padnavigator.cpp Example File

graphicsview/padnavigator/padnavigator.cpp
/****************************************************************************
**
** Copyright (C) 2013 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** You may use this file under the terms of the BSD license as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names
**     of its contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "flippablepad.h"
#include "padnavigator.h"
#include "splashitem.h"

#ifndef QT_NO_OPENGL
#include <QtOpenGL>
#else
#include <QtWidgets>
#endif

PadNavigator::PadNavigator(const QSize &size, QWidget *parent)
    : QGraphicsView(parent)
{
    // Splash item
    SplashItem *splash = new SplashItem;
    splash->setZValue(1);

    // Pad item
    FlippablePad *pad = new FlippablePad(size);
    QGraphicsRotation *flipRotation = new QGraphicsRotation(pad);
    QGraphicsRotation *xRotation = new QGraphicsRotation(pad);
    QGraphicsRotation *yRotation = new QGraphicsRotation(pad);
    flipRotation->setAxis(Qt::YAxis);
    xRotation->setAxis(Qt::YAxis);
    yRotation->setAxis(Qt::XAxis);
    pad->setTransformations(QList<QGraphicsTransform *>()
                            << flipRotation
                            << xRotation << yRotation);

    // Back (proxy widget) item
    QGraphicsProxyWidget *backItem = new QGraphicsProxyWidget(pad);
    QWidget *widget = new QWidget;
    form.setupUi(widget);
    form.hostName->setFocus();
    backItem->setWidget(widget);
    backItem->setVisible(false);
    backItem->setFocus();
    backItem->setCacheMode(QGraphicsItem::ItemCoordinateCache);
    const QRectF r = backItem->rect();
    backItem->setTransform(QTransform()
                           .rotate(180, Qt::YAxis)
                           .translate(-r.width()/2, -r.height()/2));

    // Selection item
    RoundRectItem *selectionItem = new RoundRectItem(QRectF(-60, -60, 120, 120), Qt::gray, pad);
    selectionItem->setZValue(0.5);

    // Splash animations
    QPropertyAnimation *smoothSplashMove = new QPropertyAnimation(splash, "y");
    QPropertyAnimation *smoothSplashOpacity = new QPropertyAnimation(splash, "opacity");
    smoothSplashMove->setEasingCurve(QEasingCurve::InQuad);
    smoothSplashMove->setDuration(250);
    smoothSplashOpacity->setDuration(250);

    // Selection animation
    QPropertyAnimation *smoothXSelection = new QPropertyAnimation(selectionItem, "x");
    QPropertyAnimation *smoothYSelection = new QPropertyAnimation(selectionItem, "y");
    QPropertyAnimation *smoothXRotation = new QPropertyAnimation(xRotation, "angle");
    QPropertyAnimation *smoothYRotation = new QPropertyAnimation(yRotation, "angle");
    smoothXSelection->setDuration(125);
    smoothYSelection->setDuration(125);
    smoothXRotation->setDuration(125);
    smoothYRotation->setDuration(125);
    smoothXSelection->setEasingCurve(QEasingCurve::InOutQuad);
    smoothYSelection->setEasingCurve(QEasingCurve::InOutQuad);
    smoothXRotation->setEasingCurve(QEasingCurve::InOutQuad);
    smoothYRotation->setEasingCurve(QEasingCurve::InOutQuad);

