In this chapter, we go through three examples to illustrate the
practical steps to use omniORB. By going through the source code of
each example, the essential concepts and APIs are introduced. If you
have no previous experience with using CORBA, you should study this
chapter in detail. There are pointers to other essential documents you
should be familiar with.
If you have experience with using other ORBs, you should still go
through this chapter because it provides important information about
the features and APIs that are necessarily omniORB specific. With the
Portable Object Adapter, there are very few omniORB specific details.
2.1 The Echo Object Example
Our example is an object which has only one method. The method simply
echos the argument string. We have to:
- define the object interface in IDL;
- use the IDL compiler to generate the stub code1;
- provide the servant object implementation;
- write the client code.
These examples are in the src/examples/echo directory of the
omniORB distribution; there are several other examples one directory
above that in src/examples.
2.2 Specifying the Echo interface in IDL
We define an object interface, called Echo, as follows:
interface Echo {
string echoString(in string mesg);
};
If you are new to IDL, you can learn about its syntax in Chapter 3 of
the CORBA 2.6 specification [OMG01]. For the moment, you
only need to know that the interface consists of a single operation,
echoString(), which takes a string as an input argument and returns
a copy of the same string.
The interface is written in a file, called echo.idl. It is part
of the CORBA standard that all IDL files should have the extension
`.idl', although omniORB does not enforce this.
For simplicity, the interface is defined in the global IDL namespace.
You should avoid this practice for the sake of object reusability. If
every CORBA developer defines their interfaces in the global IDL
namespace, there is a danger of name clashes between two independently
defined interfaces. Therefore, it is better to qualify your interfaces
by defining them inside module names. Of course, this does not
eliminate the chance of a name clash unless some form of naming
convention is agreed globally. Nevertheless, a well-chosen module name
can help a lot.
2.3 Generating the C++ stubs
From the IDL file, we use the IDL compiler to produce the C++ mapping
of the interface. The IDL compiler for omniORB is called omniidl.
Given the IDL file, omniidl produces two stub files: a C++ header file
and a C++ source file. For example, from the file echo.idl, the
following files are produced:
omniidl must be invoked with the -bcxx argument to
tell it to generate C++ stubs. The following command line generates
the stubs for echo.idl:
omniidl -bcxx echo.idl
If you are using our make environment (ODE), you don't need
to invoke omniidl explicitly. In the example file dir.mk, we
have the following line:
CORBA_INTERFACES = echo
That is all we need to instruct ODE to generate the stubs.
Remember, you won't find the stubs in your working directory because
all stubs are written into the stub directory at the top level
of your build tree.
The full arguments to omniidl are detailed in
chapter 5.
2.4 Object References and Servants
We contact a CORBA object through an object reference. The
actual implementation of a CORBA object is termed a servant.
Object references and servants are quite separate entities, and it is
important not to confuse the two. Client code deals purely with object
references, so there can be no confusion; object implementation code
must deal with both object references and servants. omniORB 4 uses
distinct C++ types for object references and servants, so the C++
compiler will complain if you use a servant when an object reference
is expected, or vice-versa.
-
Warning
omniORB 2.x did not use distinct types for object references
and servants, and often accepted a pointer to a servant when the CORBA
specification says it should only accept an object reference. If you
have code which relies on this, it will not compile with omniORB 3.x
or 4.x, even under the BOA compatibility mode.
2.5 A Quick Tour of the C++ stubs
The C++ stubs conform to the standard mapping defined in the CORBA
specification [OMG03]. It is important to understand the
mapping before you start writing any serious CORBA applications.
Before going any further, it is worth knowing what the mapping looks
like.
For the example interface Echo, the C++ mapping for its object
reference is Echo_ptr. The type is defined in echo.hh.
The relevant section of the code is reproduced below. The stub code
produced by other ORBs will be functionally equivalent to omniORB's,
but will almost certainly look very different.
class Echo;
class _objref_Echo;
class _impl_Echo;
typedef _objref_Echo* Echo_ptr;
class Echo {
public:
// Declarations for this interface type.
typedef Echo_ptr _ptr_type;
typedef Echo_var _var_type;
static _ptr_type _duplicate(_ptr_type);
static _ptr_type _narrow(CORBA::Object_ptr);
static _ptr_type _nil();
// ... methods generated for internal use
};
class _objref_Echo :
public virtual CORBA::Object, public virtual omniObjRef {
public:
char * echoString(const char* mesg);
// ... methods generated for internal use
};
In a compliant application, the operations defined in an object
interface should only be invoked via an object reference.
This is done by using arrow (`->') on an object reference.
For example, the call to the operation echoString() would be
written as obj->echoString(mesg).
It should be noted that the concrete type of an object reference is
opaque, i.e. you must not make any assumption about how an object
reference is implemented. In our example, even though Echo_ptr
is implemented as a pointer to the class _objref_Echo, it
should not be used as a C++ pointer, i.e. conversion to void*,
arithmetic operations, and relational operations including testing for
equality using operator==, must not be performed on the type.
In addition to class _objref_Echo, the mapping defines three
static member functions in the class Echo: _nil(),
_duplicate(), and _narrow().
The _nil() function returns a nil object reference of the Echo
interface. The following call is guaranteed to return TRUE:
CORBA::Boolean true_result = CORBA::is_nil(Echo::_nil());
Remember, CORBA::is_nil() is the only compliant way to check if an
object reference is nil. You should not use the equality
operator==. Many C++ ORBs use the null pointer to represent a
nil object reference; omniORB does not.
The _duplicate() function returns a new object reference of the
Echo interface. The new object reference can be used
interchangeably with the old object reference to perform an operation
on the same object. Duplications are required to satisfy the C++
mapping's reference counting memory management.
All CORBA objects inherit from the generic object
CORBA::Object. CORBA::Object_ptr is the object
reference type for CORBA::Object. Any _ptr object
reference is therefore conceptually inherited from
CORBA::Object_ptr. In other words, an object reference such as
Echo_ptr can be used in places where a
CORBA::Object_ptr is expected.
The _narrow() function takes an argument of type
CORBA::Object_ptr and returns a new object reference of the
Echo interface. If the actual (runtime) type of the argument
object reference can be narrowed to Echo_ptr, _narrow()
will return a valid object reference. Otherwise it will return a nil
object reference. Note that _narrow() performs an implicit
duplication of the object reference, so the result must be released.
