QProcess Class

The QProcess class is used to start external programs and to communicate with them. More...

Header: #include <QProcess>
qmake: QT += core
Inherits: QIODevice.

Note: All functions in this class are reentrant.

Public Types

enum ExitStatus { NormalExit, CrashExit }
enum InputChannelMode { ManagedInputChannel, ForwardedInputChannel }
enum ProcessChannel { StandardOutput, StandardError }
enum ProcessChannelMode { SeparateChannels, MergedChannels, ForwardedChannels, ForwardedErrorChannel, ForwardedOutputChannel }
enum ProcessError { FailedToStart, Crashed, Timedout, WriteError, ReadError, UnknownError }
enum ProcessState { NotRunning, Starting, Running }

Public Functions

QProcess(QObject * parent = 0)
virtual ~QProcess()
QStringList arguments() const
void closeReadChannel(ProcessChannel channel)
void closeWriteChannel()
QProcess::ProcessError error() const
int exitCode() const
QProcess::ExitStatus exitStatus() const
InputChannelMode inputChannelMode() const
QString nativeArguments() const
ProcessChannelMode processChannelMode() const
QProcessEnvironment processEnvironment() const
qint64 processId() const
QString program() const
QByteArray readAllStandardError()
QByteArray readAllStandardOutput()
ProcessChannel readChannel() const
void setArguments(const QStringList & arguments)
void setInputChannelMode(InputChannelMode mode)
void setNativeArguments(const QString & arguments)
void setProcessChannelMode(ProcessChannelMode mode)
void setProcessEnvironment(const QProcessEnvironment & environment)
void setProgram(const QString & program)
void setReadChannel(ProcessChannel channel)
void setStandardErrorFile(const QString & fileName, OpenMode mode = Truncate)
void setStandardInputFile(const QString & fileName)
void setStandardOutputFile(const QString & fileName, OpenMode mode = Truncate)
void setStandardOutputProcess(QProcess * destination)
void setWorkingDirectory(const QString & dir)
void start(const QString & program, const QStringList & arguments, OpenMode mode = ReadWrite)
void start(OpenMode mode = ReadWrite)
void start(const QString & command, OpenMode mode = ReadWrite)
QProcess::ProcessState state() const
bool waitForFinished(int msecs = 30000)
bool waitForStarted(int msecs = 30000)
QString workingDirectory() const

Reimplemented Public Functions

virtual bool atEnd() const
virtual qint64 bytesAvailable() const
virtual qint64 bytesToWrite() const
virtual bool canReadLine() const
virtual void close()
virtual bool isSequential() const
virtual bool open(OpenMode mode = ReadWrite)
virtual bool waitForBytesWritten(int msecs = 30000)
virtual bool waitForReadyRead(int msecs = 30000)
  • 33 public functions inherited from QIODevice
  • 31 public functions inherited from QObject

Public Slots

void kill()
void terminate()
  • 1 public slot inherited from QObject

Signals

void error(QProcess::ProcessError error)
void finished(int exitCode, QProcess::ExitStatus exitStatus)
void readyReadStandardError()
void readyReadStandardOutput()
void started()
void stateChanged(QProcess::ProcessState newState)

Static Public Members

int execute(const QString & program, const QStringList & arguments)
int execute(const QString & command)
QString nullDevice()
bool startDetached(const QString & program, const QStringList & arguments, const QString & workingDirectory = QString(), qint64 * pid = 0)
bool startDetached(const QString & command)
QStringList systemEnvironment()
  • 11 static public members inherited from QObject

Protected Functions

void setProcessState(ProcessState state)
virtual void setupChildProcess()

Reimplemented Protected Functions

virtual qint64 readData(char * data, qint64 maxlen)
virtual qint64 writeData(const char * data, qint64 len)
  • 5 protected functions inherited from QIODevice
  • 9 protected functions inherited from QObject
typedef Q_PID

Additional Inherited Members

  • 1 property inherited from QObject

Detailed Description

The QProcess class is used to start external programs and to communicate with them.