    // Flip animation setup
    QPropertyAnimation *smoothFlipRotation = new QPropertyAnimation(flipRotation, "angle");
    QPropertyAnimation *smoothFlipScale = new QPropertyAnimation(pad, "scale");
    QPropertyAnimation *smoothFlipXRotation = new QPropertyAnimation(xRotation, "angle");
    QPropertyAnimation *smoothFlipYRotation = new QPropertyAnimation(yRotation, "angle");
    QParallelAnimationGroup *flipAnimation = new QParallelAnimationGroup(this);
    smoothFlipScale->setDuration(500);
    smoothFlipRotation->setDuration(500);
    smoothFlipXRotation->setDuration(500);
    smoothFlipYRotation->setDuration(500);
    smoothFlipScale->setEasingCurve(QEasingCurve::InOutQuad);
    smoothFlipRotation->setEasingCurve(QEasingCurve::InOutQuad);
    smoothFlipXRotation->setEasingCurve(QEasingCurve::InOutQuad);
    smoothFlipYRotation->setEasingCurve(QEasingCurve::InOutQuad);
    smoothFlipScale->setKeyValueAt(0, qvariant_cast<qreal>(1.0));
    smoothFlipScale->setKeyValueAt(0.5, qvariant_cast<qreal>(0.7));
    smoothFlipScale->setKeyValueAt(1, qvariant_cast<qreal>(1.0));
    flipAnimation->addAnimation(smoothFlipRotation);
    flipAnimation->addAnimation(smoothFlipScale);
    flipAnimation->addAnimation(smoothFlipXRotation);
    flipAnimation->addAnimation(smoothFlipYRotation);

    // Flip animation delayed property assignment
    QSequentialAnimationGroup *setVariablesSequence = new QSequentialAnimationGroup;
    QPropertyAnimation *setFillAnimation = new QPropertyAnimation(pad, "fill");
    QPropertyAnimation *setBackItemVisibleAnimation = new QPropertyAnimation(backItem, "visible");
    QPropertyAnimation *setSelectionItemVisibleAnimation = new QPropertyAnimation(selectionItem, "visible");
    setFillAnimation->setDuration(0);
    setBackItemVisibleAnimation->setDuration(0);
    setSelectionItemVisibleAnimation->setDuration(0);
    setVariablesSequence->addPause(250);
    setVariablesSequence->addAnimation(setBackItemVisibleAnimation);
    setVariablesSequence->addAnimation(setSelectionItemVisibleAnimation);
    setVariablesSequence->addAnimation(setFillAnimation);
    flipAnimation->addAnimation(setVariablesSequence);

    // Build the state machine
    QStateMachine *stateMachine = new QStateMachine(this);
    QState *splashState = new QState(stateMachine);
    QState *frontState = new QState(stateMachine);
    QHistoryState *historyState = new QHistoryState(frontState);
    QState *backState = new QState(stateMachine);
    frontState->assignProperty(pad, "fill", false);
    frontState->assignProperty(splash, "opacity", 0.0);
    frontState->assignProperty(backItem, "visible", false);
    frontState->assignProperty(flipRotation, "angle", qvariant_cast<qreal>(0.0));
    frontState->assignProperty(selectionItem, "visible", true);
    backState->assignProperty(pad, "fill", true);
    backState->assignProperty(backItem, "visible", true);
    backState->assignProperty(xRotation, "angle", qvariant_cast<qreal>(0.0));
    backState->assignProperty(yRotation, "angle", qvariant_cast<qreal>(0.0));
    backState->assignProperty(flipRotation, "angle", qvariant_cast<qreal>(180.0));
    backState->assignProperty(selectionItem, "visible", false);
    stateMachine->addDefaultAnimation(smoothXRotation);
    stateMachine->addDefaultAnimation(smoothYRotation);
    stateMachine->addDefaultAnimation(smoothXSelection);
    stateMachine->addDefaultAnimation(smoothYSelection);
    stateMachine->setInitialState(splashState);

    // Transitions
    QEventTransition *anyKeyTransition = new QEventTransition(this, QEvent::KeyPress, splashState);
    anyKeyTransition->setTargetState(frontState);
    anyKeyTransition->addAnimation(smoothSplashMove);
    anyKeyTransition->addAnimation(smoothSplashOpacity);

