, the client sends up to numRequests + 1 chunks before it waits for the least recent one of these requests to complete. In other words, the client sends the next request without waiting for the preceding request to complete, up to the limit set by numRequests. In effect, this allows the client to “keep the pipe to the server full of data”: the client keeps sending data, so both client and server continuously do work.
Obviously, the correct chunk size and value of numRequests depend on the bandwidth of the network as well as the amount of time taken by the server to process each request. However, with a little testing, you can quickly zoom in on the point where making the requests larger or queuing more requests no longer improves performance. With this technique, you can realize the full bandwidth of the link to within a percent or two of the theoretical bandwidth limit of a native socket connection.

6.15.4 Generic Completion Callbacks

The begin_ method is overloaded to allow you to provide completion callbacks. Here are the corresponding methods for the getName operation:
Ice::AsyncResultPtr begin_getName(
                        Ice::Int number,
                        const Ice::CallbackPtr& __del,
                        const Ice::LocalObjectPtr& __cookie = 0);

Ice::AsyncResultPtr begin_getName(
                        Ice::Int number,
                        const Ice::Context& __ctx,
                        const Ice::CallbackPtr& __del,
                        const Ice::LocalObjectPtr& __cookie = 0);
The second version of begin_getName lets you override the default context. (We discuss the purpose of the cookie parameter in the next section.) Following the in-parameters, the begin_ method accepts a parameter of type Ice::CallbackPtr. This is a smart pointer to a callback class that is provided by the Ice run time. This class stores an instance of a callback class that you implement. The Ice run time invokes a method on your callback instance when an asynchronous operation completes. Your callback class must provide a method that returns void and accepts a single parameter of type const AsyncResultPtr&, for example:
class MyCallback : public IceUtil::Shared {
public:
    void finished(const Ice::AsyncResultPtr& r) {
        EmployeesPrx e =
            EmployeesPrx::uncheckedCast(r>getProxy());
        try {
            string name = e>end_getName(r);
            cout << "Name is: " << name << endl;
        } catch (const Ice::Exception& ex) {
            cerr << "Exception is: " << ex << endl;
        }
    }
};
typedef IceUtil::Handle<MyCallback> MyCallbackPtr;
Note that your callback class must derive from IceUtil::Shared. The call­back method can have any name you prefer but its signature must match the preceding example.
The implementation of your callback method must call the end_ method. The proxy for the call is available via the getProxy method on the AsyncResult that is passed by the Ice run time. The return type of getProxy is Ice::ObjectPrx, so you must down-cast the proxy to its correct type. (You should always use an uncheckedCast to do this, otherwise you send an addi­tional message to the server to verify the proxy type.)
Your callback method should catch and handle any exceptions that may be thrown by the end_ method. If you allow an exception to escape from the call­back method, the Ice run time produces a log entry by default and ignores the exception. (You can disable the log message by setting the property Ice.Warn.AMICallback to zero.)
To inform the Ice run time that you want to receive a callback for the comple­tion of the asynchronous call, you pass the callback instance to the begin_ method:
EmployeesPrx e = ...;

MyCallbackPtr cb = new MyCallback;
Ice::CallbackPtr d = Ice::newCallback(cb, &MyCallback::finished);

e>begin_getName(99, d); 
Note the call to Ice::newCallback in this example. This helper function expects a smart pointer to your callback instance and a member function pointer that specifies your callback method.

Using Cookies

It is common for the end_ method to require access to some state that is estab­lished by the code that calls the begin_ method. As an example, consider an application that asynchronously starts a number of operations and, as each opera­tion completes, needs to update different user interface elements with the results. In this case, the begin_ method knows which user interface element should receive the update, and the end_ method needs access to that element.
The API allows you to pass such state by providing a cookie. A cookie is an instance of a class that you write; the class can contain whatever data you want to pass, as well as any methods you may want to add to manipulate that data.
The only requirement on the cookie class is that it must derive from Ice::LocalObject. Here is an example implementation that stores a WidgetHandle. (We assume that this class provides whatever methods are needed by the end_ method to update the display.)
class Cookie : public Ice::LocalObject
{
public:
    Cookie(WidgetHandle h) : _h(h) {}
    WidgetHandle getWidget() { return _h; }

private:
    WidgetHandle _h;
};
typedef IceUtil::Handle<Cookie> CookiePtr;
When you call the begin_ method, you pass the appropriate cookie instance to inform the end_ method how to update the display:
// Make cookie for call to getName(99).
CookiePtr cookie1 = new Cookie(widgetHandle1);

// Make cookie for call to getName(42);
CookiePtr cookie2 = new Cookie(widgetHandle2);

// Invoke the getName operation with different cookies.
e>begin_getName(99, getNameCB, cookie1);
e>begin_getName(24, getNameCB, cookie2);
The end_ method can retrieve the cookie from the AsyncResult by calling getCookie. For this example, we assume that widgets have a writeString method that updates the relevant UI element:
void
MyCallback::getName(const Ice::AsyncResultPtr& r)
{
    EmployeesPrx e = EmployeesPrx::uncheckedCast(r>getProxy());
    CookiePtr cookie = CookiePtr::dynamicCast(r>getCookie());
    try {
        string name = e>end_getName(r);
        cookie>getWidget()>writeString(name);
    } catch (const Ice::Exception& ex) {
        handleException(ex);
    }
}
The cookie provides a simple and effective way for you to pass state between the point where an operation is invoked and the point where its results are processed. Moreover, if you have a number of operations that share common state, you can pass the same cookie instance to multiple invocations.