Note also that _narrow() may involve a remote call to check the
type of the object, so it may throw CORBA system exceptions such as
COMM_FAILURE or OBJECT_NOT_EXIST.
To indicate that an object reference will no longer be accessed, you
must call the CORBA::release() operation. Its signature is as
follows:
namespace CORBA {
void release(CORBA::Object_ptr obj);
... // other methods
};
Once you have called CORBA::release() on an object reference, you
must no longer use that reference. This is because the associated
resources may have been deallocated. Notice that we are referring to
the resources associated with the object reference and not the
servant object. Servant objects are not affected by the lifetimes of
object references. In particular, servants are not deleted when all
references to them have been released—CORBA does not perform
distributed garbage collection.
As described above, the equality operator== should not be used
on object references. To test if two object references are equivalent,
the member function _is_equivalent() of the generic object
CORBA::Object can be used. Here is an example of its usage:
Echo_ptr A;
... // initialise A to a valid object reference
Echo_ptr B = A;
CORBA::Boolean true_result = A->_is_equivalent(B);
// Note: the above call is guaranteed to be TRUE
You have now been introduced to most of the operations that can be
invoked via Echo_ptr. The generic object CORBA::Object
provides a few more operations and all of them can be invoked via
Echo_ptr. These operations deal mainly with CORBA's dynamic
interfaces. You do not have to understand them in order to use the C++
mapping provided via the stubs.
Since object references must be released explicitly, their usage is
prone to error and can lead to memory leakage. The mapping defines the
object reference variable type to make life easier. In our
example, the variable type Echo_var is defined2.
The Echo_var is more convenient to use because it will
automatically release its object reference when it is deallocated or
when assigned a new object reference. For many operations, mixing data
of type Echo_var and Echo_ptr is possible without any
explicit operations or castings3. For instance, the operation
echoString() can be called using the arrow (`->') on a
Echo_var, as one can do with a Echo_ptr.
The usage of Echo_var is illustrated below:
Echo_var a;
Echo_ptr p = ... // somehow obtain an object reference
a = p; // a assumes ownership of p, must not use p any more
Echo_var b = a; // implicit _duplicate
p = ... // somehow obtain another object reference
a = Echo::_duplicate(p); // release old object reference
// a now holds a copy of p.
2.5.1 Servant Object Implementation
Before the Portable Object Adapter (POA) specification, many of the
details of how servant objects should be implemented and registered
with the system were unspecified, so server-side code was not portable
between ORBs. The POA specification rectifies that. omniORB 4 still
supports the old omniORB 2.x BOA mapping, but you should always use
the POA mapping for new code. BOA code and POA code can coexist within
a single program. See section 3.1 for details of the
BOA compatibility, and problems you may encounter.
For each object interface, a skeleton class is generated. In
our example, the POA specification says that the skeleton class for
interface Echo is named POA_Echo. A servant
implementation can be written by creating an implementation class that
derives from the skeleton class.
The skeleton class POA_Echo is defined in echo.hh. The
relevant section of the code is reproduced below.
class POA_Echo :
public virtual PortableServer::ServantBase
{
public:
Echo_ptr _this();
virtual char * echoString(const char* mesg) = 0;
// ...
};
The code fragment shows the only member functions that can be used in
the object implementation code. Other member functions are generated
for internal use only. As with the code generated for object
references, other POA-based ORBs will generate code which looks
different, but is functionally equivalent to this.
- echoString()
It is through this abstract function that an implementation class
provides the implementation of the echoString() operation. Notice
that its signature is the same as the echoString() function that
can be invoked via the Echo_ptr object reference.
- _this()
This function returns an object reference for the target object,
provided the POA policies permit it. The returned value must be
deallocated via CORBA::release(). See section 2.8
for an example of how this function is used.
2.6 Writing the servant implementation
You define an implementation class to provide the servant
implementation. There is little constraint on how you design your
implementation class except that it has to inherit from the stubs'
skeleton class and to implement all the abstract functions defined in
the skeleton class. Each of these abstract functions corresponds to an
operation of the interface. They are the hooks for the ORB to perform
upcalls to your implementation.
Here is a simple implementation of the Echo object.
class Echo_i : public POA_Echo
{
public:
inline Echo_i() {}
virtual ~Echo_i() {}
virtual char* echoString(const char* mesg);
};
char* Echo_i::echoString(const char* mesg)
{
return CORBA::string_dup(mesg);
}
There are four points to note here:
- Storage Responsibilities
A string, which is used both as an in argument and the return value of
echoString(), is a variable size data type. Other examples of
variable size data types include sequences, type `any', etc. For these
data types, you must be clear about whose responsibility it is to
allocate and release the associated storage. As a rule of thumb, the
client (or the caller to the implementation functions) owns the
storage of all IN arguments, the object implementation (or the callee)
must copy the data if it wants to retain a copy. For OUT arguments and
return values, the object implementation allocates the storage and
passes the ownership to the client. The client must release the
storage when the variables will no longer be used. For details,
please refer to the C++ mapping specification.
- Multi-threading
As omniORB is fully multithreaded, multiple threads may perform the
same upcall to your implementation concurrently. It is up to your
implementation to synchronise the threads' accesses to shared data.
In our simple example, we have no shared data to protect so no thread
synchronisation is necessary.
Alternatively, you can create a POA which has the
SINGLE_THREAD_MODEL Thread Policy. This guarantees that all
calls to that POA are processed sequentially.
- Reference Counting
All servant objects are reference counted. The base
PortableServer::ServantBase class from which all servant
skeleton classes derive defines member functions named _add_ref()
and _remove_ref()4. The reference
counting means that an Echo_i instance will be deleted when no
more references to it are held by application code or the POA
itself. Note that this is totally separate from the reference counting
which is associated with object references—a servant object is
never deleted due to a CORBA object reference being released.
- Instantiation
Servants are usually instantiated on the heap, i.e. using the
new operator. However, they can also be created on the stack as
automatic variables. If you do that, it is vital to make sure that the
servant has been deactivated, and thus released by the POA, before the
variable goes out of scope and is destroyed.
2.7 Writing the client
Here is an example of how an Echo_ptr object reference is
used.
1 void
2 hello(CORBA::Object_ptr obj)
3 {
4 Echo_var e = Echo::_narrow(obj);
5
6 if (CORBA::is_nil(e)) {
7 cerr << "cannot invoke on a nil object reference."
