QNetworkRequest Class

The QNetworkRequest class holds a request to be sent with QNetworkAccessManager. More...

Header: #include <QNetworkRequest>
qmake: QT += network
Since: Qt 4.4

Public Types

enum Attribute { HttpStatusCodeAttribute, HttpReasonPhraseAttribute, RedirectionTargetAttribute, ConnectionEncryptedAttribute, ..., UserMax }
enum CacheLoadControl { AlwaysNetwork, PreferNetwork, PreferCache, AlwaysCache }
enum KnownHeaders { ContentDispositionHeader, ContentTypeHeader, ContentLengthHeader, LocationHeader, ..., ServerHeader }
enum LoadControl { Automatic, Manual }
enum Priority { HighPriority, NormalPriority, LowPriority }

Public Functions

QNetworkRequest(const QUrl & url = QUrl())
QNetworkRequest(const QNetworkRequest & other)
~QNetworkRequest()
QVariant attribute(Attribute code, const QVariant & defaultValue = QVariant()) const
bool hasRawHeader(const QByteArray & headerName) const
QVariant header(KnownHeaders header) const
QObject * originatingObject() const
Priority priority() const
QByteArray rawHeader(const QByteArray & headerName) const
QList<QByteArray> rawHeaderList() const
void setAttribute(Attribute code, const QVariant & value)
void setHeader(KnownHeaders header, const QVariant & value)
void setOriginatingObject(QObject * object)
void setPriority(Priority priority)
void setRawHeader(const QByteArray & headerName, const QByteArray & headerValue)
void setSslConfiguration(const QSslConfiguration & config)
void setUrl(const QUrl & url)
QSslConfiguration sslConfiguration() const
void swap(QNetworkRequest & other)
QUrl url() const
bool operator!=(const QNetworkRequest & other) const
QNetworkRequest & operator=(const QNetworkRequest & other)
bool operator==(const QNetworkRequest & other) const

Detailed Description

The QNetworkRequest class holds a request to be sent with QNetworkAccessManager.

QNetworkRequest is part of the Network Access API and is the class holding the information necessary to send a request over the network. It contains a URL and some ancillary information that can be used to modify the request.

See also QNetworkReply and QNetworkAccessManager.

Member Type Documentation

enum QNetworkRequest::​Attribute

Attribute codes for the QNetworkRequest and QNetworkReply.

Attributes are extra meta-data that are used to control the behavior of the request and to pass further information from the reply back to the application. Attributes are also extensible, allowing custom implementations to pass custom values.

The following table explains what the default attribute codes are, the QVariant types associated, the default value if said attribute is missing and whether it's used in requests or replies.

