mapviewer.qml Example File

mapviewer/mapviewer.qml
/****************************************************************************
**
** Copyright (C) 2015 The Qt Company Ltd.
** Contact: http://www.qt.io/licensing/
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** You may use this file under the terms of the BSD license as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of The Qt Company Ltd nor the names of its
**     contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

import QtQuick 2.5
import QtQuick.Controls 1.4
import QtLocation 5.6
import QtPositioning 5.5
import "map"
import "menus"
import "helper.js" as Helper

ApplicationWindow {
    id: appWindow
    property variant map
    property variant minimap
    property variant parameters

    //defaults
    property variant fromCoordinate: QtPositioning.coordinate(59.9483, 10.7695)
    property variant toCoordinate: QtPositioning.coordinate(59.9645, 10.671)

    function createMap(provider)
    {
        var plugin

        if (parameters && parameters.length>0)
            plugin = Qt.createQmlObject ('import QtLocation 5.6; Plugin{ name:"' + provider + '"; parameters: appWindow.parameters}', appWindow)
        else
            plugin = Qt.createQmlObject ('import QtLocation 5.6; Plugin{ name:"' + provider + '"}', appWindow)

        if (minimap) {
            minimap.destroy()
            minimap = null
        }

        var zoomLevel = null
        var center = null
        if (map) {
            zoomLevel = map.zoomLevel
            center = map.center
            map.destroy()
        }

        map = mapComponent.createObject(page);
        map.plugin = plugin;

        if (zoomLevel != null) {
            map.zoomLevel = zoomLevel
            map.center = center
        } else {
            map.zoomLevel = (map.maximumZoomLevel - map.minimumZoomLevel)/2
        }

        map.forceActiveFocus()
    }

    function getPlugins()
    {
        var plugin = Qt.createQmlObject ('import QtLocation 5.6; Plugin {}', appWindow)
        var myArray = new Array()
        for (var i = 0; i<plugin.availableServiceProviders.length; i++) {
            var tempPlugin = Qt.createQmlObject ('import QtLocation 5.6; Plugin {name: "' + plugin.availableServiceProviders[i]+ '"}', appWindow)
            if (tempPlugin.supportsMapping())
                myArray.push(tempPlugin.name)
        }
        myArray.sort()
        return myArray
    }

    function initializeProviders(pluginParameters)
    {
        var parameters = new Array()
        for (var prop in pluginParameters){
            var parameter = Qt.createQmlObject('import QtLocation 5.6; PluginParameter{ name: "'+ prop + '"; value: "' + pluginParameters[prop]+'"}',appWindow)
            parameters.push(parameter)
        }
        appWindow.parameters = parameters
        var plugins = getPlugins()
        mainMenu.providerMenu.createMenu(plugins)
        for (var i = 0; i<plugins.length; i++) {
            if (plugins[i] === "osm")
                mainMenu.selectProvider(plugins[i])
        }
    }

    title: qsTr("Mapviewer")
    height: 640
    width: 360
    visible: true
    menuBar: mainMenu

    Address {
        id :fromAddress
        street: "Sandakerveien 116"
        city: "Oslo"
        country: "Norway"
        state : ""
        postalCode: "0484"
    }

    Address {
        id: toAddress
        street: "Holmenkollveien 140"
        city: "Oslo"
        country: "Norway"
        postalCode: "0791"
    }

    MainMenu {
        id: mainMenu

        function toggleMiniMapState()
        {
            if (minimap) {
                minimap.destroy()
                minimap = null
            } else {
                minimap = Qt.createQmlObject ('import "map"; MiniMap{ z: map.z + 2 }', map)
            }
        }

        function setLanguage(lang)
        {
            map.plugin.locales = lang;
            stackView.pop(page)
        }

        onSelectProvider: {
            stackView.pop()
            for (var i = 0; i < providerMenu.items.length; i++) {
                providerMenu.items[i].checked = providerMenu.items[i].text === providerName
            }

            createMap(providerName)
            if (map.error === Map.NoError) {
                selectMapType(map.activeMapType)
                toolsMenu.createMenu(map);
            } else {
                mapTypeMenu.clear();
                toolsMenu.clear();
            }
        }

        onSelectMapType: {
            stackView.pop(page)
            for (var i = 0; i < mapTypeMenu.items.length; i++) {
                mapTypeMenu.items[i].checked = mapTypeMenu.items[i].text === mapType.name
            }
            map.activeMapType = mapType
        }