8 << endl;
9 return;
10 }
11
12 CORBA::String_var src = (const char*) "Hello!";
13 CORBA::String_var dest;
14
15 dest = e->echoString(src);
16
17 cerr << "I said,\"" << src << "\"."
18 << " The Object said,\"" << dest <<"\"" << endl;
19 }
Briefly, the hello() function accepts a generic object reference.
The object reference (obj) is narrowed to Echo_ptr. If
the object reference returned by Echo::_narrow() is not nil, the
operation echoString() is invoked. Finally, both the argument to
and the return value of echoString() are printed to cerr.
The example also illustrates how T_var types are used. As was
explained in the previous section, T_var types take care of
storage allocation and release automatically when variables are
reassigned or when the variables go out of scope.
In line 4, the variable e takes over the storage responsibility
of the object reference returned by Echo::_narrow(). The object
reference is released by the destructor of e. It is called
automatically when the function returns. Lines 6 and 15 show how a
Echo_var variable is used. As explained earlier, the
Echo_var type can be used interchangeably with the
Echo_ptr type.
The argument and the return value of echoString() are stored in
CORBA::String_var variables src and dest
respectively. The strings managed by the variables are deallocated by
the destructor of CORBA::String_var. It is called
automatically when the variable goes out of scope (as the function
returns). Line 15 shows how CORBA::String_var variables are
used. They can be used in place of a string (for which the mapping is
char*)5. As used in line 12, assigning a constant string
(const char*) to a CORBA::String_var causes the string
to be copied. On the other hand, assigning a char* to a
CORBA::String_var, as used in line 15, causes the latter to
assume the ownership of the string6.
Under the C++ mapping, T_var types are provided for all the
non-basic data types. It is obvious that one should use automatic
variables whenever possible both to avoid memory leaks and to maximise
performance. However, when one has to allocate data items on the heap,
it is a good practice to use the T_var types to manage the
heap storage.
2.8 Example 1 — Colocated Client and Implementation
Having introduced the client and the object implementation, we can now
describe how to link up the two via the ORB and POA. In this section,
we describe an example in which both the client and the object
implementation are in the same address space. In the next two
sections, we shall describe the case where the two are in different
address spaces.
The code for this example is reproduced below:
1 int
2 main(int argc, char **argv)
3 {
4 CORBA::ORB_ptr orb = CORBA::ORB_init(argc,argv,"omniORB4");
5
6 CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
7 PortableServer::POA_var poa = PortableServer::POA::_narrow(obj);
8
9 Echo_i *myecho = new Echo_i();
10 PortableServer::ObjectId_var myechoid = poa->activate_object(myecho);
11
12 Echo_var myechoref = myecho->_this();
13 myecho->_remove_ref();
14
15 PortableServer::POAManager_var pman = poa->the_POAManager();
16 pman->activate();
17
18 hello(myechoref);
19
20 orb->destroy();
21 return 0;
22 }
The example illustrates several important interactions among the ORB,
the POA, the servant, and the client. Here are the details:
2.8.1 ORB initialisation
- Line 4
The ORB is initialised by calling the CORBA::ORB_init()
function. The function uses the optional 3rd argument to determine
which ORB should be returned. Unless you are using omniORB specific
features, it is usually best to leave it out, and get the default
ORB. To explicitly ask for omniORB 4.x, this argument must be
`omniORB4'7.
CORBA::ORB_init() takes the list of command line arguments and
processes any that start `-ORB'. It removes these arguments
from the list, so application code does not have to deal with them.
If any error occurs during ORB initialisation, such as invalid ORB
arguments, or an invalid configuration file, the
CORBA::INITIALIZE system exception is raised.
2.8.2 Obtaining the Root POA
- Lines 6–7
To activate our servant object and make it available to clients, we
must register it with a POA. In this example, we use the Root
POA, rather than creating any child POAs. The Root POA is found with
orb->resolve_initial_references(), which returns a plain
CORBA::Object. In line 7, we narrow the reference to the right
type for a POA.
A POA's behaviour is governed by its policies. The Root POA has
suitable policies for many simple servers, and closely matches the
`policies' used by omniORB 2's BOA. See Chapter 11 of the CORBA 2.6
specification[OMG01] for details of all the POA policies
which are available.
2.8.3 Object initialisation
- Line 9
An instance of the Echo servant is initialised using the new
operator.
- Line 10
The servant object is activated in the Root POA using
poa->activate_object(), which returns an object identifier
(of type PortableServer::ObjectId*). The object id must
be passed back to various POA operations. The caller is responsible
for freeing the object id, so it is assigned to a _var type.
- Line 12
The object reference is obtained from the servant object by calling
_this(). Like all object references, the return value of
_this() must be released by CORBA::release() when it is no
longer needed. In this case, we assign it to a _var type, so
the release is implicit at the end of the function.
One of the important characteristics of an object reference is that it
is completely location transparent. A client can invoke on the object
using its object reference without any need to know whether the
servant object is colocated in the same address space or is in a
different address space.
In the case of colocated client and servant, omniORB is able to
short-circuit the client calls so they do not involve IIOP. The calls
still go through the POA, however, so the various POA policies affect
local calls in the same way as remote ones. This optimisation is
applicable not only to object references returned by _this(), but
to any object references that are passed around within the same
address space or received from other address spaces via remote calls.
- Line 13
The server code releases the reference it holds to the servant
object. The only reference to that object is now held by the POA (it
gained the reference on the call to activate_object()), so when
the object is deactivated (or the POA is destroyed), the servant
object will be deleted automatically. After this point, the code must
no longer use the myecho pointer.
2.8.4 Activating the POA
- Lines 15–16
POAs are initially in the holding state, meaning that incoming
requests are blocked. Lines 15 and 16 acquire a reference to the POA's
POA manager, and use it to put the POA into the active state.
Incoming requests are now served. Failing to activate the POA
is one of the most common programming mistakes. If your program
appears deadlocked, make sure you activated the POA!
2.8.5 Performing a call
- Line 18
At long last, we can call hello() with this object reference. The
argument is widened implicitly to the generic object reference
CORBA::Object_ptr.
2.8.6 ORB destruction
- Line 20
Shutdown the ORB permanently. This call causes the ORB to release all
its resources, e.g. internal threads, and also to deactivate any
servant objects which are currently active. When it deactivates the
Echo_i instance, the servant's reference count drops to zero,
so the servant is deleted.