Running a Process

To start a process, pass the name and command line arguments of the program you want to run as arguments to start(). Arguments are supplied as individual strings in a QStringList.

Alternatively, you can set the program to run with setProgram() and setArguments(), and then call start() or open().

For example, the following code snippet runs the analog clock example in the Fusion style on X11 platforms by passing strings containing "-style" and "fusion" as two items in the list of arguments:

    QObject *parent;
    ...
    QString program = "./path/to/Qt/examples/widgets/analogclock";
    QStringList arguments;
    arguments << "-style" << "fusion";

    QProcess *myProcess = new QProcess(parent);
    myProcess->start(program, arguments);

QProcess then enters the Starting state, and when the program has started, QProcess enters the Running state and emits started().

QProcess allows you to treat a process as a sequential I/O device. You can write to and read from the process just as you would access a network connection using QTcpSocket. You can then write to the process's standard input by calling write(), and read the standard output by calling read(), readLine(), and getChar(). Because it inherits QIODevice, QProcess can also be used as an input source for QXmlReader, or for generating data to be uploaded using QNetworkAccessManager.

Note: On Windows CE, reading and writing to a process is not supported.

When the process exits, QProcess reenters the NotRunning state (the initial state), and emits finished().

The finished() signal provides the exit code and exit status of the process as arguments, and you can also call exitCode() to obtain the exit code of the last process that finished, and exitStatus() to obtain its exit status. If an error occurs at any point in time, QProcess will emit the error() signal. You can also call error() to find the type of error that occurred last, and state() to find the current process state.

Communicating via Channels

Processes have two predefined output channels: The standard output channel (stdout) supplies regular console output, and the standard error channel (stderr) usually supplies the errors that are printed by the process. These channels represent two separate streams of data. You can toggle between them by calling setReadChannel(). QProcess emits readyRead() when data is available on the current read channel. It also emits readyReadStandardOutput() when new standard output data is available, and when new standard error data is available, readyReadStandardError() is emitted. Instead of calling read(), readLine(), or getChar(), you can explicitly read all data from either of the two channels by calling readAllStandardOutput() or readAllStandardError().

The terminology for the channels can be misleading. Be aware that the process's output channels correspond to QProcess's read channels, whereas the process's input channels correspond to QProcess's write channels. This is because what we read using QProcess is the process's output, and what we write becomes the process's input.

QProcess can merge the two output channels, so that standard output and standard error data from the running process both use the standard output channel. Call setProcessChannelMode() with MergedChannels before starting the process to activative this feature. You also have the option of forwarding the output of the running process to the calling, main process, by passing ForwardedChannels as the argument. It is also possible to forward only one of the output channels - typically one would use ForwardedErrorChannel, but ForwardedOutputChannel also exists. Note that using channel forwarding is typically a bad idea in GUI applications - you should present errors graphically instead.

Certain processes need special environment settings in order to operate. You can set environment variables for your process by calling setEnvironment(). To set a working directory, call setWorkingDirectory(). By default, processes are run in the current working directory of the calling process.

The positioning and the screen Z-order of windows belonging to GUI applications started with QProcess are controlled by the underlying windowing system. For Qt 5 applications, the positioning can be specified using the -qwindowgeometry command line option; X11 applications generally accept a -geometry command line option.

Note: On QNX, setting the working directory may cause all application threads, with the exception of the QProcess caller thread, to temporarily freeze during the spawning process, owing to a limitation in the operating system.

Synchronous Process API

QProcess provides a set of functions which allow it to be used without an event loop, by suspending the calling thread until certain signals are emitted:

Calling these functions from the main thread (the thread that calls QApplication::exec()) may cause your user interface to freeze.

The following example runs gzip to compress the string "Qt rocks!", without an event loop:

    QProcess gzip;
    gzip.start("gzip", QStringList() << "-c");
    if (!gzip.waitForStarted())
        return false;

    gzip.write("Qt rocks!");
    gzip.closeWriteChannel();

    if (!gzip.waitForFinished())
        return false;

    QByteArray result = gzip.readAll();

Notes for Windows Users

Some Windows commands (for example, dir) are not provided by separate applications, but by the command interpreter itself. If you attempt to use QProcess to execute these commands directly, it won't work. One possible solution is to execute the command interpreter itself (cmd.exe on some Windows systems), and ask the interpreter to execute the desired command.