ConstantValueDescription
QNetworkRequest::HttpStatusCodeAttribute0Replies only, type: QMetaType::Int (no default) Indicates the HTTP status code received from the HTTP server (like 200, 304, 404, 401, etc.). If the connection was not HTTP-based, this attribute will not be present.
QNetworkRequest::HttpReasonPhraseAttribute1Replies only, type: QMetaType::QByteArray (no default) Indicates the HTTP reason phrase as received from the HTTP server (like "Ok", "Found", "Not Found", "Access Denied", etc.) This is the human-readable representation of the status code (see above). If the connection was not HTTP-based, this attribute will not be present.
QNetworkRequest::RedirectionTargetAttribute2Replies only, type: QMetaType::QUrl (no default) If present, it indicates that the server is redirecting the request to a different URL. The Network Access API does not by default follow redirections: it's up to the application to determine if the requested redirection should be allowed, according to its security policies. The returned URL might be relative. Use QUrl::resolved() to create an absolute URL out of it.
QNetworkRequest::ConnectionEncryptedAttribute3Replies only, type: QMetaType::Bool (default: false) Indicates whether the data was obtained through an encrypted (secure) connection.
QNetworkRequest::CacheLoadControlAttribute4Requests only, type: QMetaType::Int (default: QNetworkRequest::PreferNetwork) Controls how the cache should be accessed. The possible values are those of QNetworkRequest::CacheLoadControl. Note that the default QNetworkAccessManager implementation does not support caching. However, this attribute may be used by certain backends to modify their requests (for example, for caching proxies).
QNetworkRequest::CacheSaveControlAttribute5Requests only, type: QMetaType::Bool (default: true) Controls if the data obtained should be saved to cache for future uses. If the value is false, the data obtained will not be automatically cached. If true, data may be cached, provided it is cacheable (what is cacheable depends on the protocol being used).
QNetworkRequest::SourceIsFromCacheAttribute6Replies only, type: QMetaType::Bool (default: false) Indicates whether the data was obtained from cache or not.
QNetworkRequest::DoNotBufferUploadDataAttribute7Requests only, type: QMetaType::Bool (default: false) Indicates whether the QNetworkAccessManager code is allowed to buffer the upload data, e.g. when doing a HTTP POST. When using this flag with sequential upload data, the ContentLengthHeader header must be set.
QNetworkRequest::HttpPipeliningAllowedAttribute8Requests only, type: QMetaType::Bool (default: false) Indicates whether the QNetworkAccessManager code is allowed to use HTTP pipelining with this request.
QNetworkRequest::HttpPipeliningWasUsedAttribute9Replies only, type: QMetaType::Bool Indicates whether the HTTP pipelining was used for receiving this reply.
QNetworkRequest::CustomVerbAttribute10Requests only, type: QMetaType::QByteArray Holds the value for the custom HTTP verb to send (destined for usage of other verbs than GET, POST, PUT and DELETE). This verb is set when calling QNetworkAccessManager::sendCustomRequest().
QNetworkRequest::CookieLoadControlAttribute11Requests only, type: QMetaType::Int (default: QNetworkRequest::Automatic) Indicates whether to send 'Cookie' headers in the request. This attribute is set to false by Qt WebKit when creating a cross-origin XMLHttpRequest where withCredentials has not been set explicitly to true by the Javascript that created the request. See here for more information. (This value was introduced in 4.7.)
QNetworkRequest::CookieSaveControlAttribute13Requests only, type: QMetaType::Int (default: QNetworkRequest::Automatic) Indicates whether to save 'Cookie' headers received from the server in reply to the request. This attribute is set to false by Qt WebKit when creating a cross-origin XMLHttpRequest where withCredentials has not been set explicitly to true by the Javascript that created the request. See here for more information. (This value was introduced in 4.7.)
QNetworkRequest::AuthenticationReuseAttribute12Requests only, type: QMetaType::Int (default: QNetworkRequest::Automatic) Indicates whether to use cached authorization credentials in the request, if available. If this is set to QNetworkRequest::Manual and the authentication mechanism is 'Basic' or 'Digest', Qt will not send an an 'Authorization' HTTP header with any cached credentials it may have for the request's URL. This attribute is set to QNetworkRequest::Manual by Qt WebKit when creating a cross-origin XMLHttpRequest where withCredentials has not been set explicitly to true by the Javascript that created the request. See here for more information. (This value was introduced in 4.7.)
QNetworkRequest::BackgroundRequestAttribute17Type: QMetaType::Bool (default: false) Indicates that this is a background transfer, rather than a user initiated transfer. Depending on the platform, background transfers may be subject to different policies. The QNetworkSession ConnectInBackground property will be set according to this attribute.
QNetworkRequest::SpdyAllowedAttribute18Requests only, type: QMetaType::Bool (default: false) Indicates whether the QNetworkAccessManager code is allowed to use SPDY with this request. This applies only to SSL requests, and depends on the server supporting SPDY.
QNetworkRequest::SpdyWasUsedAttribute19Replies only, type: QMetaType::Bool Indicates whether SPDY was used for receiving this reply.
QNetworkRequest::User1000Special type. Additional information can be passed in QVariants with types ranging from User to UserMax. The default implementation of Network Access will ignore any request attributes in this range and it will not produce any attributes in this range in replies. The range is reserved for extensions of QNetworkAccessManager.
QNetworkRequest::UserMax32767Special type. See User.

This enum was introduced or modified in Qt 4.7.

enum QNetworkRequest::​CacheLoadControl

Controls the caching mechanism of QNetworkAccessManager.