This call is particularly important when writing a CORBA DLL on
Windows NT that is to be used from ActiveX. If this call is absent,
the application will hang when the CORBA DLL is unloaded.
2.9 Example 2 — Different Address Spaces
In this example, the client and the object implementation reside in
two different address spaces. The code of this example is almost the
same as the previous example. The only difference is the extra work
which needs to be done to pass the object reference from the object
implementation to the client.
The simplest (and quite primitive) way to pass an object reference
between two address spaces is to produce a stringified version
of the object reference and to pass this string to the client as a
command-line argument. The string is then converted by the client
into a proper object reference. This method is used in this
example. In the next example, we shall introduce a better way of
passing the object reference using the CORBA Naming Service.
2.9.1 Object Implementation: Making a Stringified Object Reference
The main() function of the server side is reproduced below. The
full listing (eg2_impl.cc) can be found at the end of this
chapter.
1 int main(int argc, char** argv)
2 {
3 CORBA::ORB_var orb = CORBA::ORB_init(argc, argv);
4
5 CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
6 PortableServer::POA_var poa = PortableServer::POA::_narrow(obj);
7
8 Echo_i* myecho = new Echo_i();
9
10 PortableServer::ObjectId_var myechoid = poa->activate_object(myecho);
11
12 obj = myecho->_this();
13 CORBA::String_var sior(orb->object_to_string(obj));
14 cerr << "'" << (char*)sior << "'" << endl;
15
16 myecho->_remove_ref();
17
18 PortableServer::POAManager_var pman = poa->the_POAManager();
19 pman->activate();
20
21 orb->run();
22 orb->destroy();
23 return 0;
24 }
The stringified object reference is obtained by calling the ORB's
object_to_string() function (line 13). This results in a
string starting with the signature `IOR:' and followed by some
hexadecimal digits. All CORBA 2 compliant ORBs are able to convert the
string into its internal representation of a so-called Interoperable
Object Reference (IOR). The IOR contains the location information and
a key to uniquely identify the object implementation in its own
address space. From the IOR, an object reference can be constructed.
2.9.2 Client: Using a Stringified Object Reference
The stringified object reference is passed to the client as a
command-line argument. The client uses the ORB's
string_to_object() function to convert the string into a generic
object reference (CORBA::Object_ptr). The relevant section of
the code is reproduced below. The full listing (eg2_clt.cc) can
be found at the end of this chapter.
try {
CORBA::Object_var obj = orb->string_to_object(argv[1]);
hello(obj);
}
catch(CORBA::TRANSIENT&) {
... // code to handle transient exception...
}
2.9.3 Catching System Exceptions
When omniORB detects an error condition, it may raise a system
exception. The CORBA specification defines a series of exceptions
covering most of the error conditions that an ORB may encounter. The
client may choose to catch these exceptions and recover from the error
condition8. For instance, the code fragment, shown in
section 2.9.2, catches the TRANSIENT system exception
which indicates that the object could not be contacted at the time of
the call, usually meaning the server is not running.
All system exceptions inherit from CORBA::SystemException. With
compilers that properly support RTTI9, a single catch of CORBA::SystemException will
catch all the different system exceptions thrown by omniORB.
When omniORB detects an internal error such as corrupt data or invalid
conditions, it raises the exception omniORB::fatalException.
When this exception is raised, it is not sensible to proceed with any
operation that involves the ORB's runtime. It is best to exit the
program immediately. The exception structure carried by
omniORB::fatalException contains the exact location (the file
name and the line number) where the exception is raised. In most
cases, fatalExceptions occur due to incorrect behaviour by the
application code, but they may be caused by bugs in omniORB.
2.9.4 Lifetime of a CORBA object
CORBA objects are either transient or persistent. The
majority are transient, meaning that the lifetime of the CORBA object
(as contacted through an object reference) is the same as the lifetime
of its servant object. Persistent objects can live beyond the
destruction of their servant object, the POA they were created in, and
even their process. Persistent objects are, of course, only
contactable when their associated servants are active, or can be
activated by their POA with a servant manager10. A reference to
a persistent object can be published, and will remain valid even if
the server process is restarted.
A POA's Lifespan Policy determines whether objects created within it
are transient or persistent. The Root POA has the TRANSIENT
policy.
An alternative to creating persistent objects is to register object
references in a naming service and bind them to fixed path
names. Clients can bind to the object implementations at run time by
asking the naming service to resolve the path names to the object
references. CORBA defines a standard naming service, which is a
component of the Common Object Services (COS) [OMG98],
that can be used for this purpose. The next section describes an
example of how to use the COS Naming Service.
2.10 Example 3 — Using the Naming Service
In this example, the object implementation uses the Naming
Service [OMG98] to pass on the object reference to the
client. This method is far more practical than using stringified
object references. The full listing of the object implementation
(eg3_impl.cc) and the client (eg3_clt.cc) can be found
at the end of this chapter.
The names used by the Naming service consist of a sequence of
name components. Each name component has an id and a
kind field, both of which are strings. All name components
except the last one are bound to a naming context. A naming context is
analogous to a directory in a filing system: it can contain names of
object references or other naming contexts. The last name component is
bound to an object reference.
Sequences of name components can be represented as a flat string,
using `.' to separate the id and kind fields, and `/' to separate name
components from each other11. In our example, the Echo object
reference is bound to the stringified name
`test.my_context/Echo.Object'.
The kind field is intended to describe the name in a
syntax-independent way. The naming service does not interpret, assign,
or manage these values. However, both the name and the kind attribute
must match for a name lookup to succeed. In this example, the kind
values for test and Echo are chosen to be
`my_context' and `Object' respectively. This is an
arbitrary choice as there is no standardised set of kind values.
2.10.1 Obtaining the Root Context Object Reference
The initial contact with the Naming Service can be established via the
root context. The object reference to the root context is
provided by the ORB and can be obtained by calling
resolve_initial_references(). The following code fragment shows
how it is used:
CORBA::ORB_ptr orb = CORBA::ORB_init(argc,argv);
CORBA::Object_var initServ;
initServ = orb->resolve_initial_references("NameService");
CosNaming::NamingContext_var rootContext;
rootContext = CosNaming::NamingContext::_narrow(initServ);
Remember, omniORB constructs its internal list of initial references
at initialisation time using the information provided in the
configuration file omniORB.cfg, or given on the command
line. If this file is not present, the internal list will be empty and
resolve_initial_references() will raise a
CORBA::ORB::InvalidName exception.