See also QBuffer, QFile, and QTcpSocket.

Member Type Documentation

enum QProcess::​ExitStatus

This enum describes the different exit statuses of QProcess.

ConstantValueDescription
QProcess::NormalExit0The process exited normally.
QProcess::CrashExit1The process crashed.

See also exitStatus().

enum QProcess::​InputChannelMode

This enum describes the process input channel modes of QProcess. Pass one of these values to setInputChannelMode() to set the current write channel mode.

ConstantValueDescription
QProcess::ManagedInputChannel0QProcess manages the input of the running process. This is the default input channel mode of QProcess.
QProcess::ForwardedInputChannel1QProcess forwards the input of the main process onto the running process. The child process reads its standard input from the same source as the main process. Note that the main process must not try to read its standard input while the child process is running.

This enum was introduced or modified in Qt 5.2.

See also setInputChannelMode().

enum QProcess::​ProcessChannel

This enum describes the process channels used by the running process. Pass one of these values to setReadChannel() to set the current read channel of QProcess.

ConstantValueDescription
QProcess::StandardOutput0The standard output (stdout) of the running process.
QProcess::StandardError1The standard error (stderr) of the running process.

See also setReadChannel().

enum QProcess::​ProcessChannelMode

This enum describes the process output channel modes of QProcess. Pass one of these values to setProcessChannelMode() to set the current read channel mode.

ConstantValueDescription
QProcess::SeparateChannels0QProcess manages the output of the running process, keeping standard output and standard error data in separate internal buffers. You can select the QProcess's current read channel by calling setReadChannel(). This is the default channel mode of QProcess.
QProcess::MergedChannels1QProcess merges the output of the running process into the standard output channel (stdout). The standard error channel (stderr) will not receive any data. The standard output and standard error data of the running process are interleaved.
QProcess::ForwardedChannels2QProcess forwards the output of the running process onto the main process. Anything the child process writes to its standard output and standard error will be written to the standard output and standard error of the main process.
QProcess::ForwardedErrorChannel4QProcess manages the standard output of the running process, but forwards its standard error onto the main process. This reflects the typical use of command line tools as filters, where the standard output is redirected to another process or a file, while standard error is printed to the console for diagnostic purposes. (This value was introduced in Qt 5.2.)
QProcess::ForwardedOutputChannel3Complementary to ForwardedErrorChannel. (This value was introduced in Qt 5.2.)

Note: Windows intentionally suppresses output from GUI-only applications to inherited consoles. This does not apply to output redirected to files or pipes. To forward the output of GUI-only applications on the console nonetheless, you must use SeparateChannels and do the forwarding yourself by reading the output and writing it to the appropriate output channels.

See also setProcessChannelMode().

enum QProcess::​ProcessError

This enum describes the different types of errors that are reported by QProcess.

ConstantValueDescription
QProcess::FailedToStart0The process failed to start. Either the invoked program is missing, or you may have insufficient permissions to invoke the program.
QProcess::Crashed1The process crashed some time after starting successfully.
QProcess::Timedout2The last waitFor...() function timed out. The state of QProcess is unchanged, and you can try calling waitFor...() again.
QProcess::WriteError4An error occurred when attempting to write to the process. For example, the process may not be running, or it may have closed its input channel.
QProcess::ReadError3An error occurred when attempting to read from the process. For example, the process may not be running.
QProcess::UnknownError5An unknown error occurred. This is the default return value of error().

See also error().

enum QProcess::​ProcessState

This enum describes the different states of QProcess.

ConstantValueDescription
QProcess::NotRunning0The process is not running.
QProcess::Starting1The process is starting, but the program has not yet been invoked.
QProcess::Running2The process is running and is ready for reading and writing.

See also state().