        onSelectTool: {
            switch (tool) {
            case "AddressRoute":
                stackView.pop({item:page, immediate: true})
                stackView.push({ item: Qt.resolvedUrl("forms/RouteAddress.qml") ,
                                   properties: { "plugin": map.plugin,
                                       "toAddress": toAddress,
                                       "fromAddress": fromAddress}})
                stackView.currentItem.showRoute.connect(map.calculateCoordinateRoute)
                stackView.currentItem.showMessage.connect(stackView.showMessage)
                stackView.currentItem.closeForm.connect(stackView.closeForm)
                break
            case "CoordinateRoute":
                stackView.pop({item:page, immediate: true})
                stackView.push({ item: Qt.resolvedUrl("forms/RouteCoordinate.qml") ,
                                   properties: { "toCoordinate": toCoordinate,
                                       "fromCoordinate": fromCoordinate}})
                stackView.currentItem.showRoute.connect(map.calculateCoordinateRoute)
                stackView.currentItem.closeForm.connect(stackView.closeForm)
                break
            case "Geocode":
                stackView.pop({item:page, immediate: true})
                stackView.push({ item: Qt.resolvedUrl("forms/Geocode.qml") ,
                                   properties: { "address": fromAddress}})
                stackView.currentItem.showPlace.connect(map.geocode)
                stackView.currentItem.closeForm.connect(stackView.closeForm)
                break
            case "RevGeocode":
                stackView.pop({item:page, immediate: true})
                stackView.push({ item: Qt.resolvedUrl("forms/ReverseGeocode.qml") ,
                                   properties: { "coordinate": fromCoordinate}})
                stackView.currentItem.showPlace.connect(map.geocode)
                stackView.currentItem.closeForm.connect(stackView.closeForm)
                break
            case "Language":
                stackView.pop({item:page, immediate: true})
                stackView.push({ item: Qt.resolvedUrl("forms/Locale.qml") ,
                                   properties: { "locale":  map.plugin.locales[0]}})
                stackView.currentItem.selectLanguage.connect(setLanguage)
                stackView.currentItem.closeForm.connect(stackView.closeForm)
                break
            case "Clear":
                map.clearData()
                break
            case "Prefetch":
                map.prefetchData()
                break
            default:
                console.log("Unsupported operation")
            }
        }

        onToggleMapState: {
            stackView.pop(page)
            switch (state) {
            case "FollowMe":
                map.followme = !map.followme
                break
            case "MiniMap":
                toggleMiniMapState()
                isMiniMap = minimap
                break
            default:
                console.log("Unsupported operation")
            }
        }
    }

    MapPopupMenu {
        id: mapPopupMenu

        function show(coordinate)
        {
            stackView.pop(page)
            mapPopupMenu.coordinate = coordinate
            mapPopupMenu.markersCount = map.markers.length
            mapPopupMenu.mapItemsCount = map.mapItems.length
            mapPopupMenu.update()
            mapPopupMenu.popup()
        }

        onItemClicked: {
            stackView.pop(page)
            switch (item) {
            case "addMarker":
                map.addMarker()
                break
            case "getCoordinate":
                map.coordinatesCaptured(coordinate.latitude, coordinate.longitude)
                break
            case "fitViewport":
                map.fitViewportToMapItems()
                break
            case "deleteMarkers":
                map.deleteMarkers()
                break
            case "deleteItems":
                map.deleteMapItems()
                break
            default:
                console.log("Unsupported operation")
            }
        }
    }

    MarkerPopupMenu {
        id: markerPopupMenu

        function show(coordinate)
        {
            stackView.pop(page)
            markerPopupMenu.markersCount = map.markers.length
            markerPopupMenu.update()
            markerPopupMenu.popup()
        }

        function askForCoordinate()
        {
            stackView.push({ item: Qt.resolvedUrl("forms/ReverseGeocode.qml") ,
                               properties: { "title": qsTr("New Coordinate"),
                                   "coordinate":   map.markers[map.currentMarker].coordinate}})
            stackView.currentItem.showPlace.connect(moveMarker)
            stackView.currentItem.closeForm.connect(stackView.closeForm)
        }

        function moveMarker(coordinate)
        {
            map.markers[map.currentMarker].coordinate = coordinate;
            map.center = coordinate;
            stackView.pop(page)
        }