2.10.2 The Naming Service Interface
It is beyond the scope of this chapter to describe in detail the
Naming Service interface. You should consult the CORBA services
specification [OMG98] (chapter 3). The code listed in
eg3_impl.cc and eg3_clt.cc are good examples of how the
service can be used. Please spend time to study the examples
carefully.
2.11 Example 4 — Using tie implementation templates
omniORB supports tie implementation templates as an alternative
way of providing servant classes. If you use the -Wbtp option
to omniidl, it generates an extra template class for each interface.
This template class can be used to tie a C++ class to the skeleton
class of the interface.
The source code in eg3_tieimpl.cc at the end of this chapter
illustrates how the template class can be used. The code is almost
identical to eg3_impl.cc with only a few changes.
Firstly, the servant class Echo_i does not inherit from any
stub classes. This is the main benefit of using the template class
because there are applications in which it is difficult to require
every servant class to derive from CORBA classes.
Secondly, the instantiation of a CORBA object now involves creating an
instance of the implementation class and an instance of the
template. Here is the relevant code fragment:
class Echo_i { ... };
Echo_i *myimpl = new Echo_i();
POA_Echo_tie<Echo_i> myecho(myimpl);
PortableServer::ObjectId_var myechoid = poa->activate_object(&myecho);
For interface Echo, the name of its tie implementation template
is POA_Echo_tie. The template parameter is the servant
class that contains an implementation of each of the operations
defined in the interface. As used above, the tie template takes
ownership of the Echo_i instance, and deletes it when the tie
object goes out of scope. The tie constructor has an optional boolean
argument (defaulted to true) which indicates whether or not it should
delete the servant object. For full details of using tie templates,
see the CORBA C++ mapping specification.
2.12 Source Listings
// eg1.cc - This is the source code of example 1 used in Chapter 2
// "The Basics" of the omniORB user guide.
//
// In this example, both the object implementation and the
// client are in the same process.
//
// Usage: eg1
//
#include <echo.hh>
#ifdef HAVE_STD
# include <iostream>
using namespace std;
#else
# include <iostream.h>
#endif
// This is the object implementation.
class Echo_i : public POA_Echo
{
public:
inline Echo_i() {}
virtual ~Echo_i() {}
virtual char* echoString(const char* mesg);
};
char* Echo_i::echoString(const char* mesg)
{
return CORBA::string_dup(mesg);
}
//////////////////////////////////////////////////////////////////////
// This function acts as a client to the object.
static void hello(Echo_ptr e)
{
if( CORBA::is_nil(e) ) {
cerr << "hello: The object reference is nil!\n" << endl;
return;
}
CORBA::String_var src = (const char*) "Hello!";
// String literals are (char*) rather than (const char*) on some
// old compilers. Thus it is essential to cast to (const char*)
// here to ensure that the string is copied, so that the
// CORBA::String_var does not attempt to 'delete' the string
// literal.
CORBA::String_var dest = e->echoString(src);
cout << "I said, \"" << (char*)src << "\"." << endl
<< "The Echo object replied, \"" << (char*)dest <<"\"." << endl;
}
//////////////////////////////////////////////////////////////////////
int main(int argc, char** argv)
{
try {
// Initialise the ORB.
CORBA::ORB_var orb = CORBA::ORB_init(argc, argv);
// Obtain a reference to the root POA.
CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
PortableServer::POA_var poa = PortableServer::POA::_narrow(obj);
// We allocate the object on the heap. Since this is a reference
// counted object, it will be deleted by the POA when it is no
// longer needed.
Echo_i* myecho = new Echo_i();
// Activate the object. This tells the POA that this object is
// ready to accept requests.
PortableServer::ObjectId_var myechoid = poa->activate_object(myecho);
// Obtain a reference to the object.
Echo_var myechoref = myecho->_this();
// Decrement the reference count of the object implementation, so
// that it will be properly cleaned up when the POA has determined
// that it is no longer needed.
myecho->_remove_ref();
// Obtain a POAManager, and tell the POA to start accepting
// requests on its objects.
PortableServer::POAManager_var pman = poa->the_POAManager();
pman->activate();
// Do the client-side call.
hello(myechoref);
// Clean up all the resources.
orb->destroy();
}
catch(CORBA::SystemException& ex) {
cerr << "Caught CORBA::" << ex._name() << endl;
}
catch(CORBA::Exception& ex) {
cerr << "Caught CORBA::Exception: " << ex._name() << endl;
}
catch(omniORB::fatalException& fe) {
cerr << "Caught omniORB::fatalException:" << endl;
cerr << " file: " << fe.file() << endl;
cerr << " line: " << fe.line() << endl;
cerr << " mesg: " << fe.errmsg() << endl;
}
return 0;
}
// eg2_impl.cc - This is the source code of example 2 used in Chapter 2
// "The Basics" of the omniORB user guide.
//
// This is the object implementation.
//
// Usage: eg2_impl
//
// On startup, the object reference is printed to cerr as a
// stringified IOR. This string should be used as the argument to
// eg2_clt.
//
#include <echo.hh>
#ifdef HAVE_STD
# include <iostream>
using namespace std;
#else
# include <iostream.h>
#endif
class Echo_i : public POA_Echo
{
public:
inline Echo_i() {}
virtual ~Echo_i() {}
virtual char* echoString(const char* mesg);
};
char* Echo_i::echoString(const char* mesg)
{
cout << "Upcall " << mesg << endl;
return CORBA::string_dup(mesg);
}
//////////////////////////////////////////////////////////////////////
int main(int argc, char** argv)
{
try {
CORBA::ORB_var orb = CORBA::ORB_init(argc, argv);
CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
PortableServer::POA_var poa = PortableServer::POA::_narrow(obj);
Echo_i* myecho = new Echo_i();
PortableServer::ObjectId_var myechoid = poa->activate_object(myecho);
// Obtain a reference to the object, and print it out as a
// stringified IOR.
obj = myecho->_this();
CORBA::String_var sior(orb->object_to_string(obj));
cout << (char*)sior << endl;
myecho->_remove_ref();
PortableServer::POAManager_var pman = poa->the_POAManager();
pman->activate();
orb->run();
}
catch(CORBA::SystemException& ex) {
cerr << "Caught CORBA::" << ex._name() << endl;
}
catch(CORBA::Exception& ex) {
cerr << "Caught CORBA::Exception: " << ex._name() << endl;
}
catch(omniORB::fatalException& fe) {
cerr << "Caught omniORB::fatalException:" << endl;
cerr << " file: " << fe.file() << endl;
cerr << " line: " << fe.line() << endl;
cerr << " mesg: " << fe.errmsg() << endl;
}
return 0;
}
// eg2_clt.cc - This is the source code of example 2 used in Chapter 2
// "The Basics" of the omniORB user guide.