Member Function Documentation

QProcess::​QProcess(QObject * parent = 0)

Constructs a QProcess object with the given parent.

[virtual] QProcess::​~QProcess()

Destructs the QProcess object, i.e., killing the process.

Note that this function will not return until the process is terminated.

QStringList QProcess::​arguments() const

Returns the command line arguments the process was last started with.

This function was introduced in Qt 5.0.

See also setArguments() and start().

[virtual] bool QProcess::​atEnd() const

Reimplemented from QIODevice::atEnd().

Returns true if the process is not running, and no more data is available for reading; otherwise returns false.

[virtual] qint64 QProcess::​bytesAvailable() const

Reimplemented from QIODevice::bytesAvailable().

[virtual] qint64 QProcess::​bytesToWrite() const

Reimplemented from QIODevice::bytesToWrite().

[virtual] bool QProcess::​canReadLine() const

Reimplemented from QIODevice::canReadLine().

This function operates on the current read channel.

See also readChannel() and setReadChannel().

[virtual] void QProcess::​close()

Reimplemented from QIODevice::close().

Closes all communication with the process and kills it. After calling this function, QProcess will no longer emit readyRead(), and data can no longer be read or written.

void QProcess::​closeReadChannel(ProcessChannel channel)

Closes the read channel channel. After calling this function, QProcess will no longer receive data on the channel. Any data that has already been received is still available for reading.

Call this function to save memory, if you are not interested in the output of the process.

See also closeWriteChannel() and setReadChannel().

void QProcess::​closeWriteChannel()

Schedules the write channel of QProcess to be closed. The channel will close once all data has been written to the process. After calling this function, any attempts to write to the process will fail.

Closing the write channel is necessary for programs that read input data until the channel has been closed. For example, the program "more" is used to display text data in a console on both Unix and Windows. But it will not display the text data until QProcess's write channel has been closed. Example:

QProcess more;
more.start("more");
more.write("Text to display");
more.closeWriteChannel();
// QProcess will emit readyRead() once "more" starts printing

The write channel is implicitly opened when start() is called.

See also closeReadChannel().

QProcess::ProcessError QProcess::​error() const

Returns the type of error that occurred last.

See also state().

[signal] void QProcess::​error(QProcess::ProcessError error)

This signal is emitted when an error occurs with the process. The specified error describes the type of error that occurred.

[static] int QProcess::​execute(const QString & program, const QStringList & arguments)

Starts the program program with the arguments arguments in a new process, waits for it to finish, and then returns the exit code of the process. Any data the new process writes to the console is forwarded to the calling process.

The environment and working directory are inherited from the calling process.

Argument handling is identical to the respective start() overload.

If the process cannot be started, -2 is returned. If the process crashes, -1 is returned. Otherwise, the process' exit code is returned.

See also start().

[static] int QProcess::​execute(const QString & command)

This is an overloaded function.

Starts the program command in a new process, waits for it to finish, and then returns the exit code.

Argument handling is identical to the respective start() overload.

After the command string has been split and unquoted, this function behaves like the overload which takes the arguments as a string list.

See also start().

int QProcess::​exitCode() const

Returns the exit code of the last process that finished.

This value is not valid unless exitStatus() returns NormalExit.

QProcess::ExitStatus QProcess::​exitStatus() const

Returns the exit status of the last process that finished.

On Windows, if the process was terminated with TerminateProcess() from another application, this function will still return NormalExit unless the exit code is less than 0.

This function was introduced in Qt 4.1.

[signal] void QProcess::​finished(int exitCode, QProcess::ExitStatus exitStatus)

This signal is emitted when the process finishes. exitCode is the exit code of the process (only valid for normal exits), and exitStatus is the exit status. After the process has finished, the buffers in QProcess are still intact. You can still read any data that the process may have written before it finished.

See also exitStatus().

InputChannelMode QProcess::​inputChannelMode() const

Returns the channel mode of the QProcess standard input channel.

This function was introduced in Qt 5.2.

See also setInputChannelMode() and InputChannelMode.

[virtual] bool QProcess::​isSequential() const

Reimplemented from QIODevice::isSequential().