    QKeyEventTransition *enterTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                   Qt::Key_Enter, backState);
    QKeyEventTransition *returnTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                    Qt::Key_Return, backState);
    QKeyEventTransition *backEnterTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                       Qt::Key_Enter, frontState);
    QKeyEventTransition *backReturnTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                        Qt::Key_Return, frontState);
    enterTransition->setTargetState(historyState);
    returnTransition->setTargetState(historyState);
    backEnterTransition->setTargetState(backState);
    backReturnTransition->setTargetState(backState);
    enterTransition->addAnimation(flipAnimation);
    returnTransition->addAnimation(flipAnimation);
    backEnterTransition->addAnimation(flipAnimation);
    backReturnTransition->addAnimation(flipAnimation);

    // Create substates for each icon; store in temporary grid.
    int columns = size.width();
    int rows = size.height();
    QVector< QVector< QState * > > stateGrid;
    stateGrid.resize(rows);
    for (int y = 0; y < rows; ++y) {
        stateGrid[y].resize(columns);
        for (int x = 0; x < columns; ++x)
            stateGrid[y][x] = new QState(frontState);
    }
    frontState->setInitialState(stateGrid[0][0]);
    selectionItem->setPos(pad->iconAt(0, 0)->pos());

    // Enable key navigation using state transitions
    for (int y = 0; y < rows; ++y) {
        for (int x = 0; x < columns; ++x) {
            QState *state = stateGrid[y][x];
            QKeyEventTransition *rightTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                           Qt::Key_Right, state);
            QKeyEventTransition *leftTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                          Qt::Key_Left, state);
            QKeyEventTransition *downTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                          Qt::Key_Down, state);
            QKeyEventTransition *upTransition = new QKeyEventTransition(this, QEvent::KeyPress,
                                                                        Qt::Key_Up, state);
            rightTransition->setTargetState(stateGrid[y][(x + 1) % columns]);
            leftTransition->setTargetState(stateGrid[y][((x - 1) + columns) % columns]);
            downTransition->setTargetState(stateGrid[(y + 1) % rows][x]);
            upTransition->setTargetState(stateGrid[((y - 1) + rows) % rows][x]);
            RoundRectItem *icon = pad->iconAt(x, y);
            state->assignProperty(xRotation, "angle", -icon->x() / 6.0);
            state->assignProperty(yRotation, "angle", icon->y() / 6.0);
            state->assignProperty(selectionItem, "x", icon->x());
            state->assignProperty(selectionItem, "y", icon->y());
            frontState->assignProperty(icon, "visible", true);
            backState->assignProperty(icon, "visible", false);

            QPropertyAnimation *setIconVisibleAnimation = new QPropertyAnimation(icon, "visible");
            setIconVisibleAnimation->setDuration(0);
            setVariablesSequence->addAnimation(setIconVisibleAnimation);
        }
    }

    // Scene
    QGraphicsScene *scene = new QGraphicsScene(this);
    scene->setBackgroundBrush(QPixmap(":/images/blue_angle_swirl.jpg"));
    scene->setItemIndexMethod(QGraphicsScene::NoIndex);
    scene->addItem(pad);
    scene->setSceneRect(scene->itemsBoundingRect());
    setScene(scene);

    // Adjust splash item to scene contents
    const QRectF sbr = splash->boundingRect();
    splash->setPos(-sbr.width() / 2, scene->sceneRect().top() - 2);
    frontState->assignProperty(splash, "y", splash->y() - 100.0);
    scene->addItem(splash);

    // View
    setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
    setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
    setMinimumSize(50, 50);
    setViewportUpdateMode(FullViewportUpdate);
    setCacheMode(CacheBackground);
    setRenderHints(QPainter::Antialiasing
                   | QPainter::SmoothPixmapTransform
                   | QPainter::TextAntialiasing);
#ifndef QT_NO_OPENGL
    setViewport(new QOpenGLWidget);
#endif

    stateMachine->start();
}

void PadNavigator::resizeEvent(QResizeEvent *event)
{
    QGraphicsView::resizeEvent(event);
    fitInView(scene()->sceneRect(), Qt::KeepAspectRatio);
}

© 2015 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.