//
// This is the client. The object reference is given as a
// stringified IOR on the command line.
//
// Usage: eg2_clt <object reference>
//
#include <echo.hh>
#ifdef HAVE_STD
# include <iostream>
# include <fstream>
using namespace std;
#else
# include <iostream.h>
#endif
static void hello(Echo_ptr e)
{
CORBA::String_var src = (const char*) "Hello!";
CORBA::String_var dest = e->echoString(src);
cout << "I said, \"" << (char*)src << "\"." << endl
<< "The Echo object replied, \"" << (char*)dest <<"\"." << endl;
}
//////////////////////////////////////////////////////////////////////
int main(int argc, char** argv)
{
try {
CORBA::ORB_var orb = CORBA::ORB_init(argc, argv);
if( argc != 2 ) {
cerr << "usage: eg2_clt <object reference>" << endl;
return 1;
}
CORBA::Object_var obj = orb->string_to_object(argv[1]);
Echo_var echoref = Echo::_narrow(obj);
if( CORBA::is_nil(echoref) ) {
cerr << "Can't narrow reference to type Echo (or it was nil)." << endl;
return 1;
}
for (CORBA::ULong count=0; count<10; count++)
hello(echoref);
orb->destroy();
}
catch(CORBA::TRANSIENT&) {
cerr << "Caught system exception TRANSIENT -- unable to contact the "
<< "server." << endl;
}
catch(CORBA::SystemException& ex) {
cerr << "Caught a CORBA::" << ex._name() << endl;
}
catch(CORBA::Exception& ex) {
cerr << "Caught CORBA::Exception: " << ex._name() << endl;
}
catch(omniORB::fatalException& fe) {
cerr << "Caught omniORB::fatalException:" << endl;
cerr << " file: " << fe.file() << endl;
cerr << " line: " << fe.line() << endl;
cerr << " mesg: " << fe.errmsg() << endl;
}
return 0;
}
// eg3_impl.cc - This is the source code of example 3 used in Chapter 2
// "The Basics" of the omniORB user guide.
//
// This is the object implementation.
//
// Usage: eg3_impl
//
// On startup, the object reference is registered with the
// COS naming service. The client uses the naming service to
// locate this object.
//
// The name which the object is bound to is as follows:
// root [context]
// |
// test [context] kind [my_context]
// |
// Echo [object] kind [Object]
//
#include <echo.hh>
#ifdef HAVE_STD
# include <iostream>
using namespace std;
#else
# include <iostream.h>
#endif
static CORBA::Boolean bindObjectToName(CORBA::ORB_ptr, CORBA::Object_ptr);
class Echo_i : public POA_Echo
{
public:
inline Echo_i() {}
virtual ~Echo_i() {}
virtual char* echoString(const char* mesg);
};
char* Echo_i::echoString(const char* mesg)
{
return CORBA::string_dup(mesg);
}
//////////////////////////////////////////////////////////////////////
int
main(int argc, char **argv)
{
try {
CORBA::ORB_var orb = CORBA::ORB_init(argc, argv);
CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
PortableServer::POA_var poa = PortableServer::POA::_narrow(obj);
Echo_i* myecho = new Echo_i();
PortableServer::ObjectId_var myechoid = poa->activate_object(myecho);
// Obtain a reference to the object, and register it in
// the naming service.
obj = myecho->_this();
CORBA::String_var x;
x = orb->object_to_string(obj);
cout << x << endl;
if( !bindObjectToName(orb, obj) )
return 1;
myecho->_remove_ref();
PortableServer::POAManager_var pman = poa->the_POAManager();
pman->activate();
orb->run();
}
catch(CORBA::SystemException& ex) {
cerr << "Caught CORBA::" << ex._name() << endl;
}
catch(CORBA::Exception& ex) {
cerr << "Caught CORBA::Exception: " << ex._name() << endl;
}
catch(omniORB::fatalException& fe) {
cerr << "Caught omniORB::fatalException:" << endl;
cerr << " file: " << fe.file() << endl;
cerr << " line: " << fe.line() << endl;
cerr << " mesg: " << fe.errmsg() << endl;
}
return 0;
}
//////////////////////////////////////////////////////////////////////
static CORBA::Boolean
bindObjectToName(CORBA::ORB_ptr orb, CORBA::Object_ptr objref)
{
CosNaming::NamingContext_var rootContext;
try {
// Obtain a reference to the root context of the Name service:
CORBA::Object_var obj;
obj = orb->resolve_initial_references("NameService");
// Narrow the reference returned.
rootContext = CosNaming::NamingContext::_narrow(obj);
if( CORBA::is_nil(rootContext) ) {
cerr << "Failed to narrow the root naming context." << endl;
return 0;
}
}
catch (CORBA::NO_RESOURCES&) {
cerr << "Caught NO_RESOURCES exception. You must configure omniORB "
<< "with the location" << endl
<< "of the naming service." << endl;
return 0;
}
catch (CORBA::ORB::InvalidName&) {
// This should not happen!
cerr << "Service required is invalid [does not exist]." << endl;
return 0;
}
try {
// Bind a context called "test" to the root context:
CosNaming::Name contextName;
contextName.length(1);
contextName[0].id = (const char*) "test"; // string copied
contextName[0].kind = (const char*) "my_context"; // string copied
// Note on kind: The kind field is used to indicate the type
// of the object. This is to avoid conventions such as that used
// by files (name.type -- e.g. test.ps = postscript etc.)
CosNaming::NamingContext_var testContext;
try {
// Bind the context to root.
testContext = rootContext->bind_new_context(contextName);
}
catch(CosNaming::NamingContext::AlreadyBound& ex) {
// If the context already exists, this exception will be raised.