6.15.5 Type-Safe Completion Callbacks

The generic callback API we saw in Section 6.15.4 is not entirely type-safe:
• You must down-cast the return value of getProxy to the correct proxy type before you can call the end_ method.
• You must call the correct end_ method to match the operation called by the begin_ method.
• If you use a cookie, you must down-cast the cookie to the correct type before you can access the data inside the cookie.
• You must remember to catch exceptions when you call the end_ method; if you forget to do this, you will not know that the operation failed.
slice2cpp generates an additional type-safe API that takes care of these chores for you. The type-safe API is provided as a template that works much like the Ice::Callback class of the generic API, but requires strongly-typed method signatures.
To use type-safe callbacks, you must implement a callback class that provides two callback methods:
• a success callback that is called if the operation succeeds
• a failure callback that is called if the operation raises an exception
As for the generic API, your callback class must derive from IceUtil::Shared. Here is a callback class for an invocation of the getName operation:
class MyCallback : public IceUtil::Shared
{
public:
    void getNameCB(const string& name) {
        cout << "Name is: " << name << endl;
    }

    void failureCB(const Ice::Exception& ex) {
        cerr << "Exception is: << ex << endl;
    }
};
The callback methods can have any name you prefer and must have void return type. The failure callback always has a single parameter of type const Ice::Exception&. The success callback parameters depend on the operation signature. If the operation has non-void return type, the first parameter of the success callback is the return value. The return value (if any) is followed by a parameter for each out-parameter of the corresponding Slice operation, in the order of declaration.
To receive these callbacks, you instantiate your callback instance and specify the methods you have defined before passing a smart pointer to a callback wrapper instance to the begin_ method:
MyCallbackPtr cb = new MyCallback;

Callback_Employees_getNamePtr getNameCB =
    newCallback_Employees_getName(
        cb, &MyCallback::getNameCB, &MyCallback::failureCB);

Callback_Employees_getNumberPtr getNumberCB =
    newCallback_Employees_getNumber(
        cb, &MyCallback::getNumberCB, &MyCallback::failureCB);

e>begin_getName(99, getNameCB);
e>begin_getNumber("Fred", getNumberCB);
Note how this code creates two instances of type Callback_Employees_getNamePtr. This smart pointer is generated by slice2cpp; it points to a template instance that encapsulates your callback instance and two member function pointers for the callback methods. The name of this pointer is
<module>::Callback_<interface>_<operation>Ptr.
Also note that the code uses helper functions to initialize the smart pointers. The first argument to the helper function is your callback instance, and the two following arguments are the success and failure member function pointers, respec­tively. The name of the helper function is <module>::newCallback_<interface>_<operation>.
It is legal to pass a null pointer as the success or failure callback. For the success callback, this is legal only for operations that have void return type and no out-parameters. This is useful if you do not care when the operation completes but want to know if the call failed. If you pass a null exception callback, the Ice run time will ignore any exception that is raised by the invocation.
The type of the success and exception member function pointers is provided as Response and Exception typedefs by the callback template. For example, you can ignore exceptions for an invocation of getName as follows:
Callback_Employees_op::Exception nullException = 0;

MyCallbackPtr cb = new MyCallback;

Callback_Employees_getNamePtr getNameCB =
    newCallback_Employees_getName(
        cb, &MyCallback::getNameCB, nullException);

e>begin_getName(99, getNameCB); // Ignores exceptions

Using Cookies

The begin_ method optionally accepts a cookie as a trailing parameter. As for the generic API, you can use the cookie to share state between the begin_ and end_ methods. However, with the type-safe API, there is no need to down-cast the cookie. Instead, the cookie parameter that is passed to the end_ method is strongly typed. Assuming that you have defined a Cookie class and CookiePtr smart pointer, you can pass a cookie to the begin_ method as follows:
MyCallbackPtr cb = new MyCallback;

Callback_Employees_getNamePtr getNameCB =
    newCallback_Employees_getName(
        cb, &MyCallback::getNameCB, &MyCallback::failureCB);

CookiePtr cookie = new Cookie(widgetHandle);
e>begin_getName(99, getNameCB, cookie);
The callback methods of your callback class simply add the cookie parameter:
class MyCallback : public IceUtil::Shared
{
public:
    void getNameCB(const string& name, const CookiePtr& cookie) {
        cookie>getWidget()>writeString(name);
    }

    void failureCB(const Ice::Exception& ex,
                   const CookiePtr& cookie) {
        cookie>getWidget()>writeError(ex.what());
    }
};