        onItemClicked: {
            stackView.pop(page)
            switch (item) {
            case "deleteMarker":
                map.deleteMarker(map.currentMarker)
                break;
            case "getMarkerCoordinate":
                map.coordinatesCaptured(map.markers[map.currentMarker].coordinate.latitude, map.markers[map.currentMarker].coordinate.longitude)
                break;
            case "moveMarkerTo":
                askForCoordinate()
                break;
            case "routeToNextPoint":
            case "routeToNextPoints":
                map.calculateMarkerRoute()
                break
            case "distanceToNextPoint":
                var coordinate1 = map.markers[currentMarker].coordinate;
                var coordinate2 = map.markers[currentMarker+1].coordinate;
                var distance = Helper.formatDistance(coordinate1.distanceTo(coordinate2));
                stackView.showMessage(qsTr("Distance"),"<b>" + qsTr("Distance:") + "</b> " + distance)
                break
            case "drawImage":
                map.addGeoItem("ImageItem")
                break
            case "drawRectangle":
                map.addGeoItem("RectangleItem")
                break
            case "drawCircle":
                map.addGeoItem("CircleItem")
                break;
            case "drawPolyline":
                map.addGeoItem("PolylineItem")
                break;
            case "drawPolygonMenu":
                map.addGeoItem("PolygonItem")
                break
            default:
                console.log("Unsupported operation")
            }
        }
    }

    ItemPopupMenu {
        id: itemPopupMenu

        function show(type,coordinate)
        {
            stackView.pop(page)
            itemPopupMenu.type = type
            itemPopupMenu.update()
            itemPopupMenu.popup()
        }

        onItemClicked: {
            stackView.pop(page)
            switch (item) {
            case "showRouteInfo":
                stackView.showRouteListPage()
                break;
            case "deleteRoute":
                map.routeModel.reset();
                break;
            case "showPointInfo":
                map.showGeocodeInfo()
                break;
            case "deletePoint":
                map.geocodeModel.reset()
                break;
            default:
                console.log("Unsupported operation")
            }
        }
    }

    StackView {
        id: stackView
        anchors.fill: parent
        focus: true
        initialItem: Item {
            id: page
        }

        function showMessage(title,message,backPage)
        {
            push({ item: Qt.resolvedUrl("forms/Message.qml") ,
                               properties: {
                                   "title" : title,
                                   "message" : message,
                                   "backPage" : backPage
                               }})
            currentItem.closeForm.connect(closeMessage)
        }

        function closeMessage(backPage)
        {
            pop(backPage)
        }

        function closeForm()
        {
            pop(page)
        }

        function showRouteListPage()
        {
            push({ item: Qt.resolvedUrl("forms/RouteList.qml") ,
                               properties: {
                                   "routeModel" : map.routeModel
                               }})
            currentItem.closeForm.connect(closeForm)
        }
    }

    Component {
        id: mapComponent

        MapComponent{
            width: page.width
            height: page.height
            onFollowmeChanged: mainMenu.isFollowMe = map.followme
            onSupportedMapTypesChanged: mainMenu.mapTypeMenu.createMenu(map)
            onCoordinatesCaptured: {
                var text = "<b>" + qsTr("Latitude:") + "</b> " + Helper.roundNumber(latitude,4) + "<br/><b>" + qsTr("Longitude:") + "</b> " + Helper.roundNumber(longitude,4)
                stackView.showMessage(qsTr("Coordinates"),text);
            }
            onGeocodeFinished:{
                if (map.geocodeModel.status == GeocodeModel.Ready) {
                    if (map.geocodeModel.count == 0) {
                        stackView.showMessage(qsTr("Geocode Error"),qsTr("Unsuccessful geocode"))
                    } else if (map.geocodeModel.count > 1) {
                        stackView.showMessage(qsTr("Ambiguous geocode"), map.geocodeModel.count + " " +
                                              qsTr("results found for the given address, please specify location"))
                    } else {
                        stackView.showMessage(qsTr("Location"), geocodeMessage(),page)
                    }
                } else if (map.geocodeModel.status == GeocodeModel.Error) {
                    stackView.showMessage(qsTr("Geocode Error"),qsTr("Unsuccessful geocode"))
                }
            }
            onRouteError: stackView.showMessage(qsTr("Route Error"),qsTr("Unable to find a route for the given points"),page)

            onShowGeocodeInfo: stackView.showMessage(qsTr("Location"),geocodeMessage(),page)

            onErrorChanged: {
                if (map.error != Map.NoError) {
                    var title = qsTr("ProviderError")
                    var message =  map.errorString + "<br/><br/><b>" + qsTr("Try to select other provider") + "</b>"
                    if (map.error == Map.MissingRequiredParameterError)
                        message += "<br/>" + qsTr("or see") + " \'mapviewer --help\' "
                                + qsTr("how to pass plugin parameters.")
                    stackView.showMessage(title,message);
                }
            }
            onShowMainMenu: mapPopupMenu.show(coordinate)
            onShowMarkerMenu: markerPopupMenu.show(coordinate)
            onShowRouteMenu: itemPopupMenu.show("Route",coordinate)
            onShowPointMenu: itemPopupMenu.show("Point",coordinate)
            onShowRouteList: stackView.showRouteListPage()
        }
    }
}

© 2017 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.