// In this case, just resolve the name and assign testContext
// to the object returned:
CORBA::Object_var obj;
obj = rootContext->resolve(contextName);
testContext = CosNaming::NamingContext::_narrow(obj);
if( CORBA::is_nil(testContext) ) {
cerr << "Failed to narrow naming context." << endl;
return 0;
}
}
// Bind objref with name Echo to the testContext:
CosNaming::Name objectName;
objectName.length(1);
objectName[0].id = (const char*) "Echo"; // string copied
objectName[0].kind = (const char*) "Object"; // string copied
try {
testContext->bind(objectName, objref);
}
catch(CosNaming::NamingContext::AlreadyBound& ex) {
testContext->rebind(objectName, objref);
}
// Note: Using rebind() will overwrite any Object previously bound
// to /test/Echo with obj.
// Alternatively, bind() can be used, which will raise a
// CosNaming::NamingContext::AlreadyBound exception if the name
// supplied is already bound to an object.
// Amendment: When using OrbixNames, it is necessary to first try bind
// and then rebind, as rebind on it's own will throw a NotFoundexception if
// the Name has not already been bound. [This is incorrect behaviour -
// it should just bind].
}
catch(CORBA::TRANSIENT& ex) {
cerr << "Caught system exception TRANSIENT -- unable to contact the "
<< "naming service." << endl
<< "Make sure the naming server is running and that omniORB is "
<< "configured correctly." << endl;
return 0;
}
catch(CORBA::SystemException& ex) {
cerr << "Caught a CORBA::" << ex._name()
<< " while using the naming service." << endl;
return 0;
}
return 1;
}
// eg3_clt.cc - This is the source code of example 3 used in Chapter 2
// "The Basics" of the omniORB user guide.
//
// This is the client. It uses the COSS naming service
// to obtain the object reference.
//
// Usage: eg3_clt
//
//
// On startup, the client lookup the object reference from the
// COS naming service.
//
// The name which the object is bound to is as follows:
// root [context]
// |
// text [context] kind [my_context]
// |
// Echo [object] kind [Object]
//
#include <echo.hh>
#ifdef HAVE_STD
# include <iostream>
using namespace std;
#else
# include <iostream.h>
#endif
static CORBA::Object_ptr getObjectReference(CORBA::ORB_ptr orb);
static void hello(Echo_ptr e)
{
if( CORBA::is_nil(e) ) {
cerr << "hello: The object reference is nil!\n" << endl;
return;
}
CORBA::String_var src = (const char*) "Hello!";
CORBA::String_var dest = e->echoString(src);
cerr << "I said, \"" << (char*)src << "\"." << endl
<< "The Echo object replied, \"" << (char*)dest <<"\"." << endl;
}
//////////////////////////////////////////////////////////////////////
int
main (int argc, char **argv)
{
try {
CORBA::ORB_var orb = CORBA::ORB_init(argc, argv);
CORBA::Object_var obj = getObjectReference(orb);
Echo_var echoref = Echo::_narrow(obj);
for (CORBA::ULong count=0; count < 10; count++)
hello(echoref);
orb->destroy();
}
catch(CORBA::TRANSIENT&) {
cerr << "Caught system exception TRANSIENT -- unable to contact the "
<< "server." << endl;
}
catch(CORBA::SystemException& ex) {
cerr << "Caught a CORBA::" << ex._name() << endl;
}
catch(CORBA::Exception& ex) {
cerr << "Caught CORBA::Exception: " << ex._name() << endl;
}
catch(omniORB::fatalException& fe) {
cerr << "Caught omniORB::fatalException:" << endl;
cerr << " file: " << fe.file() << endl;
cerr << " line: " << fe.line() << endl;
cerr << " mesg: " << fe.errmsg() << endl;
}
return 0;
}
//////////////////////////////////////////////////////////////////////
static CORBA::Object_ptr
getObjectReference(CORBA::ORB_ptr orb)
{
CosNaming::NamingContext_var rootContext;
try {
// Obtain a reference to the root context of the Name service:
CORBA::Object_var obj;
obj = orb->resolve_initial_references("NameService");
// Narrow the reference returned.
rootContext = CosNaming::NamingContext::_narrow(obj);
if( CORBA::is_nil(rootContext) ) {
cerr << "Failed to narrow the root naming context." << endl;
return CORBA::Object::_nil();
}
}
catch (CORBA::NO_RESOURCES&) {
cerr << "Caught NO_RESOURCES exception. You must configure omniORB "
<< "with the location" << endl
<< "of the naming service." << endl;
return 0;
}
catch(CORBA::ORB::InvalidName& ex) {
// This should not happen!
cerr << "Service required is invalid [does not exist]." << endl;
return CORBA::Object::_nil();
}
// Create a name object, containing the name test/context:
CosNaming::Name name;
name.length(2);
name[0].id = (const char*) "test"; // string copied
name[0].kind = (const char*) "my_context"; // string copied
name[1].id = (const char*) "Echo";
name[1].kind = (const char*) "Object";
// Note on kind: The kind field is used to indicate the type
// of the object. This is to avoid conventions such as that used
// by files (name.type -- e.g. test.ps = postscript etc.)
try {
// Resolve the name to an object reference.
return rootContext->resolve(name);
}
catch(CosNaming::NamingContext::NotFound& ex) {
// This exception is thrown if any of the components of the
// path [contexts or the object] aren't found:
cerr << "Context not found." << endl;
}
catch(CORBA::TRANSIENT& ex) {
cerr << "Caught system exception TRANSIENT -- unable to contact the "
<< "naming service." << endl
<< "Make sure the naming server is running and that omniORB is "
<< "configured correctly." << endl;
}
catch(CORBA::SystemException& ex) {
cerr << "Caught a CORBA::" << ex._name()
<< " while using the naming service." << endl;
return 0;
}
return CORBA::Object::_nil();
}
2.12.6 eg3_tieimpl.cc
// eg3_tieimpl.cc - This example is similar to eg3_impl.cc except that
// the tie implementation skeleton is used.
//
// This is the object implementation.
//
// Usage: eg3_tieimpl
//
// On startup, the object reference is registered with the
// COS naming service. The client uses the naming service to
// locate this object.
