Home · All Classes · Modules

QCursor Class Reference
[QtGui module]

The QCursor class provides a mouse cursor with an arbitrary shape. More...

Methods

Static Methods


Detailed Description

A Qt.CursorShape may be used whenever a QCursor is expected.

The QCursor class provides a mouse cursor with an arbitrary shape.

This class is mainly used to create mouse cursors that are associated with particular widgets and to get and set the position of the mouse cursor.

Qt has a number of standard cursor shapes, but you can also make custom cursor shapes based on a QBitmap, a mask and a hotspot.

To associate a cursor with a widget, use QWidget.setCursor(). To associate a cursor with all widgets (normally for a short period of time), use QApplication.setOverrideCursor().

To set a cursor shape use QCursor.setShape() or use the QCursor constructor which takes the shape as argument, or you can use one of the predefined cursors defined in the Qt.CursorShape enum.

If you want to create a cursor with your own bitmap, either use the QCursor constructor which takes a bitmap and a mask or the constructor which takes a pixmap as arguments.

To set or get the position of the mouse cursor use the static methods QCursor.pos() and QCursor.setPos().

Note: It is possible to create a QCursor before QApplication, but it is not useful except as a place-holder for a real QCursor created after QApplication. Attempting to use a QCursor that was created before QApplication will result in a crash.

A Note for X11 Users

On X11, Qt supports the Xcursor library, which allows for full color icon themes. The table below shows the cursor name used for each Qt.CursorShape value. If a cursor cannot be found using the name shown below, a standard X11 cursor will be used instead. Note: X11 does not provide appropriate cursors for all possible Qt.CursorShape values. It is possible that some cursors will be taken from the Xcursor theme, while others will use an internal bitmap cursor.

Shape Qt.CursorShape Value Cursor Name Shape Qt.CursorShape Value Cursor Name
Qt.ArrowCursor left_ptr Qt.SizeVerCursor size_ver
Qt.UpArrowCursor up_arrow Qt.SizeHorCursor size_hor
Qt.CrossCursor cross Qt.SizeBDiagCursor size_bdiag
Qt.IBeamCursor ibeam Qt.SizeFDiagCursor size_fdiag
Qt.WaitCursor wait Qt.SizeAllCursor size_all
Qt.BusyCursor left_ptr_watch Qt.SplitVCursor split_v
Qt.ForbiddenCursor forbidden Qt.SplitHCursor split_h
Qt.PointingHandCursor pointing_hand Qt.OpenHandCursor openhand
Qt.WhatsThisCursor whats_this Qt.ClosedHandCursor closedhand
Qt.DragMoveCursor dnd-move or move Qt.DragCopyCursor dnd-copy or copy
Qt.DragLinkCursor dnd-link or link

Method Documentation

QCursor.__init__ (self)

Constructs a cursor with the default arrow shape.

QCursor.__init__ (self, QBitmap bitmap, QBitmap mask, int hotX = -1, int hotY = -1)

Constructs a cursor with the specified shape.

See Qt.CursorShape for a list of shapes.

See also setShape().

QCursor.__init__ (self, QPixmap pixmap, int hotX = -1, int hotY = -1)

Constructs a custom bitmap cursor.

bitmap and mask make up the bitmap. hotX and hotY define the cursor's hot spot.

If hotX is negative, it is set to the bitmap().width()/2. If hotY is negative, it is set to the bitmap().height()/2.

The cursor bitmap (B) and mask (M) bits are combined like this:

Use the global Qt color Qt.color0 to draw 0-pixels and Qt.color1 to draw 1-pixels in the bitmaps.

Valid cursor sizes depend on the display hardware (or the underlying window system). We recommend using 32 x 32 cursors, because this size is supported on all platforms. Some platforms also support 16 x 16, 48 x 48, and 64 x 64 cursors.

Note: On Windows CE, the cursor size is fixed. If the pixmap is bigger than the system size, it will be scaled.

See also QBitmap.QBitmap() and QBitmap.setMask().

QCursor.__init__ (self, QCursor cursor)

Constructs a custom pixmap cursor.

pixmap is the image. It is usual to give it a mask (set using QPixmap.setMask()). hotX and hotY define the cursor's hot spot.

If hotX is negative, it is set to the pixmap().width()/2. If hotY is negative, it is set to the pixmap().height()/2.

Valid cursor sizes depend on the display hardware (or the underlying window system). We recommend using 32 x 32 cursors, because this size is supported on all platforms. Some platforms also support 16 x 16, 48 x 48, and 64 x 64 cursors.

Note: On Windows CE, the cursor size is fixed. If the pixmap is bigger than the system size, it will be scaled.

See also QPixmap.QPixmap() and QPixmap.setMask().

QCursor.__init__ (self, QVariant variant)

Constructs a copy of the cursor c.

QBitmap QCursor.bitmap (self)

Returns the cursor bitmap, or 0 if it is one of the standard cursors.

QPoint QCursor.hotSpot (self)

Returns the cursor hot spot, or (0, 0) if it is one of the standard cursors.

QBitmap QCursor.mask (self)

Returns the cursor bitmap mask, or 0 if it is one of the standard cursors.

QPixmap QCursor.pixmap (self)

Returns the cursor pixmap. This is only valid if the cursor is a pixmap cursor.

QPoint QCursor.pos ()

Returns the position of the cursor (hot spot) in global screen coordinates.

You can call QWidget.mapFromGlobal() to translate it to widget coordinates.

See also setPos(), QWidget.mapFromGlobal(), and QWidget.mapToGlobal().

QCursor.setPos (int x, int y)

Moves the cursor (hot spot) to the global screen position (x, y).

You can call QWidget.mapToGlobal() to translate widget coordinates to global screen coordinates.

See also pos(), QWidget.mapFromGlobal(), and QWidget.mapToGlobal().

QCursor.setPos (QPoint p)

This is an overloaded function.

Moves the cursor (hot spot) to the global screen position at point p.

QCursor.setShape (self, Qt.CursorShape newShape)

Sets the cursor to the shape identified by shape.

See Qt.CursorShape for the list of cursor shapes.

See also shape().

Qt.CursorShape QCursor.shape (self)

Returns the cursor shape identifier. The return value is one of the Qt.CursorShape enum values (cast to an int).

See also setShape().


PyQt 4.12.1 for X11Copyright © Riverbank Computing Ltd and The Qt Company 2015Qt 4.8.7