ConstantValueDescription
QNetworkRequest::AlwaysNetwork0always load from network and do not check if the cache has a valid entry (similar to the "Reload" feature in browsers); in addition, force intermediate caches to re-validate.
QNetworkRequest::PreferNetwork1default value; load from the network if the cached entry is older than the network entry. This will never return stale data from the cache, but revalidate resources that have become stale.
QNetworkRequest::PreferCache2load from cache if available, otherwise load from network. Note that this can return possibly stale (but not expired) items from cache.
QNetworkRequest::AlwaysCache3only load from cache, indicating error if the item was not cached (i.e., off-line mode)

enum QNetworkRequest::​KnownHeaders

List of known header types that QNetworkRequest parses. Each known header is also represented in raw form with its full HTTP name.

ConstantValueDescription
QNetworkRequest::ContentDispositionHeader6Corresponds to the HTTP Content-Disposition header and contains a string containing the disposition type (for instance, attachment) and a parameter (for instance, filename).
QNetworkRequest::ContentTypeHeader0Corresponds to the HTTP Content-Type header and contains a string containing the media (MIME) type and any auxiliary data (for instance, charset).
QNetworkRequest::ContentLengthHeader1Corresponds to the HTTP Content-Length header and contains the length in bytes of the data transmitted.
QNetworkRequest::LocationHeader2Corresponds to the HTTP Location header and contains a URL representing the actual location of the data, including the destination URL in case of redirections.
QNetworkRequest::LastModifiedHeader3Corresponds to the HTTP Last-Modified header and contains a QDateTime representing the last modification date of the contents.
QNetworkRequest::CookieHeader4Corresponds to the HTTP Cookie header and contains a QList<QNetworkCookie> representing the cookies to be sent back to the server.
QNetworkRequest::SetCookieHeader5Corresponds to the HTTP Set-Cookie header and contains a QList<QNetworkCookie> representing the cookies sent by the server to be stored locally.
QNetworkRequest::UserAgentHeader7The User-Agent header sent by HTTP clients.
QNetworkRequest::ServerHeader8The Server header received by HTTP clients.

See also header(), setHeader(), rawHeader(), and setRawHeader().

enum QNetworkRequest::​LoadControl

Indicates if an aspect of the request's loading mechanism has been manually overridden, e.g. by Qt WebKit.

ConstantValueDescription
QNetworkRequest::Automatic0default value: indicates default behaviour.
QNetworkRequest::Manual1indicates behaviour has been manually overridden.

This enum was introduced or modified in Qt 4.7.

enum QNetworkRequest::​Priority

This enum lists the possible network request priorities.

ConstantValueDescription
QNetworkRequest::HighPriority1High priority
QNetworkRequest::NormalPriority3Normal priority
QNetworkRequest::LowPriority5Low priority

This enum was introduced or modified in Qt 4.7.

Member Function Documentation

QNetworkRequest::​QNetworkRequest(const QUrl & url = QUrl())

Constructs a QNetworkRequest object with url as the URL to be requested.

See also url() and setUrl().

QNetworkRequest::​QNetworkRequest(const QNetworkRequest & other)

Creates a copy of other.

QNetworkRequest::​~QNetworkRequest()

Disposes of the QNetworkRequest object.

QVariant QNetworkRequest::​attribute(Attribute code, const QVariant & defaultValue = QVariant()) const

Returns the attribute associated with the code code. If the attribute has not been set, it returns defaultValue.

Note: This function does not apply the defaults listed in QNetworkRequest::Attribute.

See also setAttribute() and QNetworkRequest::Attribute.

bool QNetworkRequest::​hasRawHeader(const QByteArray & headerName) const

Returns true if the raw header headerName is present in this network request.

See also rawHeader() and setRawHeader().

Returns the value of the known network header header if it is present in this request. If it is not present, returns QVariant() (i.e., an invalid variant).

See also KnownHeaders, rawHeader(), and setHeader().

QObject * QNetworkRequest::​originatingObject() const

Returns a reference to the object that initiated this network request; returns 0 if not set or the object has been destroyed.