//
// The name which the object is bound to is as follows:
// root [context]
// |
// test [context] kind [my_context]
// |
// Echo [object] kind [Object]
//
#include <echo.hh>
#ifdef HAVE_STD
# include <iostream>
using namespace std;
#else
# include <iostream.h>
#endif
static CORBA::Boolean bindObjectToName(CORBA::ORB_ptr,CORBA::Object_ptr);
// This is the object implementation. Notice that it does not inherit
// from any stub class, and notice that the echoString() member
// function does not have to be virtual.
class Echo_i {
public:
inline Echo_i() {}
inline ~Echo_i() {}
char* echoString(const char* mesg);
};
char* Echo_i::echoString(const char* mesg)
{
return CORBA::string_dup(mesg);
}
//////////////////////////////////////////////////////////////////////
int main(int argc, char** argv)
{
try {
CORBA::ORB_var orb = CORBA::ORB_init(argc, argv);
CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
PortableServer::POA_var poa = PortableServer::POA::_narrow(obj);
// Note that the <myecho> tie object is constructed on the stack
// here. It will delete its implementation (myimpl) when it it
// itself destroyed (when it goes out of scope). It is essential
// however to ensure that such servants are not deleted whilst
// still activated.
//
// Tie objects can of course be allocated on the heap using new,
// in which case they are deleted when their reference count
// becomes zero, as with any other servant object.
Echo_i* myimpl = new Echo_i();
POA_Echo_tie<Echo_i> myecho(myimpl);
PortableServer::ObjectId_var myechoid = poa->activate_object(&myecho);
// Obtain a reference to the object, and register it in
// the naming service.
obj = myecho._this();
if( !bindObjectToName(orb, obj) )
return 1;
PortableServer::POAManager_var pman = poa->the_POAManager();
pman->activate();
orb->run();
}
catch(CORBA::SystemException& ex) {
cerr << "Caught CORBA::" << ex._name() << endl;
}
catch(CORBA::Exception& ex) {
cerr << "Caught CORBA::Exception: " << ex._name() << endl;
}
catch(omniORB::fatalException& fe) {
cerr << "Caught omniORB::fatalException:" << endl;
cerr << " file: " << fe.file() << endl;
cerr << " line: " << fe.line() << endl;
cerr << " mesg: " << fe.errmsg() << endl;
}
return 0;
}
//////////////////////////////////////////////////////////////////////
static CORBA::Boolean
bindObjectToName(CORBA::ORB_ptr orb, CORBA::Object_ptr objref)
{
CosNaming::NamingContext_var rootContext;
try {
// Obtain a reference to the root context of the Name service:
CORBA::Object_var obj;
obj = orb->resolve_initial_references("NameService");
// Narrow the reference returned.
rootContext = CosNaming::NamingContext::_narrow(obj);
if( CORBA::is_nil(rootContext) ) {
cerr << "Failed to narrow the root naming context." << endl;
return 0;
}
}
catch (CORBA::NO_RESOURCES&) {
cerr << "Caught NO_RESOURCES exception. You must configure omniORB "
<< "with the location" << endl
<< "of the naming service." << endl;
return 0;
}
catch (CORBA::ORB::InvalidName&) {
// This should not happen!
cerr << "Service required is invalid [does not exist]." << endl;
return 0;
}
try {
// Bind a context called "test" to the root context:
CosNaming::Name contextName;
contextName.length(1);
contextName[0].id = (const char*) "test"; // string copied
contextName[0].kind = (const char*) "my_context"; // string copied
// Note on kind: The kind field is used to indicate the type
// of the object. This is to avoid conventions such as that used
// by files (name.type -- e.g. test.ps = postscript etc.)
CosNaming::NamingContext_var testContext;
try {
// Bind the context to root.
testContext = rootContext->bind_new_context(contextName);
}
catch(CosNaming::NamingContext::AlreadyBound& ex) {
// If the context already exists, this exception will be raised.
// In this case, just resolve the name and assign testContext
// to the object returned:
CORBA::Object_var obj;
obj = rootContext->resolve(contextName);
testContext = CosNaming::NamingContext::_narrow(obj);
if( CORBA::is_nil(testContext) ) {
cerr << "Failed to narrow naming context." << endl;
return 0;
}
}
// Bind objref with name Echo to the testContext:
CosNaming::Name objectName;
objectName.length(1);
objectName[0].id = (const char*) "Echo"; // string copied
objectName[0].kind = (const char*) "Object"; // string copied
try {
testContext->bind(objectName, objref);
}
catch(CosNaming::NamingContext::AlreadyBound& ex) {
testContext->rebind(objectName, objref);
}
// Note: Using rebind() will overwrite any Object previously bound
// to /test/Echo with obj.
// Alternatively, bind() can be used, which will raise a
// CosNaming::NamingContext::AlreadyBound exception if the name
// supplied is already bound to an object.
// Amendment: When using OrbixNames, it is necessary to first try bind
// and then rebind, as rebind on it's own will throw a NotFoundexception if
// the Name has not already been bound. [This is incorrect behaviour -
// it should just bind].
}
catch(CORBA::TRANSIENT& ex) {
cerr << "Caught system exception TRANSIENT -- unable to contact the "
<< "naming service." << endl
<< "Make sure the naming server is running and that omniORB is "
<< "configured correctly." << endl;
return 0;
}
catch(CORBA::SystemException& ex) {
cerr << "Caught a CORBA::" << ex._name()
<< " while using the naming service." << endl;
return 0;
}
return 1;
}
- 1
- The stub
code is the C++ code that provides the object mapping as defined in
the CORBA specification.
- 2
- In
omniORB, all object reference variable types are instantiated from the
template type _CORBA_ObjRef_Var.
- 3
- However, the implementation
of the type conversion operator between Echo_var and
Echo_ptr varies slightly among different C++ compilers; you
may need to do an explicit cast if the compiler complains about the
conversion being ambiguous.
- 4
- In the previous 1.0 version of the C++
mapping, servant reference counting was optional, chosen by inheriting
from a mixin class named RefCountServantBase. That has been
deprecated in the 1.1 version of the C++ mapping, but the class is
still available as an empty struct, so existing code that inherits
from RefCountServantBase will continue to work.
- 5
- A conversion operator of
CORBA::String_var converts a CORBA::String_var
to a char*.
- 6
- Please refer to the C++
mapping specification for details of the String_var mapping.
- 7
- For backwards compatibility, the ORB identifiers
`omniORB2' and `omniORB3' are also accepted.
- 8
- If a system exception is not caught, the C++
runtime will call the terminate() function. This function is
defaulted to abort the whole process and on some systems will cause a
core file to be produced.
- 9
- Run Time Type
Identification
- 10
- The POA itself
can be activated on demand with an adapter activator.
- 11
- There are escaping rules to cope
with id and kind fields which contain `.' and `/' characters. See
chapter 6 of this manual, and chapter 3 of the CORBA
services specification, as updated for the Interoperable Naming
Service [OMG00].