[slot] void QProcess::​kill()

Kills the current process, causing it to exit immediately.

On Windows, kill() uses TerminateProcess, and on Unix and OS X, the SIGKILL signal is sent to the process.

See also terminate().

QString QProcess::​nativeArguments() const

Returns the additional native command line arguments for the program.

Note: This function is available only on the Windows platform.

This function was introduced in Qt 4.7.

See also setNativeArguments().

[static] QString QProcess::​nullDevice()

The null device of the operating system.

The returned file path uses native directory separators.

This function was introduced in Qt 5.2.

See also QProcess::setStandardInputFile(), QProcess::setStandardOutputFile(), and QProcess::setStandardErrorFile().

[virtual] bool QProcess::​open(OpenMode mode = ReadWrite)

Reimplemented from QIODevice::open().

Starts the program set by setProgram() with arguments set by setArguments(). The OpenMode is set to mode.

This method is an alias for start(), and exists only to fully implement the interface defined by QIODevice.

See also start(), setProgram(), and setArguments().

ProcessChannelMode QProcess::​processChannelMode() const

Returns the channel mode of the QProcess standard output and standard error channels.

This function was introduced in Qt 4.2.

See also setProcessChannelMode(), ProcessChannelMode, and setReadChannel().

QProcessEnvironment QProcess::​processEnvironment() const

Returns the environment that QProcess will pass to its child process, or an empty object if no environment has been set using setEnvironment() or setProcessEnvironment(). If no environment has been set, the environment of the calling process will be used.

Note: The environment settings are ignored on Windows CE, as there is no concept of an environment.

This function was introduced in Qt 4.6.

See also setProcessEnvironment(), setEnvironment(), and QProcessEnvironment::isEmpty().

qint64 QProcess::​processId() const

Returns the native process identifier for the running process, if available. If no process is currently running, 0 is returned.

This function was introduced in Qt 5.3.

QString QProcess::​program() const

Returns the program the process was last started with.

This function was introduced in Qt 5.0.

See also setProgram() and start().

QByteArray QProcess::​readAllStandardError()

Regardless of the current read channel, this function returns all data available from the standard error of the process as a QByteArray.

See also readyReadStandardError(), readAllStandardOutput(), readChannel(), and setReadChannel().

QByteArray QProcess::​readAllStandardOutput()

Regardless of the current read channel, this function returns all data available from the standard output of the process as a QByteArray.

See also readyReadStandardOutput(), readAllStandardError(), readChannel(), and setReadChannel().

ProcessChannel QProcess::​readChannel() const

Returns the current read channel of the QProcess.

See also setReadChannel().

[virtual protected] qint64 QProcess::​readData(char * data, qint64 maxlen)

Reimplemented from QIODevice::readData().

[signal] void QProcess::​readyReadStandardError()

This signal is emitted when the process has made new data available through its standard error channel (stderr). It is emitted regardless of the current read channel.

See also readAllStandardError() and readChannel().

[signal] void QProcess::​readyReadStandardOutput()

This signal is emitted when the process has made new data available through its standard output channel (stdout). It is emitted regardless of the current read channel.

See also readAllStandardOutput() and readChannel().

void QProcess::​setArguments(const QStringList & arguments)

Set the arguments to pass to the called program when starting the process. This function must be called before start().

This function was introduced in Qt 5.1.

See also start(), setProgram(), and arguments().

void QProcess::​setInputChannelMode(InputChannelMode mode)

Sets the channel mode of the QProcess standard intput channel to the mode specified. This mode will be used the next time start() is called.

This function was introduced in Qt 5.2.

See also inputChannelMode() and InputChannelMode.

void QProcess::​setNativeArguments(const QString & arguments)

This is an overloaded function.

Sets additional native command line arguments for the program.

On operating systems where the system API for passing command line arguments to a subprocess natively uses a single string, one can conceive command lines which cannot be passed via QProcess's portable list-based API. In such cases this function must be used to set a string which is appended to the string composed from the usual argument list, with a delimiting space.

