Home · All Classes · Main Classes · Grouped Classes · Modules · Functions

QTimeLine Class Reference
[QtCore module]

The QTimeLine class provides a timeline for controlling animations. More...

 #include <QTimeLine>

Inherits QObject.

This class was introduced in Qt 4.2.

Public Types

Properties

Public Functions

Public Slots

Signals

Additional Inherited Members


Detailed Description

The QTimeLine class provides a timeline for controlling animations.

It's most commonly used to animate a GUI control by calling a slot periodically. You can construct a timeline by passing its duration in milliseconds to QTimeLine's constructor. The timeline's duration describes for how long the animation will run. Then you set a suitable frame range by calling setFrameRange(). Finally connect the frameChanged() signal to a suitable slot in the widget you wish to animate (e.g., setValue() in QProgressBar). When you proceed to calling start(), QTimeLine will enter Running state, and start emitting frameChanged() at regular intervals, causing your widget's connected property's value to grow from the lower end to the upper and of your frame range, at a steady rate. You can specify the update interval by calling setUpdateInterval(). When done, QTimeLine enters NotRunning state, and emits finished().

Example:

 ...
 progressBar = new QProgressBar(this);
 progressBar->setRange(0, 100);

 // Construct a 1-second timeline with a frame range of 0 - 100
 QTimeLine *timeLine = new QTimeLine(1000, this);
 timeLine->setFrameRange(0, 100);
 connect(timeLine, SIGNAL(frameChanged(int)), progressBar, SLOT(setValue(int)));

 // Clicking the push button will start the progress bar animation
 pushButton = new QPushButton(tr("Start animation"), this);
 connect(pushButton, SIGNAL(clicked()), timeLine, SLOT(start()));
 ...

You can also use QTimeLine with the Graphics View framework for animations. The QGraphicsItemAnimation class implements animation of QGraphicsItems with a timeline.

By default the timeline runs once, from the beginning and towards the end, upon which you must call start() again to restart from the beginning. To make the timeline loop, you can call setLoopCount(), passing the number of times the timeline should run before finishing. The direction can also be changed, causing the timeline to run backward, by calling setDirection(). You can also pause and unpause the timeline while it's running by calling setPaused(). For interactive control, the setCurrentTime() function is provided, which sets the time position of the time line directly. Although most useful in NotRunning state, (e.g., connected to a valueChanged() signal in a QSlider,) this function can be called at any time.

The frame interface is useful for standard widgets, but QTimeLine can be used to control any type of animation. The heart of QTimeLine lies in the valueForTime() function, which generates a value between 0 and 1 for a given time. This value is typically used to describe the steps of an animation, where 0 is the first step of an animation, and 1 is the last step. When running, QTimeLine generates values between 0 and 1 by calling valueForTime() and emitting valueChanged(). By default, valueForTime() applies an interpolation algorithm to generate these value. You can choose from a set of predefined timeline algorithms by calling setCurveShape(). By default, QTimeLine uses the EaseInOut curve shape, which provides a value that grows slowly, then grows steadily, and finally grows slowly. For a custom timeline, you can reimplement valueForTime(), in which case QTimeLine's curveShape property is ignored.

See also QProgressBar, QProgressDialog, and QGraphicsItemAnimation.


Member Type Documentation

enum QTimeLine::CurveShape

This enum describes the default shape of QTimeLine's value curve. The default, shape is EaseInOutCurve. The curve defines the relation between the value and the timeline.

ConstantValueDescription
QTimeLine::EaseInCurve0The value starts growing slowly, then increases in speed.
QTimeLine::EaseOutCurve1The value starts growing steadily, then ends slowly.
QTimeLine::EaseInOutCurve2The value starts growing slowly, the runs steadily, then grows slowly again.
QTimeLine::LinearCurve3The value grows linearly (e.g., if the duration is 1000 ms, the value at time 500 ms is 0.5).
QTimeLine::SineCurve4The value grows sinusoidally.

See also setCurveShape().

enum QTimeLine::Direction

This enum describes the direction of the timeline when in Running state.

ConstantValueDescription
QTimeLine::Forward0The current time of the timeline increases with time (i.e., moves from 0 and towards the end / duration).
QTimeLine::Backward1The current time of the timeline decreases with time (i.e., moves from the end / duration and towards 0).

See also setDirection().

enum QTimeLine::State

This enum describes the state of the timeline.

ConstantValueDescription
QTimeLine::NotRunning0The timeline is not running. This is the initial state of QTimeLine, and the state QTimeLine reenters when finished. The current time, frame and value remain unchanged until either setCurrentTime() is called, or the timeline is started by calling start().
QTimeLine::Paused1The timeline is paused (i.e., temporarily suspended). Calling setPaused(false) will resume timeline activity.
QTimeLine::Running2The timeline is running. While control is in the event loop, QTimeLine will update its current time at regular intervals, emitting valueChanged() and frameChanged() when appropriate.

See also state() and stateChanged().


Property Documentation

currentTime : int

This property holds the current time of the time line.

When QTimeLine is in Running state, this value is updated continuously as a function of the duration and direction of the timeline. Otherwise, it is value that was current when stop() was called last, or the value set by setCurrentTime().

Access functions:

curveShape : CurveShape

This property holds the shape of the timeline curve.

The curve shape describes the relation between the time and value for the base implementation of valueForTime().

If you have reimplemented valueForTime(), this value is ignored.

Access functions:

See also valueForTime().

direction : Direction

This property holds the direction of the timeline when QTimeLine is in Running state.