6.15.6 Oneway Invocations

You can invoke operations via oneway proxies asynchronously, provided the oper­ation has void return type, does not have any out-parameters, and does not raise user exceptions. If you call the begin_ method on a oneway proxy for an opera­tion that returns values or raises a user exception, the begin_ method throws an IceUtil::IllegalArgumentException.
For the generic API, the callback method looks exactly as for a twoway invo­cation. However, for oneway invocations, the Ice run time does not call the call­back method unless the invocation raised an exception during the begin_ method (“on the way out”).
For the type-safe API, the newCallback helper for void operations is over­loaded so you can omit the success callback. For example, here is how you could call ice_ping asynchronously:
MyCallbackPtr cb = new MyCallback;

Ice::Callback_Object_ice_pingPtr callback =
    Ice::newCallback_Object_ice_ping(cb, &MyCallback::failureCB);

p>begin_opVoid(callback);

6.15.7 Flow Control

Asynchronous method invocations never block the thread that calls the begin_ method: the Ice run time checks to see whether it can write the request to the local transport. If it can, it does so immediately in the caller’s thread. (In that case, AsyncResult::sentSynchronously returns true.) Alternatively, if the local transport does not have sufficient buffer space to accept the request, the Ice run time queues the request internally for later transmission in the background. (In that case, AsyncResult::sentSynchronously returns false.)
This creates a potential problem: if a client sends many asynchronous requests at the time the server is too busy to keep up with them, the requests pile up in the client-side run time until, eventually, the client runs out of memory.
The API provides a way for you to implement flow control by counting the number of requests that are queued so, if that number exceeds some threshold, the client stops invoking more operations until some of the queued operations have drained out of the local transport.
For the generic API, you can create an additional callback method:
class MyCallback : public IceUtil::Shared {
public:
    void finished(const Ice::AsyncResultPtr&);
    void sent(const Ice::AsyncResultPtr&);
};
typedef IceUtil::Handle<MyCallback> MyCallbackPtr;
As with any other callback method, you are free to choose any name you like. For this example, the name of the callback method is sent. You inform the Ice run time that you want to be informed when a call has been passed to the local trans­port by specifying the sent method as an additional parameter when you create the Ice::Callback:
EmployeesPrx e = ...;

MyCallbackPtr cb = new MyCallback;
Ice::CallbackPtr d = Ice::newCallback(cb,
                                      &MyCallback::finished,
                                      &MyCallback::sent);

e>begin_getName(99, d); 
If the Ice run time can immediately pass the request to the local transport, it does so and invokes the sent method from the thread that calls the begin_ method. On the other hand, if the run time has to queue the request, it calls the sent method from a different thread once it has written the request to the local trans­port. In addition, you can find out from the AsyncResult that is returned by the begin_ method whether the request was sent synchronously or was queued, by calling sentSynchronously.
For the generic API, the sent method has the following signature:
void sent(const Ice::AsyncResult&);
For the type-safe API, there are two versions, one without and one with a cookie:
void sent(bool sentSynchronously);
void sent(bool sentSynchronously, const <CookiePtr>& cookie);
For the version with a cookie, <CookiePtr> is replaced with the actual type of the cookie smart pointer you passed to the begin_ method.
The sent methods allow you to limit the number of queued requests by counting the number of requests that are queued and decrementing the count when the Ice run time passes a request to the local transport.

6.15.8 Batch Requests

Applications that send batched requests (see Section 32.16) can either flush a batch explicitly or allow the Ice run time to flush automatically. The proxy method ice_flushBatchRequests performs an immediate flush using the synchronous invocation model and may block the calling thread until the entire message can be sent. Ice also provides asynchronous versions of this method so you can flush batch requests asynchronously.
begin_ice_flushBatchRequests and end_ice_flushBatchRequests are proxy methods that flush any batch requests queued by that proxy.
In addition, similar methods are available on the communicator and the Connection object that is returned by AsyncResult::getConnection. These methods flush batch requests sent via the same communicator and via the same connection, respectively.

6.15.9 Concurrency

The Ice run time always invokes your callback methods from a separate thread. This means that you can safely use a non-recursive mutex without risking dead­lock. There is one exception to this rule: the run time calls the sent callback from the thread calling the begin_ method if the request could be sent synchro­nously. In the sent callback, you know which thread is calling the callback by looking at the sentSynchronously member or parameter, so you can take appropriate action to avoid a self-deadlock.

6.15.10 Limitations

AMI invocations cannot be sent using collocated optimization. If you attempt to invoke an AMI operation using a proxy that is configured to use collocation opti­mization, the Ice run time raises CollocationOptimizationException if the servant happens to be collocated; the request is sent normally if the servant is not collocated. Section 32.21 provides more information about this optimization and describes how to disable it when necessary.

1
There are four additional overloads of begin_getName that we discuss in Sections 6.15.4 and 6.15.5.


Table of Contents Previous Next
Logo