Note: This function is available only on the Windows platform.

This function was introduced in Qt 4.7.

See also nativeArguments().

void QProcess::​setProcessChannelMode(ProcessChannelMode mode)

Sets the channel mode of the QProcess standard output and standard error channels to the mode specified. This mode will be used the next time start() is called. For example:

QProcess builder;
builder.setProcessChannelMode(QProcess::MergedChannels);
builder.start("make", QStringList() << "-j2");

if (!builder.waitForFinished())
    qDebug() << "Make failed:" << builder.errorString();
else
    qDebug() << "Make output:" << builder.readAll();

This function was introduced in Qt 4.2.

See also processChannelMode(), ProcessChannelMode, and setReadChannel().

void QProcess::​setProcessEnvironment(const QProcessEnvironment & environment)

Sets the environment that QProcess will pass to the child process.

For example, the following code adds the environment variable TMPDIR:

QProcess process;
QProcessEnvironment env = QProcessEnvironment::systemEnvironment();
env.insert("TMPDIR", "C:\\MyApp\\temp"); // Add an environment variable
process.setProcessEnvironment(env);
process.start("myapp");

Note how, on Windows, environment variable names are case-insensitive.

This function was introduced in Qt 4.6.

See also processEnvironment(), QProcessEnvironment::systemEnvironment(), and setEnvironment().

[protected] void QProcess::​setProcessState(ProcessState state)

Sets the current state of the QProcess to the state specified.

See also state().

void QProcess::​setProgram(const QString & program)

Set the program to use when starting the process. This function must be called before start().

This function was introduced in Qt 5.1.

See also start(), setArguments(), and program().

void QProcess::​setReadChannel(ProcessChannel channel)

Sets the current read channel of the QProcess to the given channel. The current input channel is used by the functions read(), readAll(), readLine(), and getChar(). It also determines which channel triggers QProcess to emit readyRead().

See also readChannel().

void QProcess::​setStandardErrorFile(const QString & fileName, OpenMode mode = Truncate)

Redirects the process' standard error to the file fileName. When the redirection is in place, the standard error read channel is closed: reading from it using read() will always fail, as will readAllStandardError(). The file will be appended to if mode is Append, otherwise, it will be truncated.

See setStandardOutputFile() for more information on how the file is opened.

Note: if setProcessChannelMode() was called with an argument of QProcess::MergedChannels, this function has no effect.

This function was introduced in Qt 4.2.

See also setStandardInputFile(), setStandardOutputFile(), and setStandardOutputProcess().

void QProcess::​setStandardInputFile(const QString & fileName)

Redirects the process' standard input to the file indicated by fileName. When an input redirection is in place, the QProcess object will be in read-only mode (calling write() will result in error).

To make the process read EOF right away, pass nullDevice() here. This is cleaner than using closeWriteChannel() before writing any data, because it can be set up prior to starting the process.

If the file fileName does not exist at the moment start() is called or is not readable, starting the process will fail.

Calling setStandardInputFile() after the process has started has no effect.

This function was introduced in Qt 4.2.

See also setStandardOutputFile(), setStandardErrorFile(), and setStandardOutputProcess().

void QProcess::​setStandardOutputFile(const QString & fileName, OpenMode mode = Truncate)

Redirects the process' standard output to the file fileName. When the redirection is in place, the standard output read channel is closed: reading from it using read() will always fail, as will readAllStandardOutput().

To discard all standard output from the process, pass nullDevice() here. This is more efficient than simply never reading the standard output, as no QProcess buffers are filled.

If the file fileName doesn't exist at the moment start() is called, it will be created. If it cannot be created, the starting will fail.

If the file exists and mode is QIODevice::Truncate, the file will be truncated. Otherwise (if mode is QIODevice::Append), the file will be appended to.

Calling setStandardOutputFile() after the process has started has no effect.

This function was introduced in Qt 4.2.

See also setStandardInputFile(), setStandardErrorFile(), and setStandardOutputProcess().

void QProcess::​setStandardOutputProcess(QProcess * destination)

Pipes the standard output stream of this process to the destination process' standard input.