This function was introduced in Qt 4.6.

See also setOriginatingObject().

Priority QNetworkRequest::​priority() const

Return the priority of this request.

This function was introduced in Qt 4.7.

See also setPriority().

QByteArray QNetworkRequest::​rawHeader(const QByteArray & headerName) const

Returns the raw form of header headerName. If no such header is present, an empty QByteArray is returned, which may be indistinguishable from a header that is present but has no content (use hasRawHeader() to find out if the header exists or not).

Raw headers can be set with setRawHeader() or with setHeader().

See also header() and setRawHeader().

QList<QByteArray> QNetworkRequest::​rawHeaderList() const

Returns a list of all raw headers that are set in this network request. The list is in the order that the headers were set.

See also hasRawHeader() and rawHeader().

void QNetworkRequest::​setAttribute(Attribute code, const QVariant & value)

Sets the attribute associated with code code to be value value. If the attribute is already set, the previous value is discarded. In special, if value is an invalid QVariant, the attribute is unset.

See also attribute() and QNetworkRequest::Attribute.

void QNetworkRequest::​setHeader(KnownHeaders header, const QVariant & value)

Sets the value of the known header header to be value, overriding any previously set headers. This operation also sets the equivalent raw HTTP header.

See also KnownHeaders, setRawHeader(), and header().

void QNetworkRequest::​setOriginatingObject(QObject * object)

Allows setting a reference to the object initiating the request.

For example Qt WebKit sets the originating object to the QWebFrame that initiated the request.

This function was introduced in Qt 4.6.

See also originatingObject().

void QNetworkRequest::​setPriority(Priority priority)

Set the priority of this request to priority.

Note: The priority is only a hint to the network access manager. It can use it or not. Currently it is used for HTTP to decide which request should be sent first to a server.

This function was introduced in Qt 4.7.

See also priority().

void QNetworkRequest::​setRawHeader(const QByteArray & headerName, const QByteArray & headerValue)

Sets the header headerName to be of value headerValue. If headerName corresponds to a known header (see QNetworkRequest::KnownHeaders), the raw format will be parsed and the corresponding "cooked" header will be set as well.

For example:

request.setRawHeader(QByteArray("Last-Modified"), QByteArray("Sun, 06 Nov 1994 08:49:37 GMT"));

will also set the known header LastModifiedHeader to be the QDateTime object of the parsed date.

Note: Setting the same header twice overrides the previous setting. To accomplish the behaviour of multiple HTTP headers of the same name, you should concatenate the two values, separating them with a comma (",") and set one single raw header.

See also KnownHeaders, setHeader(), hasRawHeader(), and rawHeader().

void QNetworkRequest::​setSslConfiguration(const QSslConfiguration & config)

Sets this network request's SSL configuration to be config. The settings that apply are the private key, the local certificate, the SSL protocol (SSLv2, SSLv3, TLSv1.0 where applicable), the CA certificates and the ciphers that the SSL backend is allowed to use.

By default, no SSL configuration is set, which allows the backends to choose freely what configuration is best for them.

See also sslConfiguration() and QSslConfiguration::defaultConfiguration().

void QNetworkRequest::​setUrl(const QUrl & url)

Sets the URL this network request is referring to be url.

See also url().

QSslConfiguration QNetworkRequest::​sslConfiguration() const

Returns this network request's SSL configuration. By default, no SSL settings are specified.

See also setSslConfiguration().

void QNetworkRequest::​swap(QNetworkRequest & other)

Swaps this network request with other. This function is very fast and never fails.

This function was introduced in Qt 5.0.

QUrl QNetworkRequest::​url() const

Returns the URL this network request is referring to.

See also setUrl().

bool QNetworkRequest::​operator!=(const QNetworkRequest & other) const

Returns false if this object is not the same as other.

See also operator==().

QNetworkRequest & QNetworkRequest::​operator=(const QNetworkRequest & other)

Creates a copy of other

bool QNetworkRequest::​operator==(const QNetworkRequest & other) const

Returns true if this object is the same as other (i.e., if they have the same URL, same headers and same meta-data settings).

See also operator!=().

© 2015 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.