Product SiteDocumentation Site

Chapter 4. Network Interfaces

4.1. Network Configuration Files
4.2. Interface Configuration Files
4.2.1. Ethernet Interfaces
4.2.2. Channel Bonding Interfaces
4.2.3. Alias and Clone Files
4.2.4. Dialup Interfaces
4.2.5. Other Interfaces
4.3. Interface Control Scripts
4.4. Configuring Static Routes
4.5. Network Function Files
4.6. Additional Resources
4.6.1. Installed Documentation
Under Red Hat Enterprise Linux, all network communications occur between configured software interfaces and physical networking devices connected to the system.
The configuration files for network interfaces are located in the /etc/sysconfig/network-scripts/ directory. The scripts used to activate and deactivate these network interfaces are also located here. Although the number and type of interface files can differ from system to system, there are three categories of files that exist in this directory:
  1. Interface configuration files
  2. Interface control scripts
  3. Network function files
The files in each of these categories work together to enable various network devices.
This chapter explores the relationship between these files and how they are used.

4.1. Network Configuration Files

Before delving into the interface configuration files, let us first itemize the primary configuration files used in network configuration. Understanding the role these files play in setting up the network stack can be helpful when customizing a Red Hat Enterprise Linux system.
The primary network configuration files are as follows:
/etc/hosts
The main purpose of this file is to resolve hostnames that cannot be resolved any other way. It can also be used to resolve hostnames on small networks with no DNS server. Regardless of the type of network the computer is on, this file should contain a line specifying the IP address of the loopback device (127.0.0.1) as localhost.localdomain. For more information, refer to the hosts man page.
/etc/resolv.conf
This file specifies the IP addresses of DNS servers and the search domain. Unless configured to do otherwise, the network initialization scripts populate this file. For more information about this file, refer to the resolv.conf man page.
/etc/sysconfig/network
This file specifies routing and host information for all network interfaces. For more information about this file and the directives it accepts, refer to Section 18.1.13, “ /etc/sysconfig/network.
/etc/sysconfig/network-scripts/ifcfg-<interface-name>
For each network interface, there is a corresponding interface configuration script. Each of these files provide information specific to a particular network interface. Refer to Section 4.2, “Interface Configuration Files” for more information on this type of file and the directives it accepts.

Warning

The /etc/sysconfig/networking/ directory is used by the Network Administration Tool (system-config-network) and its contents should not be edited manually. Using only one method for network configuration is strongly encouraged, due to the risk of configuration deletion.
For more information about configuring network interfaces using the Network Administration Tool, refer to Chapter 5, Network Configuration