The following shell command:

command1 | command2

Can be accomplished with QProcesses with the following code:

QProcess process1;
QProcess process2;

process1.setStandardOutputProcess(&process2);

process1.start("command1");
process2.start("command2");

This function was introduced in Qt 4.2.

void QProcess::​setWorkingDirectory(const QString & dir)

Sets the working directory to dir. QProcess will start the process in this directory. The default behavior is to start the process in the working directory of the calling process.

Note: On QNX, this may cause all application threads to temporarily freeze.

See also workingDirectory() and start().

[virtual protected] void QProcess::​setupChildProcess()

This function is called in the child process context just before the program is executed on Unix or OS X (i.e., after fork(), but before execve()). Reimplement this function to do last minute initialization of the child process. Example:

class SandboxProcess : public QProcess
{
    ...
 protected:
     void setupChildProcess();
    ...
};

void SandboxProcess::setupChildProcess()
{
    // Drop all privileges in the child process, and enter
    // a chroot jail.
#if defined Q_OS_UNIX
    ::setgroups(0, 0);
    ::chroot("/etc/safe");
    ::chdir("/");
    ::setgid(safeGid);
    ::setuid(safeUid);
    ::umask(0);
#endif
}

You cannot exit the process (by calling exit(), for instance) from this function. If you need to stop the program before it starts execution, your workaround is to emit finished() and then call exit().

Warning: This function is called by QProcess on Unix and OS X only. On Windows and QNX, it is not called.

void QProcess::​start(const QString & program, const QStringList & arguments, OpenMode mode = ReadWrite)

Starts the given program in a new process, passing the command line arguments in arguments.

The QProcess object will immediately enter the Starting state. If the process starts successfully, QProcess will emit started(); otherwise, error() will be emitted.

Note: Processes are started asynchronously, which means the started() and error() signals may be delayed. Call waitForStarted() to make sure the process has started (or has failed to start) and those signals have been emitted.

Note: No further splitting of the arguments is performed.

Windows: The arguments are quoted and joined into a command line that is compatible with the CommandLineToArgvW() Windows function. For programs that have different command line quoting requirements, you need to use setNativeArguments().

The OpenMode is set to mode.

If the QProcess object is already running a process, a warning may be printed at the console, and the existing process will continue running unaffected.

See also pid(), started(), waitForStarted(), and setNativeArguments().

void QProcess::​start(OpenMode mode = ReadWrite)

This is an overloaded function.

Starts the program set by setProgram() with arguments set by setArguments(). The OpenMode is set to mode.

This function was introduced in Qt 5.1.

See also open(), setProgram(), and setArguments().

void QProcess::​start(const QString & command, OpenMode mode = ReadWrite)

This is an overloaded function.

Starts the command command in a new process. The OpenMode is set to mode.

command is a single string of text containing both the program name and its arguments. The arguments are separated by one or more spaces. For example:

QProcess process;
process.start("del /s *.txt");
// same as process.start("del", QStringList() << "/s" << "*.txt");
...

Arguments containing spaces must be quoted to be correctly supplied to the new process. For example:

QProcess process;
process.start("dir \"My Documents\"");

Literal quotes in the command string are represented by triple quotes. For example:

QProcess process;
process.start("dir \"Epic 12\"\"\" Singles\"");

After the command string has been split and unquoted, this function behaves like the overload which takes the arguments as a string list.

[static] bool QProcess::​startDetached(const QString & program, const QStringList & arguments, const QString & workingDirectory = QString(), qint64 * pid = 0)

Starts the program program with the arguments arguments in a new process, and detaches from it. Returns true on success; otherwise returns false. If the calling process exits, the detached process will continue to run unaffected.

Argument handling is identical to the respective start() overload.

Unix: The started process will run in its own session and act like a daemon.

The process will be started in the directory workingDirectory. If workingDirectory is empty, the working directory is inherited from the calling process.

Note: On QNX, this may cause all application threads to temporarily freeze.

If the function is successful then *pid is set to the process identifier of the started process.

See also start().