This direction indicates whether the time moves from 0 towards the timeline duration, or from the value of the duration and towards 0 after start() has been called.

Access functions:

duration : int

This property holds the total duration of the timeline in milliseconds.

By default, this value is 1000 (i.e., 1 second), but you can change this by either passing a duration to QTimeLine's constructor, or by calling setDuration(). The duration must be larger than 0.

Access functions:

loopCount : int

This property holds the number of times the timeline should loop before it's finished.

A loop count of of 0 means that the timeline will loop forever.

Access functions:

updateInterval : int

This property holds the time in milliseconds between each time QTimeLine updates its current time.

When updating the current time, QTimeLine will emit valueChanged() if the current value changed, and frameChanged() if the frame changed.

By default, the interval is 40 ms, which corresponds to a rate of 25 updates per second.

Access functions:


Member Function Documentation

QTimeLine::QTimeLine ( int duration = 1000, QObject * parent = 0 )

Constructs a timeline with a duration of duration milliseconds. parent is passed to QObject's constructor. The default duration is 1000 milliseconds.

QTimeLine::~QTimeLine ()   [virtual]

Destroys the timeline.

int QTimeLine::currentFrame () const

Returns the frame corresponding to the current time.

See also currentTime(), frameForTime(), and setFrameRange().

qreal QTimeLine::currentValue () const

Returns the value corresponding to the current time.

See also valueForTime() and currentFrame().

int QTimeLine::endFrame () const

Returns the end frame, which is the frame corresponding to the end of the timeline (i.e., the frame for which the current value is 1).

See also setEndFrame() and setFrameRange().

void QTimeLine::finished ()   [signal]

This signal is emitted when QTimeLine finishes (i.e., reaches the end of its time line), and does not loop.

void QTimeLine::frameChanged ( int frame )   [signal]

QTimeLine emits this signal at regular intervals when in Running state, but only if the current frame changes. frame is the current frame number.

See also QTimeLine::setFrameRange() and QTimeLine::updateInterval.

int QTimeLine::frameForTime ( int msec ) const

Returns the frame corresponding to the time msec. This value is calculated using a linear interpolation of the start and end frame, based on the value returned by valueForTime().

See also valueForTime() and setFrameRange().

void QTimeLine::resume ()   [slot]

Resumes the timeline from the current time. QTimeLine will reenter Running state, and once it enters the event loop, it will update its current time, frame and value at regular intervals.

In contrast to start(), this function does not restart the timeline before is resumes.

See also start(), updateInterval(), frameChanged(), and valueChanged().

void QTimeLine::setEndFrame ( int frame )

Sets the end frame, which is the frame corresponding to the end of the timeline (i.e., the frame for which the current value is 1), to frame.

See also endFrame(), startFrame(), and setFrameRange().

void QTimeLine::setFrameRange ( int startFrame, int endFrame )

Sets the timeline's frame counter to start at startFrame, and end and endFrame. For each time value, QTimeLine will find the corresponding frame when you call currentFrame() or frameForTime() by interpolating, using the return value of valueForTime().

When in Running state, QTimeLine also emits the frameChanged() signal when the frame changes.

See also startFrame(), endFrame(), start(), and currentFrame().

void QTimeLine::setPaused ( bool paused )   [slot]

If paused is true, the timeline is paused, causing QTimeLine to enter Paused state. No updates will be signaled until either start() or setPaused(false) is called. If paused is false, the timeline is resumed and continues where it left.

See also state() and start().

void QTimeLine::setStartFrame ( int frame )

Sets the start frame, which is the frame corresponding to the start of the timeline (i.e., the frame for which the current value is 0), to frame.

See also startFrame(), endFrame(), and setFrameRange().

void QTimeLine::start ()   [slot]

Starts or restarts the timeline. QTimeLine will enter Running state, and once it enters the event loop, it will update its current time, frame and value at regular intervals. The default interval is 40 ms (i.e., 25 times per second). You can change the update interval by calling setUpdateInterval().

If you want to resume a stopped timeline without restarting, you can call resume() instead.

See also resume(), updateInterval(), frameChanged(), and valueChanged().

int QTimeLine::startFrame () const

Returns the start frame, which is the frame corresponding to the start of the timeline (i.e., the frame for which the current value is 0).

See also setStartFrame() and setFrameRange().

State QTimeLine::state () const

Returns the state of the timeline.

See also start(), setPaused(), and stop().

void QTimeLine::stateChanged ( QTimeLine::State newState )   [signal]

This signal is emitted whenever QTimeLine's state changes. The new state is newState.

void QTimeLine::stop ()   [slot]

Stops the timeline, causing QTimeLine to enter NotRunning state.

See also start().

void QTimeLine::toggleDirection ()   [slot]

Toggles the direction of the timeline. If the direction was Forward, it becomes Backward, and vice verca.

See also setDirection().

void QTimeLine::valueChanged ( qreal value )   [signal]

QTimeLine emits this signal at regular intervals when in Running state, but only if the current value changes. value is the current value. value is a number between 0.0 and 1.0

See also QTimeLine::setDuration(), QTimeLine::valueForTime(), and QTimeLine::updateInterval.

qreal QTimeLine::valueForTime ( int msec ) const   [virtual]

Returns the timeline value for the time msec. The returned value, which varies depending on the curve shape, is always between 0 and 1. If msec is 0, the default implementation always returns 0.

Reimplement this function to provide a custom curve shape for your timeline.

See also CurveShape and frameForTime().


Copyright © 2008 Trolltech Trademarks
Qt 4.3.5