Previous
How to Generate and Store Public Key Certificates
on Hardware
Generating and storing public key certificates on hardware is similar to generating and storing public key certificates on your system. On hardware, the ikecert certlocal and ikecert certdb commands must identify the hardware. The -T option with the token ID identifies the hardware to the commands.
Before You Begin
The hardware must be configured.
The hardware uses the /usr/lib/libpkcs11.so library unless the pkcs11_path keyword in the /etc/inet/ike/config file points to a different library. The library must be implemented according to the following standard: RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki), that is, a PKCS #11 library.
See How to Configure IKE to Find the Sun Crypto Accelerator 4000 Board for setup instructions.
On the system console, assume the Primary Administrator role or become superuser.
The Primary Administrator role includes the Primary Administrator profile. To create the role and assign the role to a user, see Chapter 2, "Working With the Solaris Management Console (Tasks)," in System Administration Guide: Basic Administration.
Note - Logging in remotely exposes security-critical traffic to eavesdropping. Even if you somehow protect the remote login, the security of the system is reduced to the security of the remote login session.
Generate a self-signed certificate or a certificate request, and specify the token ID.
Choose one of the following options:
Note - The Sun Crypto Accelerator 4000 board supports keys up to 2048 bits for RSA. For DSA, this board supports keys up to 1024 bits.
For a self-signed certificate, use this syntax.
# ikecert certlocal -ks -m 1024 -t rsa-md5 \ > -D "C=US, O=PartyCompany, OU=US-Partym, CN=Partym" \ > -a -T dca0-accel-stor IP=192.168.116.16 Creating hardware private keys. Enter PIN for PKCS#11 token: Type user:password
The argument to the -T option is the token ID from the attached Sun Crypto Accelerator 4000 board.
For a certificate request, use this syntax.
# ikecert certlocal -kc -m 1024 -t rsa-md5 \ > -D "C=US, O=PartyCompany, OU=US-Partym, CN=Partym" \ > -a -T dca0-accel-stor IP=192.168.116.16 Creating hardware private keys. Enter PIN for PKCS#11 token: Type user:password
For a description of the arguments to the ikecert command, see the ikecert(1M) man page.
At the prompt for a PIN, type the Sun Crypto Accelerator 4000 user, a colon, and the user's password.
If the Sun Crypto Accelerator 4000 board has a user ikemgr whose password is rgm4tigt, you would type the following:
Enter PIN for PKCS#11 token: ikemgr:rgm4tigt
Note - The PIN response is stored on disk as clear text.
After you type the password, the certificate prints out:
Enter PIN for PKCS#11 token: ikemgr:rgm4tigt -----BEGIN X509 CERTIFICATE----- MIIBuDCCASECAQAwSTELMAkGA1UEBhMCVVMxFTATBgNVBAoTDFBhcnR5Q29tcGFu ... oKUDBbZ9O/pLWYGr -----END X509 CERTIFICATE-----
Send your certificate for use by the other party.
Choose one of the following options:
Send the self-signed certificate to the remote system.
You can paste the certificate into an email.
Send the certificate request to an organization that handles PKI.
Follow the instructions of the PKI organization to submit the certificate request. For a more detailed discussion, see Step 3 of How to Configure IKE With Certificates Signed by a CA.
On your system, edit the /etc/inet/ike/config file to recognize the certificates.
Choose one of the following options.
Use the values that the administrator of the remote system provides for the cert_trust, remote_id, and remote_addr parameters. For example, on the enigma system, the ike/config file would appear similar to the following:
# Explicitly trust the following self-signed certs # Use the Subject Alternate Name to identify the cert cert_trust "192.168.116.16" Local system's certificate Subject Alt Name cert_trust "192.168.13.213" Remote system's certificate Subject Alt name # Solaris 10 1/06 release: default path does not have to be typed in #pkcs11_path "/usr/lib/libpkcs11.so" Hardware connection # Solaris 10 release: use this path #pkcs11_path "/opt/SUNWconn/cryptov2/lib/libvpkcs11.so" ... { label "JA-enigmax to US-partym" local_id_type dn local_id "C=JA, O=EnigmaCo, OU=JA-Enigmax, CN=Enigmax" remote_id "C=US, O=PartyCompany, OU=US-Partym, CN=Partym" local_addr 192.168.116.16 remote_addr 192.168.13.213 p1_xform {auth_method rsa_sig oakley_group 2 auth_alg md5 encr_alg 3des} }Certificate request
Type the name that the PKI organization provides as the value for the cert_root keyword. For example, the ike/config file on the enigma system might appear similar to the following:
# Trusted root cert # This certificate is from Example PKI # This is the X.509 distinguished name for the CA that it issues. cert_root "C=US, O=ExamplePKI\, Inc., OU=PKI-Example, CN=Example PKI" # Solaris 10 1/06 release: default path does not have to be typed in #pkcs11_path "/usr/lib/libpkcs11.so" Hardware connection # Solaris 10 release: use this path #pkcs11_path "/opt/SUNWconn/cryptov2/lib/libvpkcs11.so" ... { label "JA-enigmax to US-partym - Example PKI" local_id_type dn local_id "C=JA, O=EnigmaCo, OU=JA-Enigmax, CN=Enigmax" remote_id "C=US, O=PartyCompany, OU=US-Partym, CN=Partym" local_addr 192.168.116.16 remote_addr 192.168.13.213 p1_xform {auth_method rsa_sig oakley_group 2 auth_alg md5 encr_alg 3des} }
Place the certificates from the other party in the hardware.
Respond to the PIN request as you responded in Step 3.
Note - You must add the public key certificates to the same attached hardware that generated your private key.
Self-signed certificate.
Add the remote system's self-signed certificate. In this example, the certificate is stored in the file, DCA.ACCEL.STOR.CERT.
# ikecert certdb -a -T dca0-accel-stor < DCA.ACCEL.STOR.CERT Enter PIN for PKCS#11 token: Type user:password
If the self-signed certificate used rsa_encrypt as the value for the auth_method parameter, add the peer's certificate to the hardware store.
Certificates from a PKI organization.
Add the certificate that the organization generated from your certificate request, and add the certificate authority (CA).
# ikecert certdb -a -T dca0-accel-stor < DCA.ACCEL.STOR.CERT Enter PIN for PKCS#11 token: Type user:password
# ikecert certdb -a -T dca0-accel-stor < DCA.ACCEL.STOR.CA.CERT Enter PIN for PKCS#11 token: Type user:password
To add a certificate revocation list (CRL) from the PKI organization, see How to Handle a Certificate Revocation List.