[static] bool QProcess::​startDetached(const QString & command)

This is an overloaded function.

Starts the command command in a new process, and detaches from it. Returns true on success; otherwise returns false.

Argument handling is identical to the respective start() overload.

After the command string has been split and unquoted, this function behaves like the overload which takes the arguments as a string list.

See also start().

[signal] void QProcess::​started()

This signal is emitted by QProcess when the process has started, and state() returns Running.

QProcess::ProcessState QProcess::​state() const

Returns the current state of the process.

See also stateChanged() and error().

[signal] void QProcess::​stateChanged(QProcess::ProcessState newState)

This signal is emitted whenever the state of QProcess changes. The newState argument is the state QProcess changed to.

[static] QStringList QProcess::​systemEnvironment()

Returns the environment of the calling process as a list of key=value pairs. Example:

QStringList environment = QProcess::systemEnvironment();
// environment = {"PATH=/usr/bin:/usr/local/bin",
//                "USER=greg", "HOME=/home/greg"}

This function does not cache the system environment. Therefore, it's possible to obtain an updated version of the environment if low-level C library functions like setenv ot putenv have been called.

However, note that repeated calls to this function will recreate the list of environment variables, which is a non-trivial operation.

Note: For new code, it is recommended to use QProcessEnvironment::systemEnvironment()

This function was introduced in Qt 4.1.

See also QProcessEnvironment::systemEnvironment(), environment(), and setEnvironment().

[slot] void QProcess::​terminate()

Attempts to terminate the process.

The process may not exit as a result of calling this function (it is given the chance to prompt the user for any unsaved files, etc).

On Windows, terminate() posts a WM_CLOSE message to all toplevel windows of the process and then to the main thread of the process itself. On Unix and OS X the SIGTERM signal is sent.

Console applications on Windows that do not run an event loop, or whose event loop does not handle the WM_CLOSE message, can only be terminated by calling kill().

See also kill().

[virtual] bool QProcess::​waitForBytesWritten(int msecs = 30000)

Reimplemented from QIODevice::waitForBytesWritten().

bool QProcess::​waitForFinished(int msecs = 30000)

Blocks until the process has finished and the finished() signal has been emitted, or until msecs milliseconds have passed.

Returns true if the process finished; otherwise returns false (if the operation timed out, if an error occurred, or if this QProcess is already finished).

This function can operate without an event loop. It is useful when writing non-GUI applications and when performing I/O operations in a non-GUI thread.

Warning: Calling this function from the main (GUI) thread might cause your user interface to freeze.

If msecs is -1, this function will not time out.

See also finished(), waitForStarted(), waitForReadyRead(), and waitForBytesWritten().

[virtual] bool QProcess::​waitForReadyRead(int msecs = 30000)

Reimplemented from QIODevice::waitForReadyRead().

bool QProcess::​waitForStarted(int msecs = 30000)

Blocks until the process has started and the started() signal has been emitted, or until msecs milliseconds have passed.

Returns true if the process was started successfully; otherwise returns false (if the operation timed out or if an error occurred).

This function can operate without an event loop. It is useful when writing non-GUI applications and when performing I/O operations in a non-GUI thread.

Warning: Calling this function from the main (GUI) thread might cause your user interface to freeze.

If msecs is -1, this function will not time out.

See also started(), waitForReadyRead(), waitForBytesWritten(), and waitForFinished().

QString QProcess::​workingDirectory() const

If QProcess has been assigned a working directory, this function returns the working directory that the QProcess will enter before the program has started. Otherwise, (i.e., no directory has been assigned,) an empty string is returned, and QProcess will use the application's current working directory instead.

See also setWorkingDirectory().

[virtual protected] qint64 QProcess::​writeData(const char * data, qint64 len)

Reimplemented from QIODevice::writeData().

Related Non-Members

typedef Q_PID

Typedef for the identifiers used to represent processes on the underlying platform. On Unix, this corresponds to qint64; on Windows, it corresponds to _PROCESS_INFORMATION*.

See also QProcess::pid().

